1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Leeocar Android Touch Screen Car Radio. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Your new head unit features a 10.1-inch IPS HD touch screen, Android 13 operating system, built-in GPS navigation, WiFi connectivity, and support for Wireless/Wired Apple CarPlay and Android Auto. It is designed to enhance your driving experience with modern multimedia capabilities.
2. Package Contents
Carefully unpack the box and ensure all items are present. If any accessories are missing, please contact customer service.
Figure 2.1: Package List and Product Dimensions
- Main Head Unit (10.1-inch Android Touch Screen)
- Installation Guide
- Crowbar (for trim removal)
- Microphone
- USB Cables (4-pin and 6-pin)
- 10-pin Reverse Camera Input Cable
- RCA Cable
- Backup Camera
- GPS Antenna
- Power Harness (with CANBUS box pre-connected)
- CAM-IN Cable
Important Note: The CANBUS box is pre-connected to the wiring harness. Do not disconnect it, as functions may be disabled.
3. Specifications
Figure 3.1: System Specifications
| Feature | Description |
|---|---|
| Brand Name | LEEOCAR |
| Operating System | Android 13 |
| RAM | 4G (Also available in 2G variants) |
| ROM | 64G (Also available in 32G variants) |
| Display Size | 10.1 inches |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Max External Memory | 64G |
| TF/Micro SD Slot | 2 |
| Interface | USB/RCA |
| Digital Media Format | MP4, Mp3, WMA, JPEG |
| Special Features | WiFi function, Support 4G Network, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus |
| Tuner Type | Support FM, AM (Optional) |
| GPS Navigation Map | Built-in offline map, free update |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
| Material | Composite Material |
| Warranty | 1 Year |
Figure 3.2: Product Dimensions
4. Installation and Setup
Warning: Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the vehicle's battery before installation.
Figure 4.1: Compatibility Note - Does not fit original stereo with large screen.
4.1 General Wiring Diagram
The head unit is equipped with two types of power cables. Use the one that matches your vehicle's original wiring. Ensure all cables are connected tightly to prevent malfunctions.
Figure 4.2: Main Wiring Connections
If you are unsure about the correct power cable or any wiring, consult customer service before proceeding.
4.2 Rear Camera Wiring Tutorial
To connect the rear camera, follow these steps:
- Connect the red cable (①) to the backup light's positive ("+") terminal.
- Connect the black cable (②) to the backup light's negative ("-") terminal.
- Connect the reversing detection cable (③, usually labeled "G5") to the white cable (③) extending from the video input cable.
Figure 4.3: Rear Camera Connection Diagram
Please Note: The unit's Bluetooth & WiFi antenna and the Reverse Camera RCA are bundled together. Whether you install a reversing camera or not, please insert the Camera RCA into the 10-pin port.
For a visual guide, scan the QR code below to watch the tutorial video:
Scan for Rear Camera Wiring Video
4.3 Steering Wheel Controls Setup
To set up steering wheel controls:
- Go to Settings > Protocol Settings > Car Model and select NULL > OTHER > NoProtocol-Null.
- Open the Control app on the radio.
- Refer to the app's instructions to manually learn the steering wheel control keys.
Figure 4.4: Steering Wheel Control Settings Interface
For further guidance, scan the QR code below to watch the tutorial video:
Scan for Steering Wheel Controls Setup Video
5. Operating Instructions
5.1 GPS Navigation
The unit comes with a built-in offline map and supports free updates. You can also use online navigation apps via WiFi connection.
Figure 5.1: Online/Offline GPS Navigation and WiFi Connection
5.2 Radio and Bluetooth
Enjoy RDS FM Radio with preset stations. The unit also supports Bluetooth for hands-free calls and music streaming.
Figure 5.2: RDS FM Radio and Bluetooth Features
5.3 Apple CarPlay & Android Auto
Connect your smartphone for seamless integration with Apple CarPlay (Wireless/Wired) and Android Auto (Wireless/Wired).
Figure 5.3: Wireless/Wired Apple CarPlay & Android Auto
Connecting to Wireless CarPlay (or Android Auto) using Carlink 2.0:
- Turn on Bluetooth on the radio and connect it to your phone's Bluetooth. The default pairing code is 0000.
- For Android users: Ensure your phone supports Android Auto and that the app is installed from the Play Store.
- Open the Carlink 2.0 app on the radio to activate CarPlay or Android Auto.
- On your phone, go to Bluetooth settings, tap the connected radio device, select Device Type, and set it to Car Stereo.
- If prompted, tap "Turn on Wi-Fi & Use CarPlay" to complete the wireless setup.
For a step-by-step video tutorial, scan the QR codes below:
Apple CarPlay
Android Auto
5.4 Split Screen Functionality
The 10.1-inch IPS HD touch screen supports split-screen mode, allowing you to run two applications simultaneously, such as navigation and music playback.
Figure 5.4: Split Screen Display
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
- Software Updates: It is generally not recommended to update the system or firmware unless specific issues are encountered. Unnecessary upgrades may affect system stability. If you experience issues, contact customer support before attempting any updates.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
7. Troubleshooting (FAQ)
Q1: What is the password for accessing the Factory settings menu?
A: To access the Factory Settings, please enter "3368" when prompted.
Q2: The steering wheel buttons for volume up/down or track forward/backward are functioning in reverse. How can I correct this?
A: Go to Settings > Factory (enter "3368") > Original Car Agreement. Locate and toggle the "Reversal Volume" or "Reversal Previous and Next" option to correct the button functions.
Q3: Why is the time displayed on the radio inaccurate?
A: Ensure the GPS antenna is properly connected and securely fastened. Install the antenna near the A-pillar or just outside the dashboard for optimal signal. Then, connect the radio to Wi-Fi or a mobile hotspot, go to Settings > System > Date and Time, and enable "Use network-provided time" and "Use network-provided time zone." This will synchronize the time using GPS and network data.
Q4: The reverse camera image appears mirrored (left and right are flipped). How can I correct this?
A: Go to Settings > General, then toggle the "Mirror view on reverse image" option to correct the orientation.
Q5: How can I remove the reverse parking guidelines on the screen?
A: Go to Settings > Factory (enter "3368") > Original Car Agreement, then turn OFF the "Reverse Parking Line" option.
Q6: Why is my Wi-Fi or Bluetooth connection unstable?
A: Check that the 10-pin reverse camera input cable is properly connected to the radio. The small wires next to this connector are responsible for receiving Wi-Fi and Bluetooth signals. For optimal performance, avoid using Wi-Fi and Bluetooth simultaneously, as this can sometimes cause interference.
Q7: How can I change the startup (boot) logo on the radio?
A: Go to Settings > Factory (enter "3368") > Boot Screen Logo. To use a custom logo, save a 1280x800 BMP image in a folder named "mycar" at the root directory of a USB drive. Connect the USB drive to the radio via the supplied USB cable. The image will then appear as a selectable option in the Boot Screen Logo settings.
Q8: What should I do if there is no sound after installing the radio?
A: If you are using the "XC-1396" harness, connect the two plugs as shown in the image below. This connection is necessary for proper audio output.
Figure 7.1: Audio Output Wiring for XC-1396 Harness
8. User Tips
- GPS Antenna Placement: For the best GPS signal, ensure the antenna is installed in an open area, ideally near the A-pillar or just outside the dashboard.
- Stable Connections: Always ensure all wiring connections, especially for power, camera, and antennas, are secure and tight to prevent intermittent issues.
- Avoid Simultaneous WiFi/Bluetooth: If you experience connection instability, try to avoid using both Wi-Fi and Bluetooth simultaneously, as this can sometimes cause interference.
- Professional Installation: If you are not confident with car electronics installation, professional installation is highly recommended to avoid damage to the unit or your vehicle.
9. Warranty and Technical Support
Your Leeocar Android Touch Screen Car Radio comes with a 1-year warranty.
For any issues not covered in this manual or for further technical assistance, please contact our customer support team. They are equipped to provide real-time expert support and guidance on system upgrades.
You can also visit our official website for after-sales support and to access forums for questions and issues. Scan the QR code below to access support resources:
Scan for Technical Support Website
Note: Any barcodes on the product packaging are for warehouse outbound use only and are not relevant for installation or support.