HOMEFISH 5in1 Temperature Humidity Tester CO2 Meter Digital Carbon Dioxide TVOC HCHO Detector Air Quality Monitor

Contents

HOMEFISH 5-in-1 Air Quality Monitor

Model: 5in1 Temperature Humidity Tester CO2 Meter Digital Carbon Dioxide TVOC HCHO Detector Air Quality Monitor

1. Product Introduction

This HOMEFISH 5-in-1 Air Quality Monitor is a multi-functional device designed to detect various real-time air quality indicators. It is widely used in diverse environments such as schools, homes, offices, gyms, cinemas, warehouses, and other public or private spaces. The monitor provides real-time readings for Carbon Dioxide (CO2), Formaldehyde (HCHO), Total Volatile Organic Compounds (TVOC), Temperature, and Humidity.

When any of the main detection indicators exceed their predefined alarm values, the device will trigger a buzzer alarm. This audible alert serves to remind users to pay immediate attention to changes in the air quality index, ensuring a safer and healthier environment.

HOMEFISH 5-in-1 Air Quality Monitor showing CO2, Temperature, Humidity, TVOC, HCHO detection and their ranges.
Figure 1: Overview of the 5-in-1 detection capabilities and measurement ranges.

2. Package Contents

Upon opening the package, please ensure all the following items are present:

  • 1 x HOMEFISH 5-in-1 Air Quality Monitor (Host)
  • 1 x USB Type-C Charging Cable
  • 1 x Instruction Manual (this document)
Contents of the product package including the air quality monitor, USB-C cable, and manual.
Figure 2: Included accessories: Air Quality Monitor, USB Type-C cable, and manual.

3. Setup Guide

3.1 Charging the Device

The device comes with a built-in lithium battery. Before initial use or when the battery is low, please charge the device using the provided USB Type-C cable and a standard DC-5V charger (not included). The charging port is located on the side of the device.

Air quality monitor showing the Type-C charging interface.
Figure 3: Type-C charging interface for the rechargeable battery.

3.2 Placement and Installation

The HOMEFISH Air Quality Monitor offers two installation methods: desktop placement and wall mounting.

  • Desktop Placement: Simply place the device on a flat, stable surface.
  • Wall Mounted: Use the designated mounting points on the back of the device to secure it to a wall.

For accurate readings, ensure the following:

  • The air inlet and outlet on the device are not blocked. Obstructions can lead to numerical deviations.
  • Avoid placing the device in dusty environments with poor air quality, as this can shorten its service life.
  • Do not place the device near high temperatures, high humidity, dirt, or strong magnetic fields, as this can cause inaccurate values or internal circuit faults.
Image showing the air quality monitor in both wall-mounted and desktop placed configurations.
Figure 4: The monitor can be desktop placed or wall-mounted.

4. Operating Guide

4.1 Power On/Off

  1. To Power On: Long press the power button.
  2. Warm-up Period: After powering on, the sensor requires approximately 120 seconds to warm up. During this time, the device will prepare for accurate detection.
  3. Display: Once the warm-up is complete, the real-time index values of the current environment will be displayed on the screen.

4.2 Understanding the Display

The monitor features an LCD digital color screen for easy and clear reading. It displays CO2, HCHO, TVOC, Temperature, and Humidity levels simultaneously.

Product display showing CO2, HCHO, TVOC, Temperature, and Humidity readings.
Figure 5: The monitor's display showing all five measured parameters.

4.3 CO2 Concentration Level Indicators

The device indicates CO2 concentration levels using a flashing light system, providing a quick visual cue of air quality:

  • 0-799 PPM: Green light flashing (Good air quality)
  • 800-1199 PPM: Light green light flashing (Moderate air quality)
  • 1200-1599 PPM: Orange light flashing (Poor air quality, attention needed)
  • 1600-1999 PPM: Flashing red light (Very poor air quality, action required)
  • 2000 PPM and above: Four lights flash (Hazardous air quality, immediate action required)
Diagram illustrating CO2 concentration levels and their corresponding flashing light indicators.
Figure 6: Visual representation of CO2 concentration levels and associated light indicators.

4.4 Fahrenheit Switch and Sensor Calibration

  • Fahrenheit Switch: Click the designated button to switch between Celsius and Fahrenheit temperature display.
  • Calibration Sensor: Double-click the designated button to initiate sensor calibration. This helps maintain accuracy over time.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Environmental Conditions: To prolong the device's service life, avoid frequent use in extremely dusty environments.
  • Storage: Store the equipment and accessories in a temperature range of -10°C to 55°C.
  • Protection: Keep the device away from direct exposure to sunlight, rain, or excessive moisture to prevent damage to the display, battery, housing, and internal circuits.
  • Handling: Do not insert sharp objects, such as needles, into the air inlet, air outlet, or charging port, as this may cause irreversible damage.

6. Troubleshooting

  • Inaccurate Readings: Ensure the air inlet and outlet are not blocked. Avoid placing the device near strong magnetic fields, high temperatures, or high humidity. Perform a sensor calibration if necessary.
  • Device Malfunction: If the ambient temperature is outside the operating range (0°C to 45°C), the device may malfunction. Move it to a suitable environment.
  • No Display/Power Issues: Check if the battery is charged. Connect the device to a DC-5V charger using the USB Type-C cable.
  • Buzzer Alarm Constantly On: This indicates that one or more detected indicators (CO2, HCHO, TVOC) are exceeding their alarm thresholds. Improve ventilation in the area or identify the source of the pollutant.

7. Specifications

Parameter Value
Product Name Air Quality Detector
Material ABS
Battery Built-in 3.7V, 1200mAh Lithium Battery
CO2 Measuring Range 400-5000 PPM
HCHO Measuring Range 0~0.6 mg/m³
TVOC Measuring Range 0~2.0 mg/m³
Temperature Measuring Range 0~50°C
Humidity Measuring Range 0%~99% RH
Operating Temperature 0°C~45°C
Storage Temperature -10°C~55°C
Item Size 90 * 70 * 35mm / 3.54 * 2.76 * 1.38in
Item Weight 100g / 3.53ounce
Package Size 145 * 125 * 45mm / 5.71 * 4.92 * 1.77in
Diagram illustrating the various detection features of the air quality monitor including CO2, HCHO, TVOC, Temperature/Humidity, Automatic Calibration, Anti-interference, Accurate Sensor, Alarm Buzzer, and CO2 Index.
Figure 7: Key features and detection capabilities of the monitor.

8. User Tips

  • Initial Readings: Allow the device to complete its 120-second warm-up period for the most accurate initial readings.
  • Ventilation: If the alarm sounds, immediately increase ventilation in the area by opening windows or doors.
  • Regular Calibration: Periodically calibrate the sensor as instructed to maintain optimal accuracy over time.
  • Stable Environment: For consistent readings, place the monitor in a stable environment away from direct drafts, heat sources, or strong air currents.

9. Support and Contact

For any questions or issues regarding the HOMEFISH 5-in-1 Air Quality Monitor, please refer to the contact information provided by the manufacturer. This information is typically printed on the product packaging label or within the included guideline document.

You can also refer to the full user manual PDF for more detailed information: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.