Introduction
Thank you for purchasing the BRZHIFI 300B A80 Dual Mono Amplifier. This high-fidelity audio amplifier is designed to deliver exceptional sound quality for audiophiles and home theater enthusiasts. Featuring a dual mono structure, independent power supplies for each channel, and Class A single-ended amplification, the A80 ensures superior channel separation and a rich, detailed soundstage. Its multi-level CLC filter circuit contributes to a quieter background and enhanced detail. Please read this manual carefully before operating your amplifier to ensure proper setup, safe use, and optimal performance.
Important Safety Instructions
- Read these instructions thoroughly before use.
- Keep these instructions for future reference.
- Heed all warnings provided on the product and in this manual.
- Follow all operating and usage instructions.
- Do not use this apparatus near water or in damp environments.
- Clean only with a dry cloth. Avoid liquid cleaners.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions, ensuring adequate airflow around the unit.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including other amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Package Contents
Upon unpacking, please ensure all items listed below are present and in good condition:
- BRZHIFI 300B A80 Dual Mono Amplifier units (2 units)
- 300B Vacuum Tubes (2 per unit, total 4)
- 5U4 Vacuum Tubes (1 per unit, total 2)
- 6SN7 Vacuum Tubes (2 per unit, total 4)
- Power Cords (2)
- User Manual (this document)
If any items are missing or damaged, please contact your dealer immediately.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | BRZHIFI |
| Model | PAT-A80 |
| Type | Home Tube Amplifier |
| Channels | 2 (2.0) |
| Material | Aluminum Alloy |
| Color | Silver/Black |
| Input Sensitivity | 500mV-2000mV |
| Input Impedance | 100KΩ |
| Frequency Response | 20HZ-30KHZ |
| Signal to Noise Ratio | 98dB |
| Tubes Used | 300B (power), 5U4 (rectifier), 6SN7 (pre-amp) |
| Dimensions (per unit) | 102mm (W) × 335mm (D) × 352mm (H) |
| Weight (including packaging) | 24kg (for the pair) |
Setup Guide
1. Unpacking and Placement
- Carefully remove the amplifier units from their packaging.
- Place each amplifier unit on a stable, level surface with adequate ventilation. Ensure there is enough space around the units for heat dissipation, especially around the vacuum tubes.
- Keep the amplifiers away from direct sunlight, heat sources, and moisture.
2. Tube Installation
The vacuum tubes may be shipped separately or pre-installed. If they are separate, follow these steps:
- Identify the tube types: 300B (large power tubes), 5U4 (rectifier tube, usually central), and 6SN7 (pre-amplifier tubes, smaller).
- Carefully align the pins of each tube with the corresponding sockets on the amplifier chassis. The sockets are usually keyed to prevent incorrect insertion.
- Gently push each tube straight down into its socket until it is firmly seated. Do not force the tubes.
- Repeat for all tubes on both amplifier units.

Image: Front-top view of the BRZHIFI 300B A80 Dual Mono Amplifiers with vacuum tubes installed.

Image: Rear view of the BRZHIFI 300B A80 Dual Mono Amplifiers, showing input and output terminals.
3. Audio Connections
Each mono amplifier unit handles one channel (left or right). You will need a pre-amplifier or source with volume control to drive these power amplifiers.
- Input (RCA): Connect the left channel output from your pre-amplifier or source to the RCA input terminal on one A80 unit. Connect the right channel output to the RCA input terminal on the other A80 unit. Ensure correct channel assignment.
- Speaker Output: Connect your left speaker to the speaker output terminals (red for positive, black for negative) on the left channel A80 unit. Connect your right speaker to the speaker output terminals on the right channel A80 unit. Ensure correct polarity and secure connections.

Image: Close-up of the rear panel of one BRZHIFI 300B A80 amplifier, showing RCA input, speaker binding posts, and IEC power inlet with power switch.
4. Power Connection
- Ensure the power switches on both amplifier units are in the OFF position.
- Connect the supplied power cords to the IEC inlets on the rear of each amplifier unit.
- Plug the other end of the power cords into a suitable AC power outlet.
Operating Instructions
1. Powering On
- Before powering on, ensure your pre-amplifier or source volume is set to minimum.
- Flip the power switch on each A80 amplifier unit to the ON position.
- The vacuum tubes will begin to glow, indicating they are warming up. Allow a few minutes for the tubes to reach their optimal operating temperature (typically 30-60 seconds for initial sound, but full stability takes longer).
2. Playing Audio
- Start playing audio from your source.
- Slowly increase the volume on your pre-amplifier or source to your desired listening level.
- The front panel of each amplifier may feature a VU meter to indicate output levels.

Image: Front view of the BRZHIFI 300B A80 Dual Mono Amplifiers, showing VU meters and control knobs.
3. Powering Off
- Reduce the volume on your pre-amplifier or source to minimum.
- Flip the power switch on each A80 amplifier unit to the OFF position.
- The tubes will gradually cool down.
Maintenance
1. Cleaning
- Always disconnect the power cords before cleaning.
- Use a soft, dry cloth to wipe the chassis. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- For vacuum tubes, use a soft, lint-free cloth to gently wipe away dust when the tubes are cool. Avoid touching the glass with bare hands as oils can leave residue.
2. Tube Replacement
Vacuum tubes have a finite lifespan and will eventually need replacement. The lifespan varies depending on usage, but typically power tubes (300B) may last 2,000-5,000 hours, while pre-amp (6SN7) and rectifier (5U4) tubes can last longer.
- Signs of tube wear include reduced sound quality, increased noise, or visible signs of damage (e.g., milky white getter flash).
- When replacing tubes, ensure the amplifier is powered off and unplugged. Allow tubes to cool completely.
- Gently pull the old tube straight out of its socket.
- Insert the new tube, aligning the pins carefully, and push it firmly into the socket.
- It is recommended to replace tubes with matched sets, especially power tubes, for optimal performance.
3. Ventilation
- Ensure proper ventilation around the amplifier at all times to prevent overheating, which can shorten the lifespan of components, especially vacuum tubes.
- Do not place objects on top of the amplifier that could obstruct airflow.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/No lights | Power cord not connected; Power outlet faulty; Amplifier power switch off; Internal fuse blown. | Check power cord connections; Try a different outlet; Ensure power switch is ON; Contact service if fuse is suspected. |
| No sound | Input cables loose/incorrect; Speaker cables loose/incorrect; Source not playing; Pre-amp volume too low; Faulty tube. | Check all audio connections; Verify source is playing; Increase pre-amp volume; Check tubes for proper seating or signs of failure. |
| Distorted sound | Input signal too strong; Speaker impedance mismatch; Faulty tube; Damaged speaker. | Reduce input level from source/pre-amp; Ensure speakers match amplifier impedance; Replace suspected faulty tubes; Test with different speakers. |
| Humming or buzzing noise | Ground loop; Poor cable shielding; Nearby electrical interference; Faulty tube. | Ensure all components are on the same electrical circuit; Use shielded cables; Move amplifier away from other electronics; Replace suspected faulty tubes. |
| One channel silent or distorted | Faulty input/speaker cable for that channel; Faulty tube in that channel's amplifier; Source issue. | Swap input/speaker cables to isolate problem; Swap tubes between channels (if safe) to identify faulty tube; Test source with another amplifier. |
If the problem persists after trying these solutions, please contact customer support.
User Tips
- Warm-up Time: Allow your amplifier at least 15-30 minutes to warm up for optimal sound quality, especially after being off for a while.
- Tube Rolling: Experimenting with different brands or types of compatible vacuum tubes (known as "tube rolling") can subtly alter the amplifier's sonic characteristics to suit your preference. Always ensure replacement tubes are compatible and correctly installed.
- Speaker Matching: The performance of your amplifier is highly dependent on the speakers it's paired with. Ensure your speakers are efficient enough and have an impedance rating that matches the amplifier's output capabilities for the best sound.
- Cable Quality: High-quality interconnects and speaker cables can make a noticeable difference in sound reproduction.
Warranty and Support
BRZHIFI products are manufactured to high standards and undergo rigorous quality control. For warranty information, please refer to the warranty card included with your product or contact your point of purchase. Please note that vacuum tubes are consumable items and typically have a limited warranty period separate from the main amplifier unit.
For technical support, service inquiries, or to purchase replacement parts, please contact your dealer or BRZHIFI customer service:
- WhatsApp: +86 18774005168
- Email: 18774005168@163.com
When contacting support, please have your product model (PAT-A80) and purchase details ready.