HUANANZHI X11D 16D

Contents

HUANANZHI X11D-16D Motherboard User Manual

Intel XEON 1st and 2nd Gen Dual CPU DDR4 RECC Server Kit

1. Introduction

Thank you for choosing the HUANANZHI X11D-16D Motherboard. This manual provides detailed instructions for the proper installation, setup, and operation of your motherboard. Please read this manual thoroughly before proceeding with installation to ensure optimal performance and prevent damage.

1.1 Key Features

  • CPU Support: Intel® LGA3647 Processor (Intel® Xeon™ 1st and 2nd Gen)
  • RAM: 16 x DIMM slots, supporting up to 2TB DDR4 2933/2666/2400/2133MHz Non-ECC/ECC memory. Single U6 channel architecture.
  • I/O Interfaces:
    • 14 x SATA3.0 ports (12 SATA nodes require SAS SFF8087 to SATA adapter cable, supporting RAID 0/1/5/10)
    • 2 x USB 2.0 interfaces
    • 2 x USB 3.0 ports
    • 1 x VGA Display Interface
    • 1 x COM Display Interface
    • 2 x RJ45 Network Card Interfaces
    • 1 x IPMI Management Port
  • Ethernet: 2 x Intel I210-V Gigabit Ports
  • Expansion Slots:
    • 4 x PCIe 3.0 x16
    • 2 x PCIe 3.0 x8
    • 1 x M.2 NVME PCIe 3.0X4 (key M) 2280
    • 1 x M.2 NVME PCIe 3.0X4 (key M) 22110
    • 2 x OCULink PCIE3.0X4
  • Form Factor: 325mm x 330mm E-ATX
HUANANZHI X11D-16D Motherboard with key features highlighted
Figure 1.1: HUANANZHI X11D-16D Motherboard with key features highlighted.
Diagram illustrating various features of the HUANANZHI X11D-16D Motherboard
Figure 1.2: Detailed feature overview of the motherboard.

2. Safety Precautions

Attention: Please look carefully at the motherboard. A '1' or white thick line markpin indicates the 1st position for connectors.

  • Products can be damaged by electrostatic discharge (ESD). Follow these steps for successful computer assembly:
  • Ensure all parts are firmly connected. Loose connections can lead to component recognition failure or prevent the computer from starting.
  • To prevent ESD damage, discharge your body static by touching other metal objects before handling the motherboard.
  • Hold the motherboard by its borders. Avoid touching sensitive parts.
  • Store the motherboard in an anti-static container or on an anti-static pad when not in use.
  • Before powering on the computer, ensure all internal components are firmly connected, with no loose screws or metal parts.
  • Do not power on the computer before installation is complete. This can cause permanent damage to components or injury.
  • If you need assistance, contact HUANANZHI after-sales customer service at business@huananzhi.com.
  • Always switch off the power and unplug the power cable before installing or disassembling components.

3. Packing Contents

Please verify the contents of your package upon receipt. If any items are damaged or missing, contact your vendor immediately.

  • 1 x HUANANZHI X11D-16D Dual Channel Motherboard
  • 2 x SATA Data Cables
  • 1 x I/O Shield Back Plate
  • 1 x Warranty Card

4. Motherboard Layout

Detailed top-down view of the HUANANZHI X11D-16D Motherboard
Figure 4.1: X11D-16D Dual Mainboard Diagram.

4.1 Rear I/O Panel

Rear I/O panel of the HUANANZHI X11D-16D Motherboard
Figure 4.2: Rear I/O Panel Layout.

The rear I/O panel includes the following ports:

  • IPMI Management Network Port: For remote management.
  • COM Port: Serial communication port.
  • USB 3.0 Ports: High-speed USB connectivity.
  • USB 2.0 Ports: Standard USB connectivity.
  • RJ45 Network Ports: For Ethernet connections.
  • VGA Port: Video output for display.

4.2 LAN Port Status Table

Connection/Working Light StatusDescriptionSpeed Signal StatusDescription
CloseNetwork not connectedCloseThe transmission rate is 10Mbps
YellowNetwork connectedGreenThe transmission rate is 100Mbps
FlickerNetwork data is in useOrangeThe transmission rate is 1 Gbps

Figure 4.3: LAN Port Status Table.

4.3 Onboard Connectors & Headers

The motherboard features various onboard connectors and headers for system functionality:

  • Extended TMP Interface (Figure 4.4): For Trusted Platform Module connections.
  • USB 3.0 Ports (Figure 4.5): Internal headers for front panel USB 3.0 ports.
  • USB Expansion Port (Figure 4.6): Internal headers for additional USB connectivity.
  • F_PANEL1 Boot Port (Figure 4.7): Front panel connectors for power, reset, and LED indicators.
Top-down view of the HUANANZHI X11D-16D Motherboard
Figure 4.4: Motherboard overview showing various connectors.

Extended TMP Interface Pinout:

PinDescriptionPinDescription
1+3.3V2SPI_CS#
3RESET#4SPI_MISO
5SPI_CLK6GND
7SPI_MOSI8
9+3.3V Stdby10SPI_IRQ#

Figure 4.5: Extended TMP Interface Pinout.

USB 3.0 Ports Pinout:

PinDescriptionPinDescription
1Power2USB3_RX_DN
3USB3_RX_DP4Ground
5USB3_TX_C_DN6USB3_TX_C_DP
7Ground8USB2.0-
9USB2.0+10GND
11USB2.0+12USB2.0-
13Ground14USB3_TX_C_DP
15USB3_TX_C_DN16Ground
17USB3_RX_DP18USB3_RX_DN
19Power20N.C

Figure 4.6: USB 3.0 Ports Pinout.

USB Expansion Port Pinout:

PinDescriptionPinDescription
1VCC2VCC
3D-4D-
5D+6D+
7GND8GND
9KEY10N.C

Figure 4.7: USB Expansion Port Pinout.

F_PANEL1 Boot Port Pinout:

PinDescriptionPinDescription
1Power Button2Ground
3Reset Button4Ground
53.3V6Power Fail LED
7UID LED8OH/Fan Fail LED
93.3V Stby10NIC2 Active LED
113.3V Stby12NIC1 Active LED
133.3V Stby14HDD LED
153.3V16PWR LED
17X18X
19NMI20Ground

Figure 4.8: F_PANEL1 Boot Port Pinout.

5. Installation and Setup

5.1 CPU Installation

Follow these steps to install the CPU and heatsink module:

  1. Identify the CPU socket on the motherboard.
  2. Align the CPU with the socket, ensuring the triangle mark on the CPU matches the triangle on the CPU plastic clip.
  3. Gently place the CPU into the socket.
  4. Mount the Processor Heatsink Module onto the CPU socket. Ensure the large guide post and miniature guide post align with the corresponding holes.
  5. Tighten the screws on the heatsink in the sequence of 1, 2, 3, 4 (top 3 quarter view) to ensure even pressure.
HUANANZHI X11D-16D Motherboard with CPU and RAM installed
Figure 5.1: CPU and RAM installation overview.
HUANANZHI X11D-16D Motherboard with CPU and RAM installed, different angle
Figure 5.2: Another view of CPU and RAM installation.
HUANANZHI X11D-16D Motherboard with CPU and RAM installed, another angle
Figure 5.3: Close-up of CPU and RAM installation.

5.2 CPU Removal

To remove the CPU, reverse the installation process:

  1. Loosen the screws on the heatsink in the sequence of 4, 3, 2, 1.
  2. Carefully lift the Processor Heatsink Module off the CPU socket.
  3. Gently remove the CPU from the socket.

5.3 Memory (RAM) Installation

The motherboard supports up to 2TB DDR4 memory across 16 DIMM slots. Follow these steps:

  1. Open the latches at both ends of the memory slot.
  2. Determine the installation direction based on the projection position of the memory module.
  3. Align the memory module with the slot and press down firmly until the latches at both ends automatically spring up.
  4. Note: The black memory slots are main slots, and gray slots are secondary. Install memory into the primary slot first, then into adjacent secondary slots. A single slot cannot pass the memory self-test.
HUANANZHI X11D-16D Motherboard, CPU, and RAM kit
Figure 5.4: Motherboard with CPU and RAM components.

5.4 Video Card Installation

  1. Remove the baffle plate and screws from the main case using a screwdriver.
  2. When installing the video card, gently break the card tip of the card slot if necessary.
  3. Insert the video card into the video card slot.
  4. The card head will automatically return after installation.
  5. Use screws to secure the graphics card to the chassis.
  6. Install the power cable to the video card.

5.5 SATA Ports

The motherboard features 14 SATA3.0 ports. Note that 12 SATA nodes require a SAS SFF8087 to SATA adapter cable and support RAID 0, 1, 5, and 10.

Dimensions of the HUANANZHI X11D-16D Motherboard and I/O interface
Figure 5.5: Motherboard dimensions and SATA port locations.

6. Drivers Installation

Proper driver installation is crucial for the motherboard's functionality. The following drivers are typically required:

6.1 Driver Directory List

Driver DirectoryDriver SpecificationApplicable Operating System
X11D-16D Chipset DriverIntel chip information installationWin7/Win10
X11D-16D LAN DriverIntel Gigabit NICsWin7/Win10

6.2 Intel Chip Information Driver Installation

  1. Run: Control Panel > System > Hardware > Device Manager.
  2. Right-click on the device requiring the driver update and select "Properties".
  3. Go to the "Driver" tab and click "Update Driver".
  4. Select "Browse my computer for driver software" and then "Let me pick from a list of available drivers on my computer".
  5. Click "Have Disk..." and navigate to the corresponding driver directory.
  6. Follow the on-screen prompts to complete the installation.

6.3 External Graphics Card Driver Installation

  1. Run the external graphics card driver setup file (e.g., Setup.exe) from its directory.
  2. Click "Next" to continue.
  3. Accept the license agreement by clicking "Yes".
  4. Click "Next" to continue the installation.
  5. Click "Next" again to proceed.
  6. Click "Finish". The system will automatically detect the device and complete the installation.

6.4 NIC Driver Installation

  1. Run the NIC driver setup file (e.g., DRIVER: X11D-16D LAN driver/setup.exe).
  2. Click "Next" to continue.
  3. Select "Install" to begin the installation.
  4. Click "Finish". Restart the computer. The system will automatically find the device and complete the installation.

7. BIOS Settings

The CMOS SETUP stores critical data for the computer's proper function. This data is retained by a battery on the motherboard when power is off. To access the BIOS setup:

  1. Power on the computer.
  2. During the Power-On Self-Test (POST), press the Delete key to enter the AMI BIOS CMOS SETUP main screen.
  3. Alternatively, press F11 for the hot boot menu.

7.1 Main Course Menu Function

The BIOS menu is organized into several sections:

  • Main: General system information.
  • Advanced: Advanced settings for CPU, chipset, and other components.
  • Platform Configuration: Settings related to the platform.
  • Socket Configuration: Advanced CPU functions.
  • Server Management: Server-specific management options.
  • Security: Security settings.
  • Boot: Boot device priority and other boot-related options.
  • Save & Exit: Save changes, discard changes, or exit without saving.

If a menu item has a triangle indicator to its left, it indicates a submenu that will pop up when selected.

8. Troubleshooting

This section provides guidance for common issues you might encounter.

  • No Power/No Boot:
    • Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected.
    • Verify the power supply is sufficient (at least 500W recommended).
    • Check that the CPU and RAM are correctly installed and seated.
    • Confirm front panel connectors (Power Button, Reset Button) are correctly wired.
  • No Display:
    • Ensure the monitor is connected to the correct video output (VGA or discrete graphics card).
    • Verify the graphics card is properly seated in its PCIe slot and has adequate power.
    • Test with a single RAM stick in the primary slot.
  • System Instability/Crashes:
    • Check CPU and RAM compatibility. Incompatible components (e.g., ES/QS CPUs, certain RAM/M.2 SSDs) can cause issues. Consult customer service if unsure.
    • Ensure adequate cooling for CPU and chipset.
    • Update BIOS to the latest version.
  • Peripheral Not Detected:
    • Verify the device is properly connected.
    • Install the correct drivers for the device and motherboard chipset.
    • Check BIOS settings to ensure the port/interface is enabled.
  • IPMI Issues:
    • If IPMI is not connected to a network cable, wait 2 minutes or press Shift + Esc to skip the check.
    • Ensure the IPMI management network port is connected to a network.
    • Access IPMI login via browser using the IP address (e.g., https://xxx.xxx.xxx.xx). Default credentials: User: admin, Password: admin.
  • Digital Diagnostic Card: The motherboard includes a digital diagnostic card (Figure 4.1) which displays error codes during boot-up. Refer to the motherboard's technical documentation or online resources for specific code meanings to diagnose issues.

9. User Tips

  • Power Supply: This platform requires a powerful power supply. Ensure your power supply is at least 500W to support stable operation.
  • CPU Compatibility: Be aware that some small brand, bad quality, or ES/QS (engineering sample/qualification sample) versions of CPUs, RAM, or M.2 SSDs may be incompatible with the motherboard. It is highly recommended to confirm compatibility with customer service before purchasing such components. If incompatibility occurs without prior confirmation, refunds may not be accepted.
  • Memory Configuration: Always populate the black (primary) memory slots first, then the gray (secondary) slots. A single memory stick will not pass the self-test if not installed in a primary slot.
  • IPMI Access: If you encounter issues with IPMI network connectivity during boot, you can press Shift + Esc to bypass the check and proceed with booting.

10. Specifications

AttributeValue
Brand NameSZJN (HUANANZHI)
ModelX11D-16D DUAL
CPU SocketLGA3647 (Onboard CPU)
Processor CompatibilityIntel Xeon (1st and 2nd Gen)
Chipset ManufacturerIntel
ChipsetIntel Others (C621/C622)
Memory Slots16
Support Memory TypeDDR4 ECC (2933/2666/2400/2133MHz)
Memory ChannelFour (Hex-channel for single CPU)
Maximum RAM Capacity2TB (512GB listed in product properties, 2TB in description)
Storage Interface TypeSATA 3, M.2 (NVMe)
Number of SATA Ports14 (2 listed in product properties)
Number of M.22 (M.2 2280 NVMe PCIe X4 3.0, M.2 22110 NVMe PCIe X4 3.0)
RAID SupportedYes (RAID 0/1/5/10 via SAS SFF8087 for 12 SATA nodes)
PCI - E StandardsPCI-E 3.0
Number of PCIe x164
Number of PCIe x82
Number of PCIe x40
Number of PCIe x10
PortsUSB 3.0, USB 2.0, 2x RJ45, VGA, COM, IPMI Management Network
Max LAN Speed1000Mbps (2x Intel I210-V Gigabit Port)
Audio Channels5.1
Onboard Connectors & Header24-pin Main Power Connector, CPU Fan Connector(s)
Form FactorE-ATX (325*330MM)
Usage ScenarioGaming, Audio & Video, Office, Workstation, Server
OriginMainland China

11. Warranty and Support

Your HUANANZHI X11D-16D Motherboard comes with a warranty card included in the package. Please retain this card for future reference.

  • Quality Assurance: Our engineers conduct full-load operation tests on each motherboard to ensure the highest quality before shipment.
  • Technical Support: For any installation or technical assistance, please contact our after-sales customer service or reach us via email at business@huananzhi.com.
Engineers performing quality control tests on motherboards
Figure 11.1: Quality control testing in progress.
HUANANZHI brand introduction, manufacturing experience, and various certifications
Figure 11.2: HUANANZHI Brand Introduction and Certifications.

12. Additional Resources

12.1 Product Overview Video

Video 12.1: A product overview video showcasing the HUANANZHI X11D-16D motherboard, highlighting its features like CPU sockets, PCIe slots, SATA ports, diagnostic card, I/O panel, memory slots, and M.2 NVMe slots.

12.2 User Manual (PDF)

A comprehensive user manual in PDF format is available for download. This document provides further detailed information and diagrams.

You can view the PDF manual here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.