1. Product Overview
The Leclstar RGB Bluetooth LED Strip Lights are designed for decorative lighting, offering flexible and vibrant illumination for various indoor settings. These strips feature SMD 5050 LEDs, providing a wide range of colors and effects controllable via Bluetooth app or an infrared remote control. They operate on a safe 5V DC power supply, making them versatile for use with USB power sources.
2. Safety Information
Please read all instructions carefully before using the product.
- This product is not a toy. Keep out of reach of infants and small children.
- Do not dispose of the product in fire.
- Do not expose the product to excessive heat.
- Risk of fire or explosion if used improperly.
- Do not use the string lights if any part of the product is damaged, broken, or loose. Dispose of the product safely in accordance with local regulations.
- Do not disassemble or modify the product.
- Do not install the product near heat sources or flammable materials.
- Use only the power supply or batteries specified by the manufacturer.
3. Package Contents
Please check the package for the following items:
- LED Strip Light(s) (Length varies by model: 3M, 5M, 10M, 20M, 30M)
- IR Remote Control
- USB Power Cable with Integrated Controller Box
4. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Leclstar |
| Item Type | Strip |
| LED Chip Model | SMD5050 |
| LEDs Number/M | 18 |
| Voltage | 5V (DC) |
| Power Source | DC |
| Power Generation | Switch |
| Luminous Flux | <60 |
| Is Smart Device | Yes (Bluetooth App Control) |
| Waterproof | No |
| Certification | CE, EMC, ROHS |
| Occasion | Bedroom (Decorative use) |
| Available Lengths | 3M (10ft), 5M (16ft), 10M (32ft), 20M (65.6ft), 30M (100ft) |
5. Setup Instructions
Follow these steps to install your LED strip lights safely:
- Unpack and Inspect: Remove the product from its packaging and ensure all components are present and undamaged.
- Power Off: Ensure the power supply is switched off before installation.
- Positioning: Arrange the string lights in the desired position. Do not stretch, twist, or apply excessive force to the cable.
- Secure Installation: Secure the string lights properly using the adhesive backing or clips (if included).
- Connect Power: Connect the product to a 5V DC power supply. This can be a mobile power bank, a USB charging head, or a computer USB port.
- Test: Switch on the power to test the product.
6. Operating Instructions
Your LED strip lights can be controlled via the included IR remote or a Bluetooth-enabled smartphone app.
6.1. Remote Control Operation
The IR remote control provides user-friendly operation for various functions:
- Power On/Off: Use the power button to turn the lights on or off.
- Color Selection: Select from a wide range of static colors using the color buttons.
- Brightness Adjustment: Increase or decrease the brightness using the dimming buttons.
- Dynamic Modes: Choose from various pre-programmed dynamic modes (e.g., flash, fade, jump) to create different lighting effects.
- DIY Mode: Some remotes may offer a DIY mode to customize color sequences.
6.2. Bluetooth App Control
For advanced control and customization, download the compatible Bluetooth app (refer to product packaging or seller information for app name). Once installed:
- Enable Bluetooth on your smartphone.
- Open the app and search for your LED strip lights.
- Connect to the device.
- Use the app to access a full spectrum of colors, advanced dynamic modes, music synchronization, and scheduling features.
7. Care and Maintenance
- Clean the product with a dry, soft cloth only.
- Do not immerse the product in water.
- Disconnect the power supply or remove batteries before cleaning or maintenance.
- Store the product in a cool and dry place when not in use.
8. Troubleshooting
- Lights not turning on:
- Check if the power supply is properly connected and switched on.
- Ensure the USB cable and controller are securely plugged into the LED strip.
- If using a remote, check if the battery is inserted correctly and has power.
- Remote control not working:
- Ensure there are no obstructions between the remote and the IR receiver on the controller box.
- Check and replace the remote control battery if necessary.
- App not connecting via Bluetooth:
- Ensure Bluetooth is enabled on your smartphone.
- Make sure the LED strip is powered on.
- Try restarting the app and your phone's Bluetooth.
- Ensure you have downloaded the correct app for your device.
9. User Tips
- Cutting the Strip: If you need to shorten the LED strip, always cut only at the designated marks (usually indicated by a copper pad or scissor icon). Cutting elsewhere will damage the circuit and prevent the remaining section from lighting up.
- Surface Preparation: For best adhesion, ensure the surface where you plan to install the strip is clean, dry, and smooth.
- Avoid Sharp Bends: While flexible, avoid bending the strip at sharp angles to prevent damage to the LEDs or internal wiring.
10. Disposal and Recycling
This product is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive.
The crossed-out wheeled bin symbol indicates that this product must not be disposed of with unsorted household waste. Waste electrical and electronic equipment should be collected and recycled in accordance with applicable local laws and regulations. Please dispose of this product through appropriate collection or recycling facilities available in your area.
11. Warranty and Support
For warranty information and customer support, please refer to the seller's terms or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.