1. Introduction
Thank you for purchasing the Xiaomi 8000mAh USB Hanging Neck Fan. This portable bladeless fan is designed to provide a comfortable and efficient cooling experience with its innovative features and ergonomic design. Please read this manual carefully before using the product to ensure safe operation, optimal performance, and to extend the lifespan of your device.
2. Safety & Warnings
Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Package Contents
Please check the package contents upon unboxing. If any items are missing or damaged, please contact customer support.
- Xiaomi 8000mAh USB Hanging Neck Fan
- USB Charging Cable
- User Manual (this document)
4. Product Overview
Familiarize yourself with the components and key features of your neck fan.

Figure 1: Main view of the Xiaomi 8000mAh USB Hanging Neck Fan, showcasing its sleek design and cooling effect.
Key Features:
- 100-Speed Infinite Gear Wind Speed Regulation: Customize your cooling experience with up to 100 levels of wind output.
- Intelligent Digital Display: Easily check battery level and current wind speed at any time.
- Dual Axis Free Adjustment: The fan is adjustable in size and angle, with 45° stretchable points on each side, to comfortably fit various neck circumferences.
- 8-Core Turbocharged Ice Engine: Utilizes compressed cold flow technology to significantly increase airflow and provide a powerful cooling sensation.
- 8000mAh Battery: Provides up to 9 hours of continuous operation on a single charge, controlled by an advanced EcU chip.
- Bladeless Design: Ensures safety and prevents hair entanglement.

Figure 2: Digital display showing battery level and wind speed, with a scroll wheel for precise adjustment.

Figure 3: The fan's flexible design allows for 45° stretchable adjustment on both sides for a comfortable fit.

Figure 4: Diagram illustrating the 8-core turbocharged ice engine, which inhales hot air and blows out cold air for 300% improved cooling.

Figure 5: Rose Gold variant highlighting the 8000mAh battery, 9-hour endurance, intelligent digital display, and arbitrary angle adjustment.
5. Setup
5.1 Before First Use
- Remove all protective films from the device.
5.2 Charging the Device
- Connect the provided USB Charging Cable to the charging port on the fan.
- Connect the other end of the USB cable to a certified 5V power adapter (not included), a computer USB port, or a power bank.
- Ensure the fan is fully charged before its first operation. The digital display will indicate the charging status and battery level.
6. Operating Instructions
6.1 Power On/Off
- To power on the fan, press and hold the power button (usually located near the digital display) for a few seconds until the display lights up.
- To power off the fan, press and hold the power button again until the display turns off.
6.2 Adjusting Wind Speed
- Once powered on, use the infinite roller adjustment (scroll wheel) to increase or decrease the wind speed.
- The digital display will show the current wind speed level (from 1 to 100).
6.3 Checking Battery Level
- The digital display will show the current battery percentage, allowing you to monitor power levels at any time.
6.4 Adjusting Fit
- Gently adjust the flexible arms of the fan to fit comfortably around your neck. The dual-axis design allows for 45° stretchable adjustments to suit various neck sizes.
7. Maintenance
7.1 After Use
- Turn off the device.
- Store it in a dry place, away from direct sunlight and extreme temperatures.
- Keep away from children.
7.2 Cleaning
- Ensure the fan is turned off and disconnected from any power source before cleaning.
- Wipe the exterior of the fan with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or immerse the device in water.
- Use a soft brush or compressed air to gently clean any dust from the air inlets and outlets.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | Battery is depleted Power button not pressed correctly | Charge the fan fully Press and hold the power button for a few seconds |
| Fan does not charge | Charging cable is faulty Power adapter is not working Charging port is damaged | Try a different USB cable Try a different 5V power adapter Contact customer support |
| Weak airflow | Low battery Air inlets/outlets are blocked Fan speed set too low | Charge the fan Clean air inlets/outlets Increase wind speed using the roller adjustment |
| Unusual noise during operation | Obstruction in the fan mechanism Device damage | Turn off the fan and check for any visible obstructions. If noise persists or device is damaged, discontinue use and contact support. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MIJIA (Xiaomi) |
| Power Source | USB |
| Battery Capacity | 8000mAh |
| Endurance | Up to 9 hours |
| Fan Speed | Fifth Gear (100-speed infinite regulation) |
| Power (W) | 5W |
| Voltage (V) | 5V |
| Max. Power | <20W |
| Type | Cooling Only |
| Wind Type | Natural Wind |
| Reverse Rotating Function | Yes |
| Timing Function | No Timing |
| Remote Control Function | No |
| Certification | CE |
| Product Dimensions (Approx.) | Length: 8cm, Width: 8cm, Height: 8cm |
| Product Weight (Approx.) | 0.35 kg |
10. User Tips
- For optimal cooling, ensure the fan's air outlets are not obstructed by clothing or hair.
- Charge the fan regularly, even if not in constant use, to maintain battery health.
- Experiment with different wind speeds to find your most comfortable setting for various activities and environments.
- When storing for extended periods, ensure the fan is fully charged and then stored in a cool, dry place.
11. Warranty & Support
For warranty claims, technical support, or any product-related inquiries, please contact the manufacturer or your point of purchase.
Manufacturer Information:
- Manufacturer: Wuneng (Shenzhen) Technology Co., Ltd.
- EU Authorized Representative: Y & HS.R.L., Via Gravina 21 MT matera, Trani, Puglia, MATERA, Italy. 75100 Van Lavazza
- Email: itlyhsrl@gmail.com
- Phone: +39 3917722149
- Importer: 502, 5th Floor, Building 1 South Oil Animation Park Yuehai Road Yuehai Subdistrict Nanshan District Shenzhen City Guangdong