Introduction
Thank you for choosing the Leeocar Android Touch Screen Car Radio. This multimedia player head unit is designed to enhance your driving experience with advanced features like Wireless/Wired CarPlay, Android Auto, GPS Navigation, Bluetooth connectivity, and a high-definition touch screen. This manual provides detailed instructions for installation, operation, troubleshooting, and specifications to help you get the most out of your new car stereo.


What's Included in the Package
Please verify all items are present upon unboxing. If any accessories are missing, contact customer service.
- 1 x Car MP5 Player (Head Unit)
- 1 x Power Cable
- 1 x GPS Antenna
- 1 x Camera
- 1 x Canbus box
- 1 x Rear Camera Input Cable
- 1 x RCA Cable
- 2 x USB Cable
- 1 x Crowbar
- 1 x Instruction Manual
- 1 x Microphone
Setup & Installation
Important Safety Note: Always disconnect the car battery before beginning installation. Do not connect wiring while power is on, as this may result in system errors, fuse damage, or permanent malfunction.

1. Radio Wiring Diagram
Refer to the provided wiring diagram for connecting the main power harness, USB cables, microphone, and other accessories. Ensure all connections are secure.
2. Radio Rear Panel Pinout Diagram
This diagram illustrates the pin assignments on the rear panel of the head unit. Use this for reference when connecting various cables.
3. Wiring Harness Connection Tutorial
Connect the labeled factory plugs. The remaining plugs do not need to be connected. For additional camera installation, connect to the camera's RCA male port. If you are not retaining the factory camera, ignore the 10-Pin Reversing Cable connection.
4. Dashboard Trim Installation
Install the dashboard trim as shown in the image and secure it with screws. Ensure proper fitment to avoid issues.

5. Rear Camera Wiring Tutorial
Connect the camera's power and video cables according to the diagram. The wire colors may vary between batches, but the pin locations will remain the same.
6. Initial Power-On Check
If the new radio does not power on or the factory display is not working after installation, ensure that Switches 1 and 2 on the provided circuit board are both flipped up to the "ON" position. Refer to the diagram on the installation guide. Before adjusting any switches, ensure the board is completely powered off to prevent damage.
Operation
1. Touch Screen Interface
The unit features a 10.1-inch 2.5D capacitive touch screen with a 1280*800 resolution, providing high-definition visuals and responsive touch control. The user interface is designed for easy operation in a car environment.

2. Wireless & Wired CarPlay / Android Auto
This unit supports both wireless and wired CarPlay for iOS devices and Android Auto for Android phones. These features integrate your smartphone's functions (navigation, calls, messages, music) directly into the car's display.

Connecting to Wireless CarPlay (or Android Auto) using Carlink 2.0:
- Turn on Bluetooth on the radio and connect it to your phone's Bluetooth. The default pairing code is 0000.
- For Android users: Ensure your phone supports Android Auto and the app is installed from the Play Store.
- Open the Carlink 2.0 app on the radio to activate CarPlay or Android Auto.
- On your phone, go to Bluetooth settings, tap the connected radio device, select Device Type, and set it to Car Stereo.
- If prompted, tap "Turn on Wi-Fi & Use CarPlay" to complete the wireless setup.
3. Mirror Link
Mirror Link allows you to display your smartphone's screen (main menu, photos/videos, online navigation) on the head unit. For iPhones, use AirPin(PRO) Apps via WiFi hotspot. For Android phones, use Easy Connect Apps and a USB charging cable.

4. GPS Navigation
The unit has built-in GPS navigation. You can use Google Maps with a WiFi connection or purchase offline navigation apps from the Play Store. The system provides precise positioning to guide you to your destination.

5. Bluetooth 4.0
Connect your smartphone via Bluetooth 4.0 for hands-free calling, music playback, and automatic loading of your phonebook. The default Bluetooth keyword is 0000.

6. FM/RDS Radio & Audio Settings
Enjoy FM radio with 18 preset stations. The unit supports RDS (Radio Data System). Customize your audio experience with the built-in 15-band EQ and subwoofer controls. The 36EQ DSP sound allows for fine audio adjustments.


7. Steering Wheel Control
The unit supports steering wheel controls, allowing you to adjust music, calls, and navigation without taking your hands off the wheel. This enhances convenience and reduces distractions.
Steering Wheel Controls Setup Tutorial:
Go to Settings > Protocol Settings > Car Model, and select "XBS--Honda--Accord 9--2.0LOW". Follow the on-screen instructions to map your steering wheel buttons.

8. Backup Camera
The car stereo supports AHD high-definition 1080P camera image input. When you shift into reverse, the unit automatically displays the rearview mirror view, often with obstacle warnings.

9. Other Features
- File Manager: Support downloading, installing, and deleting thousands of Android apps.
- Multi-language Support: Supports up to 40 national languages including English, Arabic, Russian, Hebrew, Spanish, Italian, French, Thai, German, Japanese, Korean, Turkish, Czech, Hungarian, Dutch, Polish, Swedish, Ukrainian, Romanian, Greek, Danish, Finnish.
- Time Setting: Use the network or GPS to automatically set the date and time, or adjust it manually.
- External Microphone: The unit supports an external microphone for improved call quality.
Maintenance
- Screen Cleaning: Use a soft, lint-free cloth to clean the touch screen. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
- Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can typically be found on the manufacturer's website or through the unit's system settings.
- Temperature Control: Avoid exposing the unit to extreme temperatures for prolonged periods.
- Cable Connections: Periodically check all cable connections to ensure they are secure and free from damage.
Troubleshooting (FAQs)
- Q1: What is the factory password?
- A: To access the Factory Settings, please enter "3368" when prompted.
- Q2: The rear camera image is reversed (left to right). How can I fix it?
- A: Go to Settings > General and toggle the "Mirror view on reverse image" option to adjust.
- Q3: Why is the factory backup camera image unclear?
- A: Factory rear cameras often use CVBS (360P) signals, while this radio supports AHD (1080P). For better image quality, use the supplied AHD camera.
- Q4: How do I turn off the camera's guideline?
- A: Go to Settings > Factory (enter "3368") > Original Car Agreement and turn off "Reverse Parking Line."
- Q5: What should I do if the radio experiences issues like freezing and stuttering?
- A: Go to Settings > User > Backup and Reset (enter "3368") and tap Erase All Data (Factory Reset). You can also perform a hard reset by using a pin-like tool to press the RST hole on the front panel of the radio for 5-10 seconds.
- Q6: Is it possible to support Sirius XM radio?
- A: The radio does not have a port for connecting a SiriusXM tuner. You may check the Play Store for an online SiriusXM Radio app, but compatibility with third-party apps is not guaranteed.
- Q7: Does it support the factory microphone?
- A: The factory microphone cannot be retained. Connect the external microphone to the 3.5mm port on the RCA cable. Install the microphone on the driver's side sun visor, with the head facing the driver's face.
- Q8: Can I use a voice assistant (Siri, etc.)?
- A: The voice assistant can only be activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay, then use the voice assistant feature on your phone.
- Q9: Why is the time not accurate?
- A: Ensure your GPS antenna is properly connected (on the A-pillar or outside the dash). Connect to Wi-Fi or a hotspot, then go to Settings > System > Date and Time, and enable "Use network-provided time" and "Use network-provided time zone."
- Q10: Why is the WiFi connection unstable?
- A: Verify that the single yellow RCA camera port is properly connected to the radio, as adjacent small wires are for Wi-Fi and Bluetooth signals. Bluetooth and Wi-Fi cannot be used at the same time.
- Q11: How do I change the custom boot logo/startup logo?
- A: Go to Settings > Factory (enter "3368") > Boot Screen Logo. To save different logo images, create a folder named 'mycar' in the root directory of your USB drive. Download the desired image (1280x800 resolution, .bmp format), then connect the USB drive to the radio. The image will be available for selection.
- Q12: How do I remove the factory radio and install a new one?
- A: Refer to the detailed diagrams and video tutorials provided in the installation guide section of this manual or contact technical support.
- Q13: Why doesn't the new radio power on after installation, or why is the factory display not working?
- A: Make sure that Switches 1 and 2 on the provided circuit board are both flipped up to the "ON" position. Ensure the board is completely powered off before adjusting switches.
Specifications
| Feature | Specification |
|---|---|
| System | Android 13 |
| Screen Size | 10.1 inches |
| Screen Resolution | 1280*800 |
| RAM | 4GB (2GB option available) |
| ROM | 64GB (32GB option available) |
| CPU | 4 cores |
| Bluetooth Version | 4.0 |
| Power Output | 4*45W |
| Voltage | DC 12V |
| Operating Temperature | -20℃ to 70℃ |
| CarPlay | Wireless/Wired Connection Support |
| Android Auto | Wireless/Wired Connection Support |
| WiFi | Support |
| GPS | Built-in offline maps (requires internet to download data) |
| Steering Wheel Control | Support |
| Backup Camera Input | AHD/CVBS Support |
| Video Output | Support |
| USB Interface | Double USB |
| Radio Band | FM/RDS |
| Audio Format Support | APE/FLAC/WAV/MP3/WMA etc. |
| Video Format Support | MKV/RMVB/AVI/MP4/MDV etc. |
| Picture Format Support | PNG/JPEG/JPG/GIF/WBMP/BNP etc. |
| Bluetooth Keyword | 0000 |
| Factory Setting Keyword | 3368 |
| Item Weight | 2.5kg |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
User Tips
- For optimal GPS performance, ensure the GPS antenna is installed in a location with a clear view of the sky, such as on the dashboard or A-pillar.
- If experiencing any lag or unresponsiveness, a quick factory reset (as described in Q5 of Troubleshooting) can often resolve the issue.
- When using Mirror Link or CarPlay/Android Auto, ensure your phone's software is up-to-date for the best compatibility and performance.
- Consider using the external microphone for clearer hands-free calls, especially in noisy environments.
Warranty & Support
This product comes with a 1-year warranty.
How to Access Technical Support
For any issues not mentioned in this FAQ, or for further assistance, please feel free to contact our customer support team. We are here to help you find the best possible solution.
You can also scan the QR code below to visit our official website, where you can access after-sales support, or use the forum on our website to ask questions or report any issues.
- Real-time expert support
- Updates on system upgrades
- Tips & tricks shared by fellow users