1. Introduction
This manual provides essential information for the safe and effective use of Murata SR936SW 394 button cell batteries. These batteries are commonly used in various small electronic devices such as watches and calculators. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Murata SR936SW 394 battery packaging and individual battery.
2. Important Safety Warnings
⚠️ KEEP OUT OF REACH OF CHILDREN
- If swallowed, a button battery can cause severe or fatal injuries within 2 hours.
- Swallowing can lead to chemical burns, perforation of soft tissue, and death.
- Severe burns can occur within 2 hours of ingestion.
- In case of ingestion, seek medical attention immediately.
- If you think batteries may have been swallowed or placed inside any part of the body, seek medical attention.
General Battery Safety:
- Do not recharge, disassemble, heat, or dispose of in fire.
- Do not short-circuit the battery.
- Do not mix old and new batteries, or different types of batteries.
- Ensure correct polarity (+/-) when installing.
- Remove exhausted batteries promptly from devices.
3. Specifications
| Feature | Description |
|---|---|
| Brand Name | MURATA |
| Model | SR936SW (Equivalent to 394) |
| Battery Type | Button Cell Battery |
| Origin | Mainland China |
| High-concerned chemical | None |
4. Setup and Installation
Installing the Murata SR936SW 394 battery typically involves replacing an existing battery in a compatible device. Always refer to your device's specific instruction manual for detailed battery replacement procedures.
- Identify Battery Compartment: Locate the battery compartment on your device (e.g., watch, calculator). This may require a small screwdriver or a specialized tool to open.
- Remove Old Battery: Carefully remove the exhausted battery. Note its orientation (positive and negative terminals).
- Insert New Battery: Insert the new Murata SR936SW 394 battery, ensuring the positive (+) and negative (-) terminals match the markings in the compartment. The positive side is usually marked with a '+' sign and is often the flat, wider side of the button cell.
- Secure Compartment: Close the battery compartment securely.
- Test Device: Power on your device to confirm the battery is correctly installed and functioning.
Note: Avoid touching the battery terminals with bare hands, as oils from your skin can affect battery performance and lifespan.
5. Operating Instructions
Once installed, the Murata SR936SW 394 battery will power your device. No specific operating instructions are required for the battery itself beyond proper installation. The device will draw power as needed until the battery is depleted.
- Ensure your device is turned off before replacing the battery.
- If the device does not power on after battery replacement, double-check the battery orientation.
- Dispose of used batteries responsibly according to local regulations.
6. Maintenance and Storage
Proper maintenance and storage can extend the shelf life of your batteries and ensure safety.
- Storage: Store unused batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid Contact: Do not store batteries loosely or in contact with metal objects (like coins or keys), as this can cause short-circuiting and heat generation.
- Cleaning: If battery terminals appear dirty, gently wipe them with a clean, dry cloth before installation.
- Disposal: Dispose of depleted batteries according to local environmental regulations. Many communities have battery recycling programs.
7. Troubleshooting
If your device is not functioning after installing a new battery, consider the following:
- Incorrect Polarity: Verify that the battery is inserted with the correct positive (+) and negative (-) orientation.
- Poor Contact: Ensure the battery makes firm contact with the device's terminals. Gently clean the terminals if they appear corroded or dirty.
- Depleted Battery: Although new, a battery might be faulty or have a low charge. Try another new battery if available.
- Device Malfunction: If the issue persists, the problem might be with the device itself, not the battery. Consult your device's manual or a qualified technician.
8. User Tips
- Always keep spare batteries on hand for critical devices like medical monitors or security sensors.
- When replacing multiple batteries, replace them all at once to ensure consistent performance.
- For watches, consider having a professional watchmaker replace the battery to avoid damaging delicate internal components or compromising water resistance.
9. Warranty and Support
For product support or inquiries regarding Murata batteries, please refer to the official Murata website or contact your retailer. Keep your purchase receipt as proof of purchase.
10. Statement of Compliance
This product complies with relevant safety standards for button cell batteries. For detailed test reports and compliance documentation, please refer to the official product page or contact the manufacturer.
Disclaimer:
⚠️ KEEP OUT OF REACH OF CHILDREN. In case of ingestion seek medical attention immediately.