1. Product Overview
This HXCONTROLLER MPPT Solar Charge Controller is a smart Maximum Power Point Tracking (MPPT) device designed for off-grid solar systems. It efficiently manages power from solar panels to charge various battery types, offering real-time monitoring and remote control via a mobile application.
Key Features:
- Advanced MPPT Technology: Dynamically tracks the Maximum Power Point (MPP) in real-time, maximizing energy harvest from solar panels, even in varying weather conditions. Achieves up to 98% tracking efficiency and 99% conversion efficiency.
- Built-in WiFi & Smart App: Monitor and control your solar system remotely using the ESP RainMaker App (iOS/Android). Access real-time statistics, adjust charging parameters, and track energy generation directly from your smartphone. (Supports 2.4GHz WiFi only).
- Universal Battery Support: Compatible with 12V–120V battery systems, including Lead-Acid (Flooded, AGM, Gel) and Lithium (LiFePO4, Li-ion) batteries. Features multi-stage charging (Bulk, Absorption, Float, Equalization) to optimize battery health and lifespan.
- High Voltage Input: Supports a maximum PV open-circuit input voltage of 250VDC, allowing for more solar panels to be connected in series. This reduces current, enabling the use of thinner wiring and minimizing power loss over longer distances.
- Industrial-Grade Protection: Constructed with a robust aluminum housing and intelligent cooling fans for durability and efficient heat dissipation. Designed for extreme environments (-35°C to +60°C) and certified with CE/RoHS for safety and reliability.
- LCD Display: Intuitive LCD screen with key navigation for local monitoring and configuration. Displays power generation, PV voltage, battery voltage, charging current, operating status, and power generation charts.

2. Safety Precautions
- Installation should only be performed by qualified personnel.
- Do not exceed the rated voltage or current specifications of the controller.
- Ensure the controller is kept in a dry and well-ventilated area.
- Always disconnect all power sources (solar panels, battery, loads) before performing any maintenance or wiring changes.
- Ensure correct polarity for all connections to prevent damage to the controller and other components.
- Avoid short circuits in the PV array, battery, and load connections.
Installation Clearances:
Observe the following safety clearances to ensure proper heat dissipation and prevent overheating. No other equipment or objects should obstruct these areas.
| Direction | Safety Clearance |
|---|---|
| Left/Right | 20 cm |
| Above | 30 cm |
| Below | 30 cm |
3. Setup and Installation
3.1 Quick Start Wiring Guide
To avoid damage, follow the recommended wiring order:
- Connect DC loads to the Load output terminals (optional).
- Connect batteries to the Battery terminals.
- Connect solar panels to the PV input terminals.
- Ensure correct polarity for all connections before powering on.

3.2 Wi-Fi Setup and App Connection
The controller features built-in Wi-Fi for remote monitoring via the ESP RainMaker app.
- Download the App: Download the ESP RainMaker app from the App Store (iOS) or Google Play Store (Android).
- Power On: After connecting the battery, the controller will power on. The ESP32 module will broadcast a Bluetooth Low Energy (BLE) signal for 30 minutes.
- Add Device: Open the ESP RainMaker app on your phone. Log in or create an account.
- Provisioning: Tap 'Add Device' in the app, choose 'No QR Code', and select 'BLE' as the provisioning method.
- Connect: Look for a device starting with 'PROV_' and tap it.
- Password: Enter the default password:
88888888. Follow the on-screen prompts to complete the Wi-Fi setup. - Troubleshooting: If no 'PROV_' device is found, the BLE signal may have timed out. Go to the controller's Menu > 'Reset Wi-Fi' to re-enable BLE broadcasting.

4. Operation
4.1 LCD Display and Navigation
The controller features an intuitive LCD display and a 4-key interface for navigation:
- MENU: Long press to enter the main menu. Press to confirm selections.
- UP/DOWN: Navigate through menu options.
- BACK: Exit current menu or go back to the previous screen.

4.2 Menu Functions
Access the main menu by long-pressing the MENU button. Use UP/DOWN to navigate and MENU to select.
- Battery Type: Select your battery chemistry (Lead-acid, LiFePO4, NCM, Auto). Ensure this matches your battery for optimal charging.
- Max Charge Current: Set the maximum charging current limit to protect your battery.
- DC Output Setup: Configure the DC load output operation:
- Auto Mode: Output ON when battery voltage is above undervoltage protection value.
- By PV Voltage Threshold: Turn on/off based on PV voltage.
- By Time: Schedule specific on/off times.
- RTC Time: Set the Real-Time Clock for accurate time-based functions.
- Language: Select display language (English/Portuguese).
- Reset Wi-Fi: Re-enable ESP32 BLE for changing or re-pairing Wi-Fi credentials (useful when changing routers or moving location).
4.3 Monitoring
The LCD display and the ESP RainMaker app provide real-time monitoring data:
- PV voltage and current
- Battery voltage and charging current
- Charging power and cumulative energy generation
- Internal temperature and system status
5. Maintenance
- Regularly check all wiring connections for tightness and corrosion.
- Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
- Periodically check the battery terminals for corrosion and clean if necessary.
- Ensure the controller is operating within its specified temperature range.
- If the controller is exposed to harsh conditions, inspect it more frequently for signs of wear or damage.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No display on controller | Check battery connection and fuse. Ensure battery voltage is within operating range. |
| PV LED off | Check solar panel wiring and daylight conditions. Ensure PV voltage is sufficient. |
| Battery not charging | Check battery type settings and voltage in the menu. Ensure PV input voltage is higher than battery voltage. |
| Wi-Fi not connecting | Reset Wi-Fi in the controller's menu and retry BLE pairing. Ensure 2.4GHz network is used. |
| Fan is noisy at low loads | The fan may operate at maximum speed once a certain load (e.g., 10A) is reached, as it does not have speed control. This is normal behavior for some units. |
| Controller stops charging and remains idle even when voltage drops | This can occur if the controller reaches maximum voltage and then does not resume charging automatically. Try going into the menu and temporarily changing the battery type, then changing it back to your correct battery type to re-initiate charging. Ensure battery parameters are correctly set. |
7. Specifications
| Parameter | HX40A | HX60A | HX80A |
|---|---|---|---|
| MPPT Maximum Charging Current | 40A | 60A | 80A |
| Adjustable PV Charging Current | 0-40A | 0-60A | 0-80A |
| PV Max Open-Circuit Input Voltage | 250V | ||
| Battery Voltage | 12/24/36/48/60/72/84/96/108/120V | ||
| Battery Type | Ternary lithium, lithium iron phosphate, lead-acid, gel, user-defined | ||
| PV Min Operating Input Voltage | Must be over 5V higher than the battery pack voltage | ||
| Charging Mode | MPPT Automatic Maximum Power Point Tracking | ||
| PV Minimum Startup Voltage | PV voltage is 5V higher than battery voltage (enables low-current charging even on rainy or cloudy days) | ||
| LCD Presson Buttons | Display: Power Generation, PV Voltage, Battery Voltage, Charging Current, Operating Status, Daily/Monthly Power Generation Chart | ||
| Output Voltage | Follows Battery Pack Voltage | ||
| DC Output Configuration | Off, Auto | ||
| Whether Wi-Fi Function | Built-in Wi-Fi + APP Remote Monitoring | ||
| Standby Power Consumption | 3W | ||
| Overall Efficiency | 99% | ||
| Protection Functions | PV Array Protection: Short Circuit, Overvoltage, Overcurrent, Reverse Polarity; Battery Protection: Overcharge, Reverse Polarity, Undervoltage | ||
| Language type | English and Portuguese | ||
| Equipment Protection Rating | 0-3000m | ||
Important Note on PV Panel Input Voltage:
- Minimum Input: Must be 20V higher than the battery's maximum voltage.
- Maximum Input: 250V.
8. User Tips
- Panel Configuration: For optimal performance, consider connecting solar panels in series to utilize the controller's high voltage input capability. For example, 4 solar panels in series have been reported to work well.
- Seller Support: If you encounter setup or installation issues, the seller is often responsive and helpful in resolving problems quickly.
- Packaging and Build: Users generally report solid build quality and good packaging upon arrival.
- Battery Settings: If the controller stops charging after reaching maximum voltage and doesn't resume, try cycling the battery type setting in the menu (change to another type and then back to your correct type) to re-initiate charging.
9. Warranty and Support
9.1 Warranty Service
This HXCONTROLLER MPPT Solar Charge Controller comes with a one-year free warranty service from the date of purchase. During this period, if the controller malfunctions or sustains component damage under normal operation, technical personnel will inspect the unit. Upon confirmation of eligible faults, free repair services and replacement of defective parts will be provided.
9.2 Warranty Exclusions
The warranty for the controller will be automatically void under the following circumstances:
- Alteration of the company's trademark or serial number.
- Damage caused by improper operation, negligent use, or force majeure events (e.g., natural disasters).
- Unauthorized disassembly, repair, or modification by personnel other than the manufacturer's technical staff.
- Installation not in accordance with the original manufacturer's instructions provided in this manual.
Important: Please retain your purchase receipt (invoice) and this user manual. You must present these documents when requesting warranty service for inspection by technical staff.