1. Product Overview
This HXCONTROLLER MPPT Solar Charge Controller is a smart Maximum Power Point Tracking (MPPT) device specifically designed for off-grid solar systems. It efficiently maximizes solar energy harvest, even on cloudy days, by dynamically tracking the sun's output. The controller supports multiple battery types, offers real-time monitoring, and allows for remote control via a mobile application using its built-in Wi-Fi (ESP32 RainMaker).
It is engineered with premium components and robust cooling to operate effectively in extreme temperatures (-35°C to +60°C) and includes comprehensive system protection features. This controller is ideal for off-grid cabins, RVs & marine applications, home backup systems, and remote telecom installations.
Figure 1: HXCONTROLLER MPPT Solar Charge Controller
Figure 2: HXCONTROLLER MPPT Solar Charge Controllers in different capacities
2. Key Features
- Advanced MPPT Algorithm: Maximizes solar energy harvesting with up to 98% tracking efficiency and 99% peak conversion efficiency.
- Comprehensive Protection: Includes over-voltage, over-current, and temperature protection for PV arrays and batteries (overcharge, reverse polarity, undervoltage).
- Smart Battery Management: Supports multiple battery types (Lead-acid, LiFePO4, NCM, Gel, User-defined) with multi-stage charging to prolong battery lifespan.
- Built-in Wi-Fi: Enables real-time monitoring and remote control via the "ESP RainMaker" mobile app (iOS and Android compatible).
- Colorful LCD Display: Provides clear visual feedback on power generation, PV voltage, battery voltage, charging current, operating status, and historical data.
- User-Friendly Interface: Easy navigation through menus using a 4-key interface (MENU, UP, DOWN, BACK).
- Cumulative Energy Logging: Tracks and displays total energy generated.
Figure 3: High Tracking and Conversion Efficiency
3. Safety Guidelines
To ensure safe operation and proper heat dissipation, observe the following minimum safety clearances around the controller:
- Left/Right: 20 cm
- Above: 30 cm
- Below: 30 cm
Ensure no other equipment or objects obstruct these areas.
Figure 4: Recommended Safety Clearances for Installation
4. Setup and Installation
4.1. Quick Start Wiring Guide
To avoid damage, follow this recommended wiring order:
- Connect DC loads to the Load output terminals (optional).
- Connect batteries to the Battery terminals.
- Connect solar panels to the PV input terminals.
- Ensure correct polarity for all connections.
Important: This prevents inrush current from tripping protection or damaging terminals.
4.2. Wiring Diagram
The following diagram illustrates a typical wiring setup for the solar charge controller within an off-grid system.
Figure 5: System Wiring Diagram
The correct wiring sequence for the solar charge controller is as follows:
- Go to Menu > DC Output Setup and turn off DC output.
- Confirm on the main screen that the DC output icon is OFF.
- Connect the load.
- Return to Menu > DC Output Setup and turn on DC output.
Figure 6: Wiring Terminals
Figure 7: Connecting Multiple Solar Panels in Series (Max 250V VOC Input)
4.3. Wi-Fi Setup
The controller features built-in Wi-Fi for remote monitoring and control via the ESP RainMaker app.
- After power-on, the ESP32 module in the controller will broadcast via Bluetooth Low Energy (BLE) for 30 minutes.
- On your smartphone, open the ESP RainMaker app (available on App Store and Google Play). Log in or create an account.
- Tap "Add Device" -> "Choose No QR Code" -> Select BLE as the provisioning method.
- Look for a device starting with "PROV_" and tap it.
- Enter the password: 88888888, then follow the prompts in the app to complete the Wi-Fi setup.
- If no "PROV_" device is found, BLE may have timed out. Go to Menu > Reset Wi-Fi on the controller to re-enable BLE broadcasting.
Figure 8: ESP RainMaker App Interface for Monitoring
5. Operation
5.1. Initial Power-up and Navigation
Once the battery is connected, the system powers on automatically. The LCD will display the system status. By default, the controller runs in Auto mode and attempts to recognize the battery voltage automatically.
Use the 4-key interface (MENU, UP, DOWN, BACK) to navigate menus. Long press MENU to enter the main menu. Navigate using UP/DOWN, confirm with MENU, and exit with BACK.
Figure 9: LCD Display - PV Monitor Screen
The LCD display provides the following information:
- Time (Configurable according to local time)
- Internal Temperature
- Automatic Voltage Recognition Range
- Max Charging Current (Subject to the model-specific standards)
- PV Connection Status
- PV Voltage
- PV Charging Current
- Cumulative Power Generation
- Battery Voltage
- Battery Charging Current
- Battery Charging Power
- DC Output Status
5.2. MPPT Charging Mode
The controller utilizes a 4-stage charging process to optimize battery health and longevity:
- Bulk Charge: Rapid charging phase.
- Boost Charge: Increases voltage to ensure full charge.
- Float Charge: Maintains battery at full charge.
- Equalization Charge: Periodically overcharges to balance battery cells (for certain battery types).
Figure 10: MPPT 4-Stage Charging Mode
5.3. Menu Functions
From the main menu, you can configure various settings:
Figure 11: Controller Menu Options
- Battery Type: Select battery chemistry (Lead-acid, LiFePO4, NCM, Auto, User-defined).
- Max Charge Current: Set the maximum charging current limit.
- DC Output Setup: Configure DC load output.
- Auto Mode: Output ON when Battery Voltage > Undervoltage Protection Value.
- PV Voltage Threshold: Turn on/off based on PV voltage threshold.
- By Time: Schedule on/off times.
- Time Adjust: Set Real-Time Clock (RTC) time.
- Language: Select display language (English/Portuguese).
- Reset Wi-Fi: Re-enable ESP32 BLE to change or re-pair Wi-Fi credentials (useful after changing router or moving to a new location).
Warning: The battery charging parameters must match those of the controller. Failure to do so will pose a serious risk of malfunction. Contact customer service if you are unsure about the configuration.
5.4. App Monitoring
The ESP RainMaker app allows you to monitor real-time data from your controller:
- PV voltage and current
- Battery voltage and charging current
- Charging power and cumulative energy
- Temperature and system status
6. Maintenance
- Installation and maintenance should only be performed by qualified personnel.
- Do not exceed the rated voltage or current of the device.
- Keep the controller in a dry and well-ventilated area.
- Always disconnect power before performing any maintenance.
7. Troubleshooting
| Problem | Solution |
|---|---|
| No display | Check battery connection and fuse. |
| PV LED off | Check solar panel wiring and ensure there is sufficient daylight. |
| Battery not charging | Check battery type settings and voltage configuration. |
| Wi-Fi not connecting | Reset Wi-Fi on the controller and retry BLE pairing via the app. |
| Alarm LED ON | Indicates a communication error or fault. Check connections and system status. |
8. Specifications
| Parameter | HX40A | HX60A | HX80A |
|---|---|---|---|
| MPPT Maximum Charging Current | 40A | 60A | 80A |
| Adjustable PV Charging Current | 0-40A | 0-60A | 0-80A |
| PV Max Open-Circuit Input Voltage | 250V | ||
| Battery Voltage | 12/24/36/48/60/72/84/96/108/120V | ||
| Battery Type | Ternary lithium, lithium iron phosphate, lead-acid, gel, and User-defined batteries | ||
| PV Min Operating Input Voltage | Must be over 5V higher than the battery pack voltage | ||
| Charging Mode | MPPT Automatic Maximum Power Point Tracking | ||
| PV Minimum Startup Voltage | PV voltage is 5V higher than battery voltage (enables low-current charging even on rainy or cloudy days) | ||
| Output Voltage | Follows Battery Pack Voltage | ||
| DC Output Configuration | Off, Auto | ||
| Wi-Fi IoT Function | Built-in Wi-Fi + APP Remote Monitoring | ||
| Operating Ambient Temperature | -25°C - 46°C | ||
| Standby Power Consumption | 3W | ||
| Overall Efficiency | 99% | ||
| Temperature Protection | 90°C | ||
| Temperature Rise Protection | Reduces Power Output When Temperature Exceeds 80°C | ||
| Protection Functions | PV Array Protection: Short Circuit, Overvoltage, Overcurrent, Reverse Polarity; Battery Protection: Overcharge, Reverse Polarity, Undervoltage | ||
| Humidity | 0-90%RH (Non-Condensing) | ||
| Equipment Protection Rating | IP22 | ||
| Altitude | 0-3000m | ||
Figure 12: Technical Parameter Table
Regarding PV Panel Input Voltage:
- Minimum Input: Must be 20V higher than the battery's maximum voltage.
- Maximum Input: 250V.
9. User Tips
- The colorful screen is clear and easy to read, enhancing monitoring convenience.
- The built-in WiFi monitoring works effectively, allowing for remote system checks.
- The blue casing design is noted for its simple and elegant appearance.
- For complex solar system issues, the seller has been reported to provide professional support.
- Ensure to follow the instructions carefully, especially for Wi-Fi setup, as clarity can sometimes be improved.
10. Warranty and Support
To ensure superior quality, all MPPT solar controllers undergo rigorous inspections before leaving the factory. HXCONTROLLER provides a one-year free warranty service from the date of purchase, ensuring the controllers are in good working condition with complete components.
10.1. Warranty Terms
Within one year from the date of purchase, if the controller malfunctions or sustains component damage under normal operation, our technical personnel will conduct an inspection. Upon confirmation of eligible faults, we will provide free repair services and replacement of defective parts, with all faulty components retained by our company.
10.2. Conditions Voiding Warranty
The warranty for the controller will be automatically void under the following circumstances:
- Alteration of the company's trademark.
- Damage caused by improper operation, negligent use, or force majeure events.
- Unauthorized disassembly, repair, or modification by personnel other than our company's technical staff; or tampering with/removal of the controller's serial number or warranty seal.
- Installation not in accordance with the original manufacturer's installation instructions.
10.3. Requesting Warranty Service
Please keep your purchase receipt (invoice) and the warranty card properly. When requesting warranty service, you must present these documents for inspection by our technical staff.
A detailed user manual in PDF format is available for download: HXCONTROLLER MPPT Solar Charge Controller User Manual (PDF).