MCHOSE A7 V2 Pro

Contents

MCHOSE A7 V2 Pro Wireless Gaming Mouse User Manual

Tri-Mode Connection, 59 Grams, PAW3395 26K DPI Sensor, Wired 8K/Wireless 1K Polling

1. Product Overview

The MCHOSE A7 V2 Pro is a high-performance wireless gaming mouse designed for precision and speed. It features tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth 5.0), a lightweight 59-gram design, and a PAW3395 sensor capable of up to 26,000 DPI. This manual provides instructions for setup, operation, and maintenance.

Top and side view of the white MCHOSE A7 V2 Pro mouse
Figure 1: MCHOSE A7 V2 Pro Mouse (White, Top and Side View)

Mouse Components:

  • Buttons: Left/Right Button, Scroll Wheel, Forward/Backward Buttons, DPI Switch Button
  • Ports: Type-C (for charging & wired connection)
  • Indicators: DPI Indicator, 2.4G Indicator, Bluetooth Indicator, Battery Indicator
  • Switch: Power ON/OFF, Mode Switch (2.4G/Bluetooth/Wired)
  • Receiver: 2.4G wireless receiver (stored inside the mouse)

2. Connection Instructions

2.1 Wired Mode

  1. Connect the Type-C end of the included cable to the mouse.
  2. Plug the USB end into a computer USB 2.0/3.0 port.
  3. The mouse works immediately and charges at the same time.

2.2 2.4G Wireless Mode

  1. Toggle the bottom switch to 2.4G and turn on the power.
  2. Take out the 2.4G receiver and plug it into a computer USB port.
  3. The indicator flashes then turns off when connected successfully.

Re-pairing: Long press the Mode Switch Button until the indicator flashes fast; plug in the receiver and keep the mouse within 20cm.

2.3 Bluetooth Mode

  1. Toggle the switch to Bluetooth and turn on the power.
  2. Short press the Mode Switch to select Bluetooth 1/2.
  3. Long press the Mode Switch for 5 seconds until the blue light flashes fast (pairing mode).
  4. On your device, search for "MCHOSE XXX" (e.g., MCHOSE G7) and connect.

3. DPI Adjustment

Press the DPI Switch Button to cycle through 6 predefined DPI levels:

  • 800 (Red)
  • 1600 (Green)
  • 2400 (Blue)
  • 3200 (Cyan)
  • 5000 (Yellow)
  • 12000 (Purple)

You can customize DPI settings via the M HUB driver, supporting up to 20,000 DPI.

Diagram showing sensor specifications: 26,000 DPI, 50G Acceleration, 650 IPS, and 8K Hz Polling Rate
Figure 2: Key Sensor Specifications

4. Battery & Charging

  • Low battery: Red indicator flashes. Please charge.
  • Charging: Red light solid.
  • Fully charged: Green light solid.

Charging Tips:

  • Use only computer USB ports or certified 5V/1A adapters.
  • Do not use high-voltage/poor-quality adapters.
  • Turn off the power if the mouse is unused for a long time.
White MCHOSE A7 V2 Pro mouse on a charging dock with RGB lighting
Figure 3: Mouse on Charging Dock

5. Driver Software (M HUB)

The M HUB driver software allows for advanced customization of your mouse, including DPI, RGB lighting, button macros, and firmware updates.

5.1 Web Driver

5.2 Client Driver

  • Supports Windows 10+ (macOS not supported).
  • Download: www.maicong.cn → Drivers → Download & install M HUB Client.

6. Specifications

Feature Detail
Brand Name MCHOSE
Type 2.4Ghz Wireless
Connection Wired + 2.4G + Bluetooth 5.0
Sensor High-precision optical sensor (PAW3395)
DPI 800-12000 (default), up to 20000 (driver)
Polling Rate 125/250/500/1000 Hz (Wireless), 8000 Hz (Wired)
Acceleration 50 G
IPS 650
Battery Built-in rechargeable lithium battery
Power Type Rechargeable
Interface Type USB
Hand Orientation Right
Style Finger
Number of Rollers 1 pcs
Dimensions Ergonomic lightweight design
System Support Windows/macOS/Linux/Android/iOS
Certification CE
Graph comparing average response time: 1000Hz at 1.0ms and 8000Hz at 0.125ms
Figure 4: Response Time Comparison (Polling Rate)

7. Troubleshooting

Connection Fails:

  • Check power & switch mode.
  • Re-pair 2.4G/Bluetooth.
  • Move the mouse closer to the receiver/device.

Unstable Cursor:

  • Use on a smooth mouse pad (avoid glossy surfaces).
  • Reduce DPI or polling rate via the driver.

Not Charging:

  • Check the cable and USB port.
  • Restart the mouse or computer.

8. Safety & Compliance

  • This device complies with FCC Part 15 and CE regulations.
  • Operation is subject to two conditions:
    1. This device may not cause harmful interference.
    2. This device must accept any interference received.
  • Do not disassemble or modify the mouse (voids warranty).
  • Keep away from water, moisture, and high temperatures.

9. User Tips

To ensure optimal performance and longevity of your MCHOSE A7 V2 Pro mouse:

  • Regularly clean the mouse sensor and feet to maintain tracking accuracy.
  • Keep the M HUB driver updated for the latest features and performance enhancements.
  • For competitive gaming, consider using the wired 8K Hz polling rate for the lowest latency.

10. Warranty and Support

For warranty information and technical support, please refer to the official MCHOSE website or contact your retailer. Keep your proof of purchase for any warranty claims.

A detailed user manual in PDF format is available for download: MCHOSE General Mouse User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.