SEAMETAL C42967

Contents

SEAMETAL Motorcycle Side Stand Pad User Manual

Model: C42967

1. Introduction

Thank you for choosing the SEAMETAL Motorcycle Side Stand Pad. This product is designed to provide a more stable parking solution for your motorcycle, preventing the side stand from sinking into soft ground or hot asphalt. Made from durable aluminum alloy, it offers corrosion resistance and a robust design for long-lasting performance.

2. Safety Information

  • Ensure the side stand pad is securely installed before use.
  • Regularly check the tightness of all screws to prevent loosening during operation.
  • Do not attempt to modify the product, as this may compromise its structural integrity and safety.
  • Always park your motorcycle on a stable, level surface. The side stand pad enhances stability but does not eliminate the need for careful parking.

3. Package Contents

Please check the package for the following items:

  • 1x Motorcycle Foot Support Pad (Base and two decorative plates)
  • Mounting Screws
  • 1x Allen Key for installation
Exploded view of SEAMETAL side stand pad components

Figure 3.1: Package Contents - Base, decorative plates, screws, and Allen key.

4. Specifications

FeatureDetail
MaterialAluminum Alloy
Available ColorsBlack, Red, Gold, Blue, Gray
Overall Dimensions (L x W x H)7.33 cm (2.88 in) x 5.68 cm (2.23 in) x 1.30 cm (0.51 in)
Inner Base Length5.86 cm (2.30 in)
Inner Base Width (Max/Min)3.39 cm (1.33 in) / 3.13 cm (1.23 in)
CompatibilityUniversal for most motorcycles with side stand dimensions smaller than the inner base. Specifically mentioned: NMAX155, XMAX300, PCX160, PCX150, TR300, GSX250R, Forza 300, NSS350.
FeaturesHeavy Duty, Corrosion Resistant, No Fading, Double Anti-slip Grooved Bottom
Dimensions of the side stand pad

Figure 4.1: Detailed dimensions of the side stand pad.

Inner dimensions and scope of application

Figure 4.2: Inner base dimensions and compatibility note. Ensure your motorcycle's side stand foot is smaller than these dimensions for proper fit.

5. Setup and Installation

Follow these steps to install your SEAMETAL Motorcycle Side Stand Pad:

  1. Prepare the Side Stand: Ensure your motorcycle's side stand foot is clean and free from dirt or debris.
  2. Check Fitment: Place the main base of the side stand pad under your motorcycle's side stand foot to confirm it fits within the inner dimensions (refer to Figure 4.2). If the side stand foot is larger, the pad will not install correctly.
  3. Assemble the Pad: Position the two decorative plates onto the main base, aligning the screw holes.
  4. Secure the Plates: Insert the provided screws through the decorative plates and into the main base. Use the included Allen key to tighten the screws securely. Do not overtighten.
  5. Final Check: Once assembled, place the pad under your motorcycle's side stand. Ensure the side stand foot rests firmly and centrally on the pad. The pad should not wobble or shift excessively.
Side stand pad installed on a motorcycle

Figure 5.1: Example of the side stand pad installed on a motorcycle kickstand.

Close-up of installed side stand pad

Figure 5.2: Close-up view of the side stand pad in use.

6. Operating Instructions

The SEAMETAL Motorcycle Side Stand Pad is a passive accessory. Once installed, simply deploy your motorcycle's side stand as usual. The pad will provide a larger, more stable footprint, distributing the weight of your motorcycle over a wider area. This helps prevent the stand from sinking into soft surfaces like dirt, grass, gravel, or hot asphalt.

7. Maintenance

  • Cleaning: Clean the side stand pad periodically with a damp cloth to remove dirt and grime. Avoid using harsh chemicals that may damage the finish.
  • Inspection: Regularly inspect the pad for any signs of wear, damage, or loose screws. Ensure the anti-slip texture on the bottom is intact.
  • Screw Tightness: Check the tightness of the mounting screws every few weeks or before long rides to ensure they remain secure.

8. Troubleshooting

  • Pad Does Not Fit: If the side stand pad does not fit your motorcycle's kickstand, verify the dimensions of your kickstand foot against the inner dimensions provided in the specifications (Figure 4.2). Some motorcycle kickstands may require minor trimming for a perfect fit.
  • Pad Feels Loose: Ensure all mounting screws are tightened securely. If the pad still feels loose, re-check the fitment against your kickstand.
  • Motorcycle Still Unstable: While the pad enhances stability, always ensure your motorcycle is parked on a level and firm surface. The pad is designed to prevent sinking, not to correct parking on uneven terrain.

9. User Tips

  • Verify Dimensions: Before purchasing or installing, carefully measure your motorcycle's side stand foot. Compare these measurements to the inner dimensions of the pad (Max. 5.86cm length, 3.39cm max width) to ensure compatibility.
  • Minor Adjustments: For some motorcycle models, users have found that slight trimming of the kickstand's end might be necessary for a snug fit. Proceed with caution if attempting this.
  • Oval Kickstands: The pad is best suited for kickstands with an oval shape, with a maximum width of approximately 31mm and a length of 57mm for optimal fit.
  • Check Compatibility Lists: While universal, specific models like Yamaha Tenere 250 or Tracer 900GT (2019) might require modifications or may not fit perfectly. Always cross-reference with known compatible models if possible.

10. Warranty and Support

For any questions, concerns, or support regarding your SEAMETAL Motorcycle Side Stand Pad, please contact your retailer or the manufacturer's customer service. Please retain your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.