Mercedes Benz Vito V260 W447 W448

Contents

Instruction Manual

Center Air Vent Assembly for Mercedes-Benz Vito W447/W448

Model: Vito V260 W447 W448 | OEM NO.: 4478300454, 4478300654

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your new Center Air Vent Assembly, designed as a direct replacement part for specific Mercedes-Benz Vito models. Please read all instructions carefully before proceeding with installation or use to ensure proper function and safety.

2. Important Safety Information

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Product Overview

The Center Air Vent Assembly is a high-quality replacement part for the dashboard air conditioning outlet in compatible Mercedes-Benz Vito vehicles. It is designed for a seamless connection and durable performance, matching original vehicle dimensions.

Two Center Air Vent Assemblies

Figure 3.1: Two Center Air Vent Assemblies (Left and Right)

Video 3.1: Overview of the W447 Air Vent Assembly, highlighting its features and fit.

Key Features:

  • Direct replacement for original part.
  • Easy installation.
  • Durable construction with improved material.
  • Seamless connection to original vehicle dimensions.
  • Correct connector, no cutting or splicing required.
  • Manufactured under strict quality control standards.

4. Setup and Installation

Installation of specialized auto parts for specific vehicles, such as this air vent assembly, is recommended to be performed by professional repair shops. This ensures correct fitment, avoids damage to the vehicle or the part, and maintains vehicle integrity.

Installation Overview:

  1. Carefully remove the existing air vent assembly from the dashboard.
  2. Ensure the new vent assembly aligns perfectly with the dashboard opening and existing connectors.
  3. Secure the new vent assembly in place.
  4. Test the functionality of the vent (airflow direction, opening/closing).
Installed air vent assembly in Mercedes-Benz Vito dashboard

Figure 4.1: Air conditioning air outlet assembly installed in a Mercedes-Benz Vito dashboard.

Close-up of middle left air vent assembly installed

Figure 4.2: Close-up view of the middle left air conditioning vent assembly installed.

Detailed views of the air vent assembly components

Figure 4.3: Detailed views of the air vent assembly, showing its construction and fit.

5. Operating Instructions

The air vent assembly operates identically to the original factory part. Adjust the direction of airflow by manipulating the louvers. The integrated knob allows for opening and closing the vent to control air volume.

6. Maintenance

To maintain the appearance and functionality of your air vent assembly:

  • Regularly wipe the surface with a soft, damp cloth to remove dust and debris.
  • Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic finish.
  • Ensure no foreign objects obstruct the louvers or internal mechanisms.

7. Troubleshooting

If you experience any issues with the air vent assembly after installation:

  • Improper Fit: Re-check the installation steps. If the issue persists, professional installation is highly recommended to ensure correct alignment and secure fitting.
  • Restricted Airflow: Inspect the vent for any obstructions. Ensure the vent is fully open and the louvers are not stuck.
  • Damaged Part: If the part arrived damaged or becomes damaged during installation, contact the seller for assistance.

8. Specifications

Attribute Detail
Product Name Center Air Vent Assembly
Compatibility Mercedes-Benz Vito V260, W447, W448 (after 2016)
OEM NO. 4478300454, 4478300654
Item Type Air-conditioning Installation
Material Plastic (Note: Silver parts, if any, are ABS plastic chrome-plated)
Dimensions (approx.) Length: 111.08 mm (4.37 in)
Width: 77.83 mm (3.06 in)
Height: 63.931 mm (2.52 in)
Weight (approx.) 161.4 g
Origin Mainland China
Dimensions of the air vent assembly in millimeters and inches

Figure 8.1: Detailed dimensions of the air vent assembly.

9. User Tips

  • For optimal performance and longevity, ensure the vent is securely fastened and free from excessive vibration.
  • If you are replacing only one vent, consider checking the condition of the other vents for consistent appearance and function.
  • Always double-check compatibility with your specific Mercedes-Benz Vito model year before purchase and installation.

10. Manufacturer Information & Support

Manufacturer: Guangzhou Oukachi Automotive Parts Co., Ltd
Room 304, Building 2, No. 55 Yufeng 2nd Street, Dashi Street, Panyu District, Guangzhou City, Guangdong Province, China 440113

EU Authorized Representative: SUCCESS COURIER SL
CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

For support or inquiries, please contact the seller or manufacturer directly using the provided contact information.

© 2024 GuailihuAutoParts Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.