FEELWORLD FW568 PRO

Contents

FEELWORLD FW568 PRO 6" 4K HDMI Camera DSLR Monitor

User Manual

Foreword

Thank you for purchasing our 6-inch camera monitor. Please read this manual carefully before using the unit. Have a great experience!

Safety Cautions

  • Please avoid heavy impact and dropping the product onto the ground.
  • Do not cover the vents and holes on the enclosure. Do not place the machine on a bed, sofa, or rug to ensure good ventilation. This prevents overheating and extends service life.
  • The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
  • Keep the product away from heat sources such as radiators, water heaters, stoves, and other heating products.
  • Avoid prolonged exposure to direct sunlight, as this can damage the LCD screen.
  • To avoid damaging the product, do not disassemble or repair the unit yourself.
  • To maintain the LCD screen, follow these guidelines to prevent scratches, discoloration, and other damages:
    1. Refrain from using hard objects to hit the screen.
    2. Do not force to wipe the screen.
    3. Do not use chemical solutions to clean the screen.
    4. Do not spray any detergent on the screen.
    5. Do not write on the screen directly.
    6. Do not stick anything on the screen.
    7. Simply wipe with a clean soft cloth and ensure no water is on the screen.
  • To protect the plastic cover, follow these guidelines:
    1. Do not use chemical solutions to clean the cover.
    2. Keep away from volatile substances.
    3. Do not clean the case harshly.
    4. Simply wipe with a clean soft cloth and ensure no water on the cover.

Key Features

  • 6-inch 1920x1080 Full HD IPS screen
  • Super lightweight, ideal for gimbal use (weighing only 204g).
  • 1200nit high brightness, visible in sunlight.
  • Simple and intuitive button operation with three custom shortcut buttons (F1, F2, F3).
  • Custom 3D LUT support for previewing film looks.
  • Includes Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, and other auxiliary functions for accurate exposure and focus.
  • Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F battery slot.
  • Stereo Earphone output (3.5mm).
  • DC 8.4V power out to power your DSLR or mirrorless camera.
  • 4K HDMI Input and Output (V2.0, up to 4K@60Hz).
  • HDR Monitoring with HLG1, HLG2, HLG3 modes.
  • 9:16 Vertical Screen Marker, perfect for vertical video platforms.
  • Menu User Switch with 4 groups for saving settings.
  • Multiple 1/4" mounting points (bottom, right side).
  • Supports 12 languages.

Setup

Product Overview

FEELWORLD FW568 PRO 6 inch 4K HDMI Camera DSLR Monitor

Front view of the FW568 PRO monitor, highlighting its 6-inch display, 1200nit brightness, 1920x1080 resolution, HDMI 2.0, 9:16 marker, waveform, HDR, and 3D LUT features.

What's in the Box

FEELWORLD FW568 PRO Box Contents

Diagram showing the contents of the FW568 PRO package: 1x FW568 Pro Monitor, 1x HDMI Cable, 1x Micro HDMI Cable, 1x Sunshade, 1x Mini Hot Shoe Mount + Hex Wrench, 1x USB-A to USB-C Adapter, 1x Cable Management Tie, and 1x Manual.

Panel Layout

Front Panel

FW568 PRO Front Panel

The front panel of the monitor features the 6-inch IPS display.

Rear Panel

FW568 PRO Rear Panel with NP-F Battery Plate

The rear panel of the monitor, showing the NP-F battery plate for power.

Port Instruction (Bottom)

FW568 PRO Bottom Ports

The bottom of the monitor features a DC OUT 8.4V port, a 3.5mm earphone port, and a Type-C 5V input port. Also visible is a 1/4 inch screw thread for mounting.

  • DC OUT 8.4V: DC power output interface (5.5x2.1mm barrel plug), polarity as the output power (+ center, - outer). Used for powering cameras with a separately available DC coupler.
  • 3.5mm Earphone Port: For audio monitoring.
  • DC IN 5V (Type-C): Type-C power input. Recommended for local power supply only. Not for loop-out power to other devices. Also used for firmware updates and LUT file import.

Port Instruction (Left)

FW568 PRO Left Side Ports

The left side of the monitor, showing HDMI IN, HDMI OUT, and DC IN 12V ports.

  • HDMI IN: V2.0, HDMI signal input, up to 4K@60Hz.
  • HDMI OUT: V2.0, HDMI signal output, up to 4K@60Hz.
  • DC IN 12V: DC power input interface (5.5x2.1mm barrel plug), polarity as the input power (+ center, - outer).

Port Instruction (Right)

The right side of the monitor features a 1/4 inch screw thread for additional mounting options.

Power Supply Ways

  • NP-F Battery Plate: The rear panel is equipped with an NP-F battery plate, compatible with Sony NP-F series batteries (e.g., F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series). It is recommended to use standard original F970 batteries. Different battery specifications offer varying capabilities and working times. Remove the battery if the monitor is not used for a long time.
  • DC 12V IN: Use a 12V/1.5A power adapter with a 5.5x2.1mm barrel plug. Supports DC 7~24V input.
  • Type-C 5V Input: The bottom Type-C port can be connected to a power bank or mobile phone charger (suggest 5V/3A) for power supply. This port is not used for data transmission.

Sunshade Installation

FW568 PRO Sunshade Installation

Diagram illustrating the steps to attach the sunshade to the monitor.

  1. Attach the Velcro (hook side) to the outside of the sunshade frame of the monitor.
  2. Open the sunshade.
  3. Align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) on the monitor sunshade frame.
  4. Complete the sunshade installation.

Mounting Points

FW568 PRO Multiple Mounting Points

Image showing the 1/4 inch screw thread on the bottom of the monitor, allowing for various mounting configurations on cameras or rigs.

The monitor is equipped with two standard 1/4” mounting threads (bottom, right side), allowing easy attachment to cameras or other equipment using a magic arm, bracket, etc.

Mini Hot Shoe Mount Adapter

Mini Hot Shoe Mount Adapter Diagram

Diagram of the mini hot shoe mount adapter, showing its 180° viewing angle and 360° rotation capabilities.

The standard accessory mini hot shoe mount adapter allows quick release and attachment to camera monitors, LED lights, flashes, microphones, etc. It features an upper part with a 180° viewing angle and a base with 360° rotation.

Operating Instructions

Initial Power On

After correctly connecting to the power supply (red indicator), the monitor will automatically turn on. The indicator will turn yellow, and then green upon receiving an HDMI signal.

You can also set the power to 'Manually' in the System menu. If set to manual, you will need to long-press the EXIT/ button to turn on the monitor after plugging in the power supply.

Button Functions

FW568 PRO Top Buttons

Top view of the monitor showing the F1, F2, F3 custom buttons and MENU, V, ^, EXIT buttons.

ButtonFunction when OSD is not displayedFunction when OSD is displayed
F1Custom button F1/
F2Custom button F2/
F3Custom button F3/
MENUDisplay OSD Main menuReturn to previous OSD menu
VDecrease volume or backlightSelect next menu item; Decrease or adjust value of selected parameter
^Increase volume or backlightSelect previous menu item; Increase or adjust value of selected parameter
EXIT/Power On/Off button; Return/Exit Menu

Menu Navigation

  • When the menu is not displayed, directly press the "V" or "^" button to adjust the volume or backlight.
  • Press the MENU button to enter the OSD main menu. Use "V" or "^" to select options.
  • Press the MENU button again to enter a secondary menu. Use "V" or "^" to select items. After selection, press MENU to confirm and enter the function menu. Use "V" or "^" to select the corresponding function or adjust parameters. Press MENU to confirm finally.
  • Press the EXIT/ button to return or exit the menu.

Auxiliary Functions

Full Range of Auxiliary Functions Icons

Icons representing the full range of auxiliary functions available on the FW568 PRO monitor.

The FW568 PRO offers a comprehensive suite of auxiliary functions to assist with accurate monitoring during shooting. These include:

  • Waveform: Displays overall brightness of the image and checks evenness of lighting. Modes: RGB, YUV, Y. Position X/Y adjustable (0-100). Waves Trans.: Off, 25%, 50%, 75%.
  • Vector: Shows image saturation and color spectrum. Position X/Y adjustable (0-100).
  • RGB Histogram: Displays color tone distribution, exposure status, and overlapping histograms in red, green, and blue channels. Position X/Y adjustable (0-100).
  • Focus Assist (Peaking Filter): Highlights in-focus areas. Peaking Level adjustable (1-10).
  • Over Exposure (Zebras): Fills areas over a certain threshold with a striped pattern to highlight overexposed regions. Exposure Level adjustable (10-100).
  • Check Field: Quickly adjusts hue and saturation. Modes: Red, Green, Blue, Mono.
  • False Color: Depicts objects in colors that differ from a true color image, aiding exposure. Modes: Normal, ARRI.
  • Marker: Includes Grid (2x2 to 9x9, Custom), Safe Frames (Red, Green, Blue, Black, White, Gray), Center Marker (Red, Green, Blue, Black, White, Gray), Ratio Marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16).
  • Scan Mode: Under Scan, Over Scan.
  • Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
  • Anamorphic: Allows viewing unsqueezed images from anamorphic lenses. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X~2.00X).
  • Image Flip: H Flip, V Flip, H_V Flip.
  • Zoom Mode: Customizable (100%~200%) for high-quality close-ups.
  • Image Freeze: Freezes the current image.
  • Pixel-to-Pixel (P2P): Enables checking the image from the 1:1 signal source without scaling.
  • Embedded Audio: Displays audio level meters. Position X/Y adjustable (0-100).

User Options

  • LUT (Look Up Table): Supports built-in DE-log LUTs (SLOG2, SLOG3, LOGC, VLOG) and custom 3D-LUTs (.cube files, up to 32). Custom LUTs can be loaded via a USB flash drive connected to the Type-C port using the provided adapter.
  • HDR Monitoring: Activates High Dynamic Range display for greater luminosity and detail. Built-in HLG1, HLG2, HLG3 modes.
  • Menu User Switch: Save up to 4 groups of menu settings for quick recall.

Display Adjustment

  • Backlight: 0~100.
  • Brightness: 0~100.
  • Contrast: 0~100. Adjust carefully to maintain image hierarchy.
  • Saturation: 0~100.
  • Tint: 0~100.
  • Color Adjustment (Display Range): Auto, Limit, Full. Adjusts grayscale range (16-235 for Limited, 0-255 for Full) to prevent loss of detail in dark areas or a washed-out appearance.

System Settings

  • Color Temp.: 5600K, 6500K, 9300K, User (0~255 RGB adjustment).
  • Shortcut Key: Assign functions to F1, F2, F3 buttons.
  • Language: Supports Japanese, French, German, Italian, Spanish, Russian, English, Korean, Simplified Chinese, Traditional Chinese, Portuguese, Dutch.
  • OSD Time: Off, 15Sec, 30Sec, 45Sec.
  • OSD Trans: Off, 25%, 50%, 75% (adjusts OSD background transparency).
  • No Signal: Red, Green, Blue, Black, White, Gray (changes background color when no signal).
  • EDID Settings: 2.0, 1.4. Default is 2.0. If 1.4 is set manually, and a 4K60 signal is input, it needs to be set to 2.0 again.
  • Volume: 0~100.
  • Power On: Auto, Manual.
  • Reset: Resets all settings to factory defaults.
  • Firmware Update: Displays current firmware version and allows updates via USB flash drive (FAT32 format, .cube files).

How to Load LUT

The FW568 PRO supports loading custom 3D LUTs to preview different film looks. Here's how:

  1. USB Flash Drive Format: Ensure your USB flash drive is formatted to FAT32.
  2. File Requirements:
    • LUT file format suffix must be .cube.
    • Single file size should not exceed 7.9MB.
    • Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
    • LUT file names must be in English or Arabic numerals.
  3. Loading Steps:
    1. Make sure the USB flash drive is inserted into the Type-C to USB adapter, and then connect it to the monitor's Type-C interface.
    2. Enter the main menu, navigate to LUT > Lut Import, and click Confirm. The monitor will automatically detect the USB flash drive.
    3. If valid LUT files are found, the monitor will load them and display "[n] name", where [n] is the quantity number. If loading is successful, the screen will show "complete[n]". [n] stands for the quantity of LUT files (under 32).
  4. Clearing Imported LUTs: Insert an empty USB flash drive into the monitor, enter the main menu, navigate to LUT > Lut Import, and click Confirm. The imported LUTs will be cleared.

User Tips

  • Battery Management: For extended shooting sessions, consider using higher capacity NP-F batteries (e.g., NP-F970) or external power banks via the Type-C port. Always ensure batteries are fully charged before use.
  • Sunlight Visibility: The 1200nit brightness is excellent for outdoor use. Utilize the included sunshade to further reduce glare and improve visibility in bright conditions.
  • Custom Buttons: Program the F1, F2, F3 custom buttons with frequently used functions like Focus Assist, False Color, or Waveform for quick access during dynamic shooting.
  • LUTs for Creative Control: Experiment with custom 3D LUTs to achieve desired color grades and looks directly on set, saving time in post-production.
  • Audio Monitoring: Always use headphones with the 3.5mm jack to monitor audio quality, especially when recording critical sound.

Troubleshooting

Only Black and White or Monochrome Picture

  1. Check saturation, brightness, and contrast adjustments in the menu.
  2. Check if "Check Field" is enabled and set to a monochrome mode.

No Image After Power On

  1. Verify that the signal cable (HDMI) is securely connected.
  2. Ensure you are using the standard adapter for power. If using a battery, check if it is fully charged.

Earphone No Sound

Check if the Volume control is open. Press the volume up button (^) to increase the volume.

If you encounter any other problems, please contact our related technologists for assistance.

Specifications

FeatureSpecification
Panel Size6" IPS
Resolution1920x1080 pixels
Dot Pitch0.069 (H) × 0.069 (V) mm
Aspect Ratio16:9
Brightness1200cd/m²
Contrast1000:1
Viewing Angle80°/80°(L/R) 80°/80°(U/D)
BacklightLED
Signal InputHDMI 2.0
Signal OutputHDMI 2.0
Audio3.5mm Stereo Headphone
HDMI Support Format480i/576i/480p/576p
720p (60/59.94/50/30/29.97/25/24/23.98)
1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/23.98)
3840×2160p (60/50/30/29.97/25/24/23.98)
4096×2160p (60/50/30/29.97/25/24/23.98)
Power InDC IN 12V, Barrel (5.5mm outer, 2.1mm inner)
DC IN 5V (Type-C) - Note: please use more than 5V/2A Type-C power supply
Power OutDC OUT 8V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera)
Input VoltageDC: 7~24V
Power Consumption≤11W
Battery PlateNP-F Battery Plate
Install Way1/4-20 mount points (bottom, right)
Working Temperature0℃ ~ 50℃
Storage Temperature-10℃ ~ 60℃
Unit Size161x96x33.3(mm)
Unit Weight204g

Warranty and Support

FEELWORLD products are designed for reliability and performance. For warranty information and technical support, please refer to the official FEELWORLD website or contact your local distributor. Product features and performance are subject to improvement without prior notice.

You can view the original user manual PDF for more detailed information: User manual (PDF)

Product in Action

A video showcasing the FEELWORLD FW568 PRO monitor in various professional shooting environments, demonstrating its features and ease of use with different camera setups.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.