LINYILIGHT Motion Sensor LED Strip Light

Contents

USB LED Strip Light Instruction Manual

Model: Motion Sensor LED Strip Light

Brand: LINYILIGHT

1. Introduction

Thank you for purchasing the LINYILIGHT USB LED Strip Light. This flexible and versatile lighting solution features motion detection, adjustable brightness, and multiple operating modes, making it ideal for various applications such as kitchen cabinets, TV backlighting, mirror brightening, and wardrobe lighting. This manual provides detailed instructions for safe installation, operation, and maintenance of your LED strip light.

Application examples of LED strip lights in bedroom, wardrobe, and kitchen cupboard
Image: Examples of the LED strip light installed in various locations like bedrooms, wardrobes, and kitchen cupboards.

2. Safety Information

  • The operating temperature for the sensor should be between -20°C and 40°C. Temperatures outside this range may cause false triggering.
  • The motion sensor is not waterproof. Do not install it in any location with heavy water exposure or high humidity.
  • Ensure the power source (DC 5V) matches the product's specifications.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1 x LED Strip Light (with built-in rechargeable battery)
  • 1 x LED Motion Sensor Control Box
  • 1 x Instruction Manual
USB LED Strip Light with Motion Sensor Control Box, showing warm white and white light options
Image: USB LED Strip Light with Motion Sensor Control Box, illustrating both warm white and white light options.

4. Specifications

Feature Specification
LED Quantity 60 LEDs/meter
Voltage DC 5V
Light Color Options White light (6000K-6500K), Warm light (2700K-3000K)
Sensing Distance 0-5 meters
Detection Angle 180°
Waterproof Rating IP65
LED Type SMD 2835
Available Lengths 1 meter (3.28FT), 2 meters (6.56FT), 3 meters (9.84FT)
Power Source Built-in rechargeable battery (USB charging)
Lamp Bead Lifespan Average 50,000 hours
Luminous Flux 249-2000 lumens
Certifications CE, ROHS
Cool White vs Warm White LED Strip Light color temperatures
Image: Comparison of Cool White (6000K-6500K) and Warm White (2700K-3000K) light options.

5. Product Features

  • Three Operating Modes: Choose between Always Light Mode, "Sun" Mode (24-hour sensing), and "Moon" Mode (sensing only in darkness).
  • High-Quality LED Chips: Utilizes 2835SMD LED chips for high color rendering and low light decay. Features an anti-dead bead design, ensuring that if one LED fails, others remain illuminated.
  • Durable and Waterproof: Fully sealed IP65 waterproof technology allows for use in various environments.
  • Flexible Design: Made from soft, high-transparency latex rubber, the strip is flexible, bendable, and can be cut to your desired length.
  • Easy Installation: Equipped with double-sided adhesive tape for quick and direct application.
  • USB Rechargeable: The control box features a built-in rechargeable battery, eliminating the need for frequent battery replacements.
Product comparison showing old battery model versus new USB charging model
Image: Product comparison highlighting the upgrade to a USB charging model from an old battery model, offering convenience and portability.
LED Strip Light features including waterproof cover, cuttable design, and optimal LED chip
Image: Features of the LED strip, including high transmittance waterproof rubber cover, cuttable design every 3 LEDs, and optimal LED chip for uniform light emission.
Overview of LED strip light features including waterproof, timing, PIR motion sensor, and color options
Image: Overview of the LED strip light's key features, including waterproof design, timing function, PIR motion sensor, and available 2835 Cold White/Warm White options.

6. Setup and Installation

6.1 Preparing the Surface

Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the double-sided tape.

6.2 Cutting the LED Strip (Optional)

The LED strip can be cut to your desired length. Look for the designated cutting marks, typically indicated every 3 LEDs. Cut only along these marks to avoid damaging the circuit.

LED strip cutting design with marks every 3 LEDs
Image: Diagram showing the cuttable design of the LED strip, with marks indicating where to cut without damaging the rest of the strip.

6.3 Attaching the LED Strip

  1. Peel off the backing from the double-sided adhesive tape on the back of the LED strip.
  2. Carefully press the strip onto the desired surface, ensuring firm contact along its entire length.

6.4 Positioning the Motion Sensor Control Box

The motion sensor control box should be positioned strategically for optimal detection. The motion sensor itself can be used in direct light, but the integrated photo eye (light sensor) requires darkness to function correctly in "Moon" mode.

Control box features diagram showing buttons and ports
Image: Diagram detailing the control box, showing the mode indicator light, ON/OFF/Mode button, power interface, charging port, and Dimmer/Timing button.

7. Operation

The control box features two buttons for mode selection, timing, and brightness adjustment.

7.1 Mode Selection (ON/OFF/Mode Button)

This button controls the operating mode of the LED strip:

  1. Press once: Red indicator light on. Activates "Moon" Mode, where the light will turn on only in dark conditions when motion is detected.
  2. Press twice: Blue indicator light on. Activates "Sun" Mode, where the light will turn on when motion is detected, regardless of ambient light conditions.
  3. Press 3 times: Green indicator light on. Activates Always Light Mode, where the LED strip remains continuously lit, and motion sensing is deactivated.
  4. Press 4 times: All three indicator lights flash twice, then the light strip turns off.

7.2 Timing and Brightness Adjustment (Dimmer/Timing Button)

This button controls the duration the light stays on after motion detection and adjusts brightness:

  1. Press once: The light will stay bright for 60 seconds after motion detection.
  2. Press twice: The light will stay bright for 120 seconds after motion detection.
  3. Press 3 times: All three indicator lights flash twice, then the timing settings are reset.
  4. Long press (3 seconds): Adjusts the brightness of the light. The brightness will gradually cycle from minimum to maximum or vice-versa. Release the button when the desired brightness is reached.
Motion sensor light modes and stepless brightness adjustment
Image: Visual representation of stepless brightness adjustment, Sun mode (auto ON, unaffected by ambient light), Moon mode (auto ON when room is dark enough), and 24-hour all-day sensing.

7.3 Charging the Device

The control box has a built-in rechargeable battery. Connect a standard USB cable to the charging port on the control box and plug it into a 5V USB power adapter or computer USB port. The indicator light will show charging status.

8. Maintenance

  • Cleaning: Gently wipe the LED strip and control box with a soft, dry cloth. Do not use abrasive cleaners or immerse the control box in water.
  • Storage: If storing for an extended period, ensure the battery is partially charged and store the device in a cool, dry place away from direct sunlight and humidity.

9. Troubleshooting

  • Light not turning on:
    • Check if the built-in battery is charged.
    • Ensure the correct operating mode is selected (Moon/Sun/Always Light).
    • Verify the motion sensor is not obstructed and is within the recommended operating temperature range (-20°C to 40°C).
  • Sensor not detecting motion:
    • Confirm the sensor is not installed in a high-humidity or wet environment.
    • In "Moon" mode, ensure the environment is sufficiently dark for the photo eye to function.
    • Check for any physical obstructions in the sensor's detection path.
  • Some LEDs are not lighting up:

    The product features an anti-dead bead design. If one LED lamp bead is not bright, other lamp beads should still be normally illuminated and unaffected. This is generally not a product defect unless multiple LEDs are out in a section.

  • False triggering of the sensor:

    Ensure the sensor is not exposed to extreme temperatures outside of -20°C to 40°C, as this can cause false activations. Also, avoid placing the sensor near heat sources or air vents that might cause sudden temperature changes or air movement.

10. User Tips

No specific user tips were available from customer reviews or Q&A for this product. However, here are some general tips for optimizing your experience:

  • For best motion detection, place the sensor where movement is most likely to occur within its 180° detection angle.
  • Experiment with the "Moon" and "Sun" modes to find the best setting for your specific lighting needs and environment.
  • Utilize the long-press brightness adjustment to set the perfect ambiance for any situation.
  • Regularly charge the built-in battery to ensure continuous operation, especially if using in "Always Light" mode or frequently.

11. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact the seller directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual may be available for download from the seller's product page or by contacting customer support.

© 2024 LINYILIGHT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.