MRSVI G10S

Contents

MRSVI G10S Air Mouse Voice Remote Control

User Instruction Manual

MRSVI G10S Air Mouse Remote Control with USB receiver and key features highlighted

Universal Air Mouse Remote Control with 2.4G wireless connection, three-axis gyroscope, compatible with Google Voice and multiple devices, offering 10-meter distance control.

1. Setup Instructions

1.1. Battery Installation

The MRSVI G10S remote control requires two AAA batteries (not included).

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover open.
  3. Insert two AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Back view of MRSVI G10S remote with battery compartment open, showing AAA battery slots

Ensure batteries are inserted with correct polarity.

1.2. Initial Connection and Pairing

For initial use, the remote control needs to be paired with your device via the USB receiver.

  1. Plug the USB receiver into an available USB port on your device (e.g., Android TV Box, PC, Projector).
  2. Wait for 20-60 seconds for the device to automatically install the necessary drivers for the USB receiver.
  3. Move the air mouse. If the cursor moves on the screen, pairing is successful.
  4. If pairing is unsuccessful, press and hold the "OK" and "Home" buttons simultaneously. The LED indicator will begin to flash. Release the buttons once the LED stops flashing, indicating successful pairing.
MRSVI G10S remote control, USB receiver, and manual in packaging

The remote control comes with a USB receiver for 2.4G wireless connection.

1.3. IR Learning Function (for Power Key)

The G10S remote supports IR learning for its power button, allowing it to control the power of another IR-enabled device, such as a TV.

  1. Press and hold the "Power" button on the G10S remote until the LED indicator flashes slowly. This signifies entry into IR learning mode.
  2. Point the infrared transmitter of your original TV remote control directly at the IR receiver of the G10S air mouse.
  3. Press the "Power" button on your original TV remote. The G10S remote's LED will light up if the code is successfully received.
  4. The LED will then flash slowly, indicating that the IR learning process is complete.
  5. The learned data will be automatically saved, and the product will exit learning mode.
  6. To clear a learned IR code, press and hold "Power" and "OK" buttons simultaneously.
Diagram illustrating the IR learning process between the G10S remote and a TV remote

The IR learning function allows the G10S to mimic the power button of another remote.

2. Operating Instructions

2.1. Button Functions Overview

The MRSVI G10S features 17 keys for various functions. Refer to the diagram below for key identification:

Labeled diagram of the MRSVI G10S remote control showing all button functions
  • Power / IR Learning Key: Turns the device on/off, also used for IR learning.
  • MIC: Microphone for voice input.
  • Mouse on/off: Toggles the air mouse function.
  • Play/Pause: Multimedia play/pause control.
  • OK/Enter/Mouse Left: Confirms selections, acts as left mouse click.
  • Directional Pad (Up, Down, Left, Right): Navigation.
  • Home/Return: Go back to the home screen or previous screen.
  • Page Up/Page Down: Scrolls pages.
  • Backspace: Deletes characters or goes back.
  • Menu: Accesses menu options.
  • Volume +/-: Adjusts volume.
  • Voice on/off: Activates/deactivates voice input.
  • Mute: Mutes audio.
  • DEL: Delete function.

2.2. Voice Control

The G10S remote control supports voice input for compatible systems like Google Voice.

  1. Press and hold the "Voice Switch" button (MIC icon) to activate the voice channel.
  2. Speak your command clearly into the microphone.
  3. Release the button to turn off the voice channel.
Close-up of the MRSVI G10S remote control highlighting the microphone button for voice search and control

Voice control is compatible with Google Voice for easy command input.

2.3. Somatosensory (Gyroscope) Control

The G10S features a built-in 6-axis gyroscope, allowing you to control the cursor by waving the remote in the air.

Image showing a hand holding the MRSVI G10S remote, with a blue light trail indicating motion control of a cursor on a TV screen

Simply wave your hand to control the cursor in the air freely.

2.4. Cursor Speed Adjustment

The air mouse has 3 levels of cursor speed:

  • From slow to fast: Press and hold the "OK" and "Volume+" buttons. The speed will adjust one level each time the LED lights up.
  • From fast to slow: Press and hold the "OK" and "Volume-" buttons. The speed will adjust one level each time the LED lights up.

3. Maintenance

3.1. Low Battery Reminder

When the AAA battery power of the product drops below 2V, the red LED indicator will flash slowly. This indicates that the batteries need to be replaced.

3.2. Sensor Calibration

Changes in voltage and temperature can sometimes cause the cursor to drift. The G10S features automatic sensor calibration:

  1. If you notice cursor drift, place the air mouse flat on a stable surface (e.g., a desk).
  2. Keep it still.
  3. Press any key to wake it up from hibernation mode. The calibration process will complete automatically.

4. Troubleshooting

  • Remote not responding / Pairing unsuccessful:
    Ensure the USB receiver is properly plugged into the device. Try re-pairing by holding "OK" and "Home" buttons until the LED flashes and then stops. Ensure the remote has fresh batteries.
  • Cursor drifting:
    Perform sensor calibration by placing the remote on a flat surface and keeping it still, then pressing any key to wake it up.
  • Red light always on:
    If the red LED indicator remains constantly lit, try re-installing the batteries. This can help restore normal operation.
  • Voice control not working:
    Ensure you are pressing and holding the "Voice Switch" button while speaking. Verify that your device supports Google Voice or the specific voice assistant the remote is designed for. Not all devices are compatible with voice control.
  • IR learning not working:
    Ensure the G10S remote and the original remote's IR transmitters are pointed directly at each other and are in close proximity during the learning process. Remember that IR learning is typically only for the power key on this model.

5. Product Specifications

FeatureSpecification
ModelG10S
ColorBlack
Transmission Method2.4G RF Wireless
Sensors6-axis Gyroscope
Number of Keys17
Wireless Range>10 meters
Battery Type2 x AAA batteries (not included)
MaterialABS Plastic and Silicone
Dimensions143 x 45 x 29 mm
Weight50g
Working Current< 15mA
Standby Current< 20uA

6. User Tips

  • Battery Life: For optimal performance and to avoid frequent battery changes, consider using high-quality AAA batteries.
  • Voice Command Clarity: When using voice control, speak clearly and directly into the microphone for best recognition. Ensure your device's language settings match your spoken language.
  • Gyroscope Sensitivity: If you find the cursor too fast or too slow, adjust the cursor speed settings as described in Section 2.4.
  • Compatibility Check: While the G10S is broadly compatible, some advanced features like voice control may depend on the specific operating system or application on your connected device. Always check device compatibility if a feature isn't working as expected.

7. Warranty and Support

For detailed information regarding warranty coverage and technical support, please refer to the official user manual PDF available at: MRSVI G10S User Manual (PDF).

If you encounter issues not covered in this manual, please contact the seller or manufacturer's customer support for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.