LiitoKala USB-T12

Contents

LiitoKala USB-T12 AAA Rechargeable Li-ion Battery User Manual

Model: USB-T12 (AAA)

1. Introduction

Thank you for choosing LiitoKala USB-T12 1.5V AAA 1200mWh Li-ion rechargeable batteries. These batteries are designed for high performance, convenience, and environmental friendliness, offering over 1500 charge cycles. This manual provides essential information for the safe and effective use of your batteries.

LiitoKala USB-T12 AAA Battery Product Overview

Figure 1: LiitoKala USB-T12 AAA Battery Product Overview, showing batteries, plastic case, 4-in-1 Type-C charging cable, and retail packaging.

2. Safety Precautions

Failure to follow these safety instructions may result in fire, personal injury, or damage to property.

  • Do Not Disassemble: Do not open, modify, or disassemble the battery. Internal components can be damaged, leading to overheating, smoke, deformation, or fire.
  • Avoid Short-Circuiting: Do not connect the positive (+) and negative (-) terminals with metal objects. Avoid storing batteries with metal items like keys or coins. Short-circuiting can cause excessive current flow, leading to overheating, smoke, deformation, or fire.
  • Avoid Heat and Fire: Do not expose batteries to high temperatures, direct sunlight, or dispose of them in fire. Heating can melt the separator, compromise safety features, and ignite the electrolyte.
  • Keep Dry: Do not immerse batteries in water or allow them to get wet. Moisture can damage internal circuits and cause chemical reactions, leading to overheating, smoke, deformation, or fire.
  • Use Correct Charger: Only use a 5V USB power supply and the provided Type-C cable for charging. Using incompatible chargers can cause damage or hazards.
  • Keep Out of Reach of Children: Store batteries away from children to prevent accidental ingestion or misuse.
  • Handle Leaking Batteries with Care: If a battery leaks, avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water and seek medical attention.
  • Do Not Damage: Avoid piercing, hammering, dropping, or otherwise physically damaging the battery.
  • Proper Storage: When not in use for extended periods, store batteries partially charged (not fully charged or fully discharged) in a cool, dry place, away from metal objects.
  • Disposal: Dispose of batteries according to local regulations for lithium-ion batteries. Do not dispose of in household waste.

3. Package Contents

  • LiitoKala USB-T12 AAA Rechargeable Li-ion Batteries (quantity as purchased)
  • Plastic Storage Case (for multiple batteries)
  • 4-in-1 Type-C Charging Cable
LiitoKala USB-T12 AAA Battery Packaging Details

Figure 2: Packaging details, showing the plastic case, retail box, 4-in-1 Type-C charging cable, and four batteries.

4. Setup and First Use

  1. Unpack: Carefully remove the batteries and accessories from the packaging.
  2. Initial Charge: Your batteries may arrive partially charged (typically 1.53-1.54V). For optimal performance, it is recommended to fully charge them before first use.
  3. Charging:
    • Connect the provided 4-in-1 Type-C charging cable to the Type-C port on each battery.
    • Plug the USB-A end of the cable into a standard 5V USB power source (e.g., a phone charger, computer USB port, or USB wall adapter).
    • The indicator light on the battery will flash green during charging.
    • Once fully charged (approximately 1 hour), the indicator light will stop flashing and remain solid green, or turn off depending on the battery's charge state.
  4. Installation: Insert the batteries into your device, ensuring correct polarity (+ and -) as indicated by the device.
LiitoKala USB-T12 AAA Battery Charging

Figure 3: LiitoKala USB-T12 AAA battery being charged via its integrated Type-C port, showing caution text on the battery casing.

LiitoKala USB-T12 AAA Battery Charging Setup

Figure 4: Batteries connected to a wall adapter for charging, illustrating the convenience of charging anytime, anywhere.

5. Operating Instructions

These batteries are designed to replace standard 1.5V AAA alkaline batteries in a wide range of devices.

  • Device Compatibility: Use these batteries in any device that requires 1.5V AAA batteries.
  • Typical Applications: Commonly used in toys, remote controls, wireless mice, wireless keyboards, fans, torches, clocks, floodlights, massage devices, electric shavers/toothbrushes, and trimmers.
  • Constant Voltage: The batteries provide a stable 1.5V output throughout their discharge cycle, ensuring consistent performance in your devices.
LiitoKala USB-T12 AAA Battery Applicable Devices

Figure 5: Examples of applicable devices including toys, mouse, keyboards, clocks, shavers, game controllers, fans, and toothbrushes.

6. Maintenance and Care

  • Recharging: Recharge batteries when device performance diminishes. The built-in protection circuit prevents over-charging and over-discharging.
  • Cleaning: Keep the battery terminals clean and dry to ensure good electrical contact.
  • Storage: Store batteries in their plastic case in a cool, dry place (recommended -5°C to +30°C, 45%-75% RH) when not in use. Avoid extreme temperatures.
  • Cycle Life: These batteries are rated for over 1500 charge-discharge cycles. Performance may gradually decrease after many cycles, as shown in the capacity retention curve.
LiitoKala USB-T12 AAA Battery Capacity Degradation Curve

Figure 6: Battery Capacity Degradation Curve, showing capacity retention over 1500 charge-discharge cycles.

7. Troubleshooting

  • Battery Not Charging:
    • Ensure the Type-C cable is securely connected to both the battery and the USB power source.
    • Verify that the USB power source (e.g., wall adapter, computer port) is functional and providing 5V.
    • Check if the indicator light on the battery is flashing green during charging. If not, try a different cable or power source.
  • Battery Not Powering Device:
    • Confirm that the batteries are inserted with the correct polarity (+ and -) in your device.
    • Ensure the batteries are fully charged.
    • Verify that your device requires 1.5V AAA batteries.
    • Clean the battery contacts in the device and on the batteries themselves.
  • Shortened Run Time:
    • Batteries have a limited number of charge cycles. If they have been used extensively (over 1500 cycles), their capacity may have degraded.
    • Ensure the device is not drawing excessive current, which can deplete batteries faster.

8. Specifications

FeatureSpecification
BrandLiitoKala
ModelUSB-T12 (AAA)
Battery TypeLi-ion
Nominal Voltage1.5V
Rated Power1200mWh (approx. 300mAh)
Input Voltage (Charging)5V
Charging PortType-C
Full Charging TimeApprox. 1 hour
Cycle Life≥ 1500 cycles
MaterialFire-resistant PC + Stainless Steel
Dimensions (Height x Diameter)44.3mm x 10mm
Operating Temperature (Charge)0°C to 50°C
Operating Temperature (Discharge)-20°C to 60°C
Storage Temperature (Long-term)-5°C to 30°C
LiitoKala USB-T12 AAA Battery Product Size

Figure 7: Product dimensions, showing a height of 44.3mm and a diameter of 10mm.

9. User Tips

  • Ready to Use: Batteries often arrive with a good charge (around 1.53-1.54V), so they can be used almost immediately after unpacking.
  • Long-Term Reliability: Users have reported good longevity, with batteries remaining functional for several years.
  • Consistent Performance: The measured capacity during charging typically aligns well with the advertised 1200mWh.

10. Warranty and Support

For warranty information, please refer to the terms provided by your retailer or the official LiitoKala store at the time of purchase. Keep your proof of purchase for any warranty claims.

For further support or detailed technical inquiries, please contact the seller or LiitoKala customer service.

A detailed user manual in PDF format may be available for download from the product page or by contacting the seller. (Reference: User manual (PDF))

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.