MILESEEY PF210

Contents

MILESEEY PF210 Laser Rangefinder User Manual

Model: PF210 | Brand: MILESEEY

1. Product Overview

Thank you for using the MILESEEY laser rangefinder. Please read this instruction manual carefully before operation.

The PF210 series is a portable laser rangefinder designed for hunting, hiking, and other outdoor activities. It provides precise range readings from 3.3-800 yards (3-730 meters) with an accuracy of +/- 0.5m at maximum range.

The rangefinder is encased in environmentally friendly, harmless, non-slip, and wear-resistant soft rubber materials, making it compact, light, comfortable to hold, and easy to carry.

The PF210 utilizes TOF (Time of Flight) technology to measure linear distance, vertical height, horizontal distance, and speed.

It offers multi-functional features with high accuracy, quick response, intuitive distance display, and low power consumption, making it an ideal assistant for outdoor activities.

MILESEEY PF210 Laser Rangefinder
Figure 1: MILESEEY PF210 Laser Rangefinder
MILESEEY PF210 packaging and accessories including rangefinder, carrying case, manual, cleaning cloth, carabiner, and battery.
Figure 2: Product packaging and included accessories

2. Safety Instructions

2.1. Warning

  • Do not stare into the laser beam.
  • Eyes can be permanently damaged if you look directly at the sun through the device.
  • Do not aim the device at the sun, as it will cause permanent damage to the internal components.
  • Keep the eyepiece away from direct sunlight.
Laser warning symbols indicating Class 1 laser product and caution against direct eye exposure.
Figure 3: Laser Safety Warning

CAUTION: CLASS 1 LASER PRODUCT CONSUMER LASER PRODUCT IEC 60825-1:2014 EN 50689:2021 WAVELENGTH 905nm

  • Do not store the device outside the temperature range of -10~45°C.

2.2. Disposal

  • Everyone is responsible for environmental protection.
  • It is prohibited to dispose of used batteries with household waste. Please collect used batteries at designated refuse collection centers.
  • This product must not be recycled with household waste. Dispose of the product appropriately in accordance with national regulations in your country.

2.3. Scope of Responsibility

MILESEEY will not be responsible for any loss resulting from the use of accessories from other manufacturers without MILESEEY's approval.

3. Battery Installation

Important Safety Instructions for CR2 battery

  • Always insert the CR2 battery correctly according to the polarity (+ and -) marked on the battery and the equipment.
  • Do not dispose of batteries in fire.
  • Keep batteries out of reach of children and pets.
  • The device comes with an 800mA CR2 lithium battery.
  • When the low battery indicator "" is displayed, please replace with a new battery.
  • NOTE: We recommend removing the battery if the unit will not be used for a long time and storing it in dry conditions.

Installation Steps:

  1. Push the button towards the arrow indicator side to open the battery compartment.
  2. Diagram showing how to open the battery compartment by pushing a button.
    Figure 4: Opening the battery compartment
  3. Install 1x CR2 battery, observing correct polarity. Incorrect polarity may damage the device due to a short circuit.
  4. Diagram showing correct CR2 battery insertion into the compartment.
    Figure 5: Inserting the CR2 battery
  5. After installation, press the battery cover to close it securely.
  6. Diagram showing the battery compartment closed after installation.
    Figure 6: Closing the battery compartment

4. Product Components

Diagram of the MILESEEY PF210 Laser Rangefinder with numbered components.
Figure 7: PF210 Component Diagram
  1. Eyepiece knob
  2. Eyepiece
  3. Battery compartment
  4. Power/Measure button
  5. Mode/Unit switch button (M)
  6. Laser Emitter lens
  7. Objective Lens/Laser receiving lens

5. Icons on LCD Display

The LCD display shows various digital signs. Refer to the example picture for icon identification:

Diagram of the LCD display showing various icons and their corresponding labels.
Figure 8: LCD Display Icons
  1. Low battery indicator
  2. Rain fog mode icon
  3. Measure distance, unit (m, yd, km/h)
  4. Vertical height (between two points)
  5. Bull's eye (target reticle)
  6. Measuring data, unit (m, yd)
  7. Angle data
  8. Auto Height Mode (VD)
  9. BOW Mode (HD)

6. Initial Operation and Settings

6.1. Eyepiece Adjustment

Adjust the eyepiece knob to focus on the target.

Diagram showing how to adjust the eyepiece knob for focusing.
Figure 9: Eyepiece Adjustment

6.2. Unit Change

Long press the M button to change the unit between meters (m) or yards (yd).

6.3. Operation Instructions

  1. Press the Power button to turn ON the device.
  2. Adjust the eyepiece to focus on the target before measuring.
  3. Short press the M button to switch between different measurement modes.

If the target reflection is weak or beyond the measuring range, the display will show "---".

The measurement range is affected by factors such as target material, inclined angle of the target surface, and weather visibility. Generally, a smooth, bright, and larger target surface, with the laser beam perpendicular to it, and cloudy weather without fog, will result in a longer measurement range.

7. Measurement Modes

Video 1: Demonstration of MILESEEY PF210's various measurement modes including focus adjustment, angle & scanning, rain & fog ranging, BOW mode (HD), auto height mode (VD), vertical height (HT), and speed measuring mode.

7.1. Rain and Fog Ranging Mode (Long-Range Priority)

This mode is primarily used for measurements in rainy and foggy conditions. Due to the influence of raindrops, you may receive some invalid values. This mode prioritizes long-range results for accuracy.

Short press M to switch to the rain and fog ranging mode. Aim at target B, press the Power button. The device will continuously emit infrared laser and display readings on the upper line. Stop pressing the Power button; the final scan result is displayed on the upper line. The "long-range priority" result is displayed at the bottom of the LCD screen.

Rangefinder display showing a deer in foggy conditions with distance and angle readings. The display indicates 'Rain and Fog Ranging Mode'.
Figure 10: Rain and Fog Ranging Mode in action
Diagram illustrating Rain & Fog Ranging Mode with a deer target and linear distance measurement from point A to B.
Figure 11: Rain and Fog Ranging Mode Diagram

7.2. BOW Mode (HD) - Horizontal Distance

This mode is primarily used to measure the true horizontal distance from the rangefinder to the target object. It is suitable for bow hunting or other uses where bullet-drop/holdover information is not required.

Short press M to switch to BOW Mode (HD). Aim at point B of the measured object and short press the Power button. The linear distance (AB) from the target to the rangefinder will be displayed on the top. The horizontal distance and the tilt angle will be displayed at the bottom of the LCD screen.

Rangefinder display showing a deer in hunting mode with horizontal distance (HD) and angle readings.
Figure 12: BOW Mode (HD) in action
Diagram illustrating BOW Mode (HD) with a hunter in a tree stand, a deer target, and showing linear distance, horizontal distance, and angle.
Figure 13: BOW Mode (HD) Diagram

7.3. Auto Height Mode (VD) - Vertical Distance

Short press M to switch to Auto Height Mode. Aim at point B of the measured object and short press the Power button. The linear distance (AB) from the target to the rangefinder will be displayed on the top. The height distance and the tilt angle will be displayed at the bottom of the LCD screen.

User holding rangefinder in a forest, with the display showing vertical distance (VD) and angle readings for a tree.
Figure 14: Auto Height Mode (VD) in action

7.4. Vertical Height (Between two points)

Short press M to activate vertical height measuring mode. Aim at target B, press Power to get the distance and angle (between measured distance and horizontal surface) between A and B. Move to target C, press Power again to get the distance and angle between A and C. The vertical height between B and C will be displayed on the top, and the absolute value of the difference between the two angles will be displayed at the bottom.

7.5. Speed Measuring Mode

The angle "α" must be less than 10°; the smaller the angle, the higher the accuracy. Short press M to activate the speed measuring mode. Press Power, aim at target B, and move slightly. The speed of the target can be measured accordingly.

Speed measurement range: 18~300 km/h.

Rangefinder display showing a deer in hunting mode with horizontal distance (HD) and angle readings.
Figure 15: Speed Measuring Mode in action (visual representation of target tracking)

8. Specifications

Feature Specification
ModelPF210
Range800YD
Power3V, CR2*1
Measuring unitm / Yd
Accuracy±(0.5m+0.01D)
Laser wavelength905 nm
Eye safetyFDA(CFR 21)
Field of View7°
Magnification6X
Objective lens Diameter22mm
Eyepiece Lens Diameter16mm
Exit Pupil Diameter3.7mm
Diopter±0.5D
Diopter AdjustmentEyepiece adjustment
Operating temperature0°C~+40°C
Rain and fog ranging mode√
BOW Mode (HD)√
Auto Height Mode√
Vertical Height (Between two points)√
Speed measuring mode√
Display LCDTransflective LCD
Dimension110*65*38mm
Weight (without battery)164g

9. Maintenance

  • To protect the lens coating, do not touch the lens with your fingers.
  • The laser rangefinder has been precisely calibrated. Do not disassemble it yourself. If damaged, send it to a professional maintenance department for repair.
  • If the exposed glass lens is dirty, wipe it gently with a clean cloth. Do not use rough objects to wipe, to avoid damaging the optical glass surface.
  • Avoid collision or heavy loads during transport or use. Keep it away from excessive heat or corrosive substances.
  • During storage, pay attention to moisture resistance. Store the product in a dry, cool, and well-ventilated place to avoid direct sunlight, dust, and sudden temperature changes.
  • Rain and fog will affect the laser ray path, which may worsen measurement accuracy. In severe rain and fog, this can lead to deviations in the laser's trajectory and even measurement errors.

10. Troubleshooting

Common Issues and Solutions:

  • Device does not power on: Check if the battery is inserted correctly with the right polarity. Ensure the battery has sufficient charge; replace if necessary.
  • "---" displayed on screen: This indicates a weak target reflection or that the target is outside the measuring range. Try measuring a different target, ensure the target is within the specified range (3.3-800 yards), and that conditions are favorable (e.g., not too foggy or rainy for standard modes).
  • Inaccurate readings: Ensure the eyepiece is properly focused. Verify that you are using the correct measurement mode for the conditions (e.g., Rain and Fog mode for adverse weather). Environmental factors like heavy rain or dense fog can impact accuracy.
  • Display is dim or unclear: Adjust the eyepiece knob to focus. Ensure the lenses are clean. Check battery level.

11. User Tips

  • For best results, always ensure the target is clear and unobstructed.
  • Practice using different modes in various conditions to become familiar with the rangefinder's capabilities.
  • Keep the lenses clean with the provided cleaning cloth to maintain optical clarity and measurement accuracy.
  • When not in use, store the rangefinder in its protective carrying case to prevent damage.
  • Consider carrying a spare CR2 battery, especially for extended outdoor trips.

12. Warranty and Support

Warranty Information:

The product comes with a 30-Day return and refund guarantee, a 12-Month warranty, and lifetime technical support by MILESEEY.

You can register your product to extend the warranty to 2 years. Please refer to the original product packaging or seller's website for the QR code to register.

Contact Support:

For any concerns or technical support, please feel free to reach out to MILESEEY. They strive to reply within 24 hours.

This product is Made in China.

For more information on proper disposal and recycling of electrical and electronic equipment and batteries, please consult local regulations or visit www.quefairedemesdechets.fr (if applicable).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.