Roadsun 1156 BA15S P21W, 1157 BAY15D

Contents

Roadsun Ultra Bright LED Brake Stop Reverse Light User Manual

Models: 1156 BA15S P21W, 1157 BAY15D

Thank you for choosing Roadsun LED Car Lights. This manual provides essential information for the safe and effective use of your new LED bulbs.

1. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electrical shock, fire, or serious injury.

  • Always disconnect the vehicle's battery before performing any electrical work.
  • Ensure the vehicle's ignition is off and the engine is cool before handling bulbs.
  • Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
  • Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

2. Product Overview

The Roadsun Ultra Bright LED Brake Stop Reverse Lights are designed to provide superior illumination for your vehicle's reverse, brake, stop, and turn signal functions. These bulbs feature advanced LED technology for enhanced brightness, efficiency, and longevity.

LED Brake Stop Reverse Light bulbs with a car in the background, illustrating their use.

Figure 1: Roadsun LED Brake Stop Reverse Lights (1156/1157)

Key Features:

  • Ultra Bright Illumination: Equipped with 45pcs 4014 SMD LED chips for high-purity brightness and 360° full angle illumination.
  • Energy Efficient: Low power consumption compared to traditional halogen bulbs.
  • Long Lifespan: Designed for over 50,000 hours of working life.
  • Fast Heat Dissipation: Constructed with aviation aluminum for better heat management, ensuring stable performance and longevity.
  • Diagram illustrating the fast heat dissipation mechanism of the LED bulb, showing airflow and temperature range.

    Figure 2: Fast Heat Dissipation Design

  • Plug and Play Installation: Direct replacement for most 98% of cars, requiring no modification to the car's wiring.
  • Optimal Luminous Point: Engineered to have a light-emitting point close to the original car halogen lamp for consistent beam patterns.
  • Comparison image showing the luminous point of the LED bulb versus an old halogen bulb, highlighting the similar light output position.

    Figure 3: Same Luminous Point Comparison

  • Durable Construction: Made with aviation aluminum and 4014-45SMD copper bracket high-quality lamp beads for robust performance.
  • Diagram detailing the construction of the LED bulb, highlighting aviation aluminum material, 4014-45SMD copper bracket lamp beads, smart chip, and original position socket.

    Figure 4: Quality Materials and Craftsmanship

  • Harsh Environment Ready: Designed to withstand various environmental conditions.
  • Image demonstrating the LED bulbs' resistance to harsh environments, showing them splashed with water.

    Figure 5: Suitable for Harsh Environments

3. Specifications

Parameter Specification
Model 1156 BA15S P21W, 1157 BAY15D
LED Chip 45pcs 4014 SMD
Power 6W/SET
Lumen Approximately 2000LM/SET
Color 6000K White
Working Voltage DC 9-16V (designed for 12V cars)
General Operating Voltage Range DC 12-24V
Beam Angle 360°
Lifetime More than 50,000 hours
Operating Temperature -40°C to +80°C
Certifications CE & RoHS Compliant
Origin Mainland China
Product size diagram and parameter table for the 1156 BA15S LED bulb, including dimensions and specifications.

Figure 6: 1156 BA15S Product Dimensions and Parameters

Product size diagram and parameter table for the 1157 BAY15D LED bulb, including dimensions and specifications.

Figure 7: 1157 BAY15D Product Dimensions and Parameters

4. Installation / Setup

These LED bulbs are designed for a straightforward 'Plug and Play' installation for most vehicles. No complex wiring modifications are typically required.

  1. Verify Compatibility: Before installation, check local LED regulations and compare the bulb size and interface type (BA15S/1156 or BAY15D/1157) with your vehicle's OEM specifications to ensure a proper fit.
  2. Access Bulb Socket: Locate the existing bulb socket in your vehicle's light assembly (e.g., reverse light, brake light, turn signal). Refer to your vehicle's owner's manual for specific instructions on accessing these components.
  3. Remove Old Bulb: Carefully remove the old halogen bulb by twisting or pulling it out, depending on the socket type.
  4. Insert LED Bulb: Insert the new Roadsun LED bulb into the socket. Ensure it is seated firmly and correctly.
  5. Test Functionality: Before reassembling the light housing, test the new LED bulb by turning on the corresponding light function (e.g., reverse, brake, turn signal).
  6. Secure Assembly: If the bulb functions correctly, reassemble the light housing and any other components removed during installation.

5. Operation

Once correctly installed, your Roadsun LED bulbs will operate automatically with your vehicle's existing lighting system. They provide instant-on, bright illumination for improved visibility and safety.

  • Reverse Lights: Activate when the vehicle is shifted into reverse gear.
  • Brake/Stop Lights: Illuminate when the brake pedal is pressed.
  • Turn Signals: Flash when the turn signal lever is engaged.

6. Maintenance

Roadsun LED bulbs are designed for long-term, maintenance-free operation. No regular maintenance is required for the bulbs themselves.

  • Keep the light assembly clean from dirt and debris to ensure maximum light output.
  • Avoid using harsh chemicals or abrasive materials when cleaning the light covers.

7. Troubleshooting

Common Issues and Solutions:

Issue: Both sides flicker, experience interference, or an error light appears on the dashboard.

Solution: Some vehicles, especially newer models with CANbus systems, may require additional components to prevent these issues when upgrading to LED bulbs. Your car may need resistor cancelers or decoders to resolve flickering, hyper-flashing (for turn signals), or error messages. These are typically not included with the bulbs and must be purchased separately if needed.

Issue: LED bulb does not light up.

Solution:

  • Ensure the bulb is correctly seated in the socket.
  • Check the polarity. Some LED bulbs are polarity-sensitive. Try rotating the bulb 180 degrees in the socket.
  • Verify that the vehicle's fuse for the corresponding light circuit is intact.
  • Confirm the vehicle's battery is properly connected and charged.

8. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always ensure proper installation and check local regulations for LED lighting.

9. Warranty and Support

Roadsun LED Brake Stop Reverse Lights come with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For detailed item guides and documents, including the full user manual in PDF format, please refer to the official product page or download the PDF directly: User Manual (PDF).

If you encounter any issues or have questions not covered in this manual, please contact Roadsun customer support through your purchase platform for assistance.

© 2024 Roadsun. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.