haozee Smart Soil Sensor

Contents

Smart Life Tuya WiFi Soil Sensor User Manual

Model: Smart Soil Sensor

1. Introduction

Thank you for choosing the Smart Life Tuya WiFi Soil Sensor. This device is designed to help you monitor the temperature and moisture levels of your plants' soil in real-time, both indoors and outdoors. With IP66 waterproofing and seamless integration with the Tuya Smart and Smart Life apps, you can ensure your plants receive optimal care. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting.

2. Specifications

Brand Namehaozee
Model NumberSmart Soil Sensor
Smart Home PlatformTuya
BatteryAA/LR6 1.5V * 2 (replaceable, batteries not included)
Wireless StandardIEEE 802.11b/g/n
Wireless Frequency2.4GHz
Wireless Distance45M
Bluetooth VersionBluetooth 5.0
Waterproof LevelIP66
Temperature Detection Range-10 ~ 60°C (14°F ~ 140°F)
Temperature Detection Accuracy0.5°C (Adjustable)
Humidity Detection Range0 ~ 100%RH (Non-Condensing)
Humidity Detection Accuracy1%RH (Adjustable)
Temp. and Hum. Detection Interval5min (Adjustable)
Operating Temperature-10 ~ 60°C (14 ~ 140°F)
Operating Humidity0 ~ 100%RH (Non-condensing)
Size47mm X 34mm X 208mm
Detailed specifications table for the Smart Life Tuya WiFi Soil Sensor
Figure 1: Product Specifications

3. Setup

3.1. Battery Installation

  1. Gently remove the top cover of the sensor.
  2. Insert 2 AA batteries into the battery compartment, ensuring correct polarity (+/-).
  3. When installing or replacing batteries, the interior of the device must be kept dry.
  4. Carefully align and replace the top cover, ensuring it is properly sealed to maintain waterproofing. If the battery is installed upside down, the device will not power on normally.
Diagram showing AA battery installation in the sensor
Figure 2: AA Battery Powered Sensor
Detailed view of sensor features including overhead battery compartment
Figure 3: Sensor Details (Overhead Battery Compartment)

3.2. App Download and Registration

  1. Download APP:
    • For Android devices, download the 'Smart Life' APP from Google Play.
    • For iOS devices, download the 'Smart Life' APP from the Apple App Store.
  2. Register and Login: Launch the Smart Life app, register a new account if you don't have one, and then log in.

3.3. Adding the Device (EZ-Pairing)

  1. Ensure your mobile device's Bluetooth is enabled and it is connected to a 2.4GHz Wi-Fi network.
  2. Open the Smart Life app.
  3. On the sensor, press the reset button (usually located on the side or top) for 5-10 seconds until the LED indicator flashes rapidly.
  4. In the Smart Life app, tap 'Add Device' or the '+' icon. The app should automatically discover the sensor via Bluetooth.
  5. If prompted, select the corresponding device type (e.g., 'Sensor' or 'Soil Sensor') and confirm the Wi-Fi network and password.
  6. Follow the on-screen instructions to complete the pairing process. Once successfully added, the device will appear in your app's device list.
Smart Control EZ-Pairing steps: Connect WiFi, Download App, Add Devices
Figure 4: EZ-Pairing Steps
Diagram showing Bluetooth pairing process between sensor, wireless router, and app
Figure 5: Bluetooth Pairing for Fast Response

3.4. Sensor Placement

  1. Insertion Depth:
    • For plants with shallow roots, insert the probe 1/2 to 2/3 of its length into the soil.
    • For plants with deep roots, insert the probe to 2/3 of its length into the soil.
  2. Insertion Method: Insert the probe vertically into the soil to prevent bending or breaking.
  3. Soil Condition: For best accuracy, it is recommended to water the soil until it is just moist before inserting the sensor. This ensures better conductivity and more accurate readings of the plant roots' moisture levels.
Smart Life Tuya WiFi Soil Sensor inserted in soil next to plants
Figure 6: Sensor in Soil

4. Operating

4.1. Main Interface and Data Monitoring

Once connected, open the Smart Life app to view the main interface for your soil sensor. Here you can see:

  • Current soil temperature.
  • Current soil moisture percentage.
  • Battery level of the sensor.
  • Device status (online/offline).
App remote control showing moisture and temperature readings on a smartphone
Figure 7: App Remote Control Interface

4.2. Plant List and Customization

The app allows you to manage a list of plants. You can:

  • Add new plants to your list.
  • Customize specific temperature and moisture settings for each plant type.
  • View plant images and remove plants from the list.

4.3. Historical Data Records

Access the 'Record' section in the app to view historical temperature and moisture data. You can analyze trends by hour and day, helping you understand your plants' needs over time.

4.4. Setting Parameters and Alerts

In the device settings, you can configure:

  • Temperature Limits: Set upper and lower thresholds for soil temperature.
  • Moisture Limits: Set upper and lower thresholds for soil moisture.
  • Detection Interval: Adjust how frequently the sensor takes readings (default is 5 minutes).
  • Low Battery Reminder: Receive notifications when the battery level is low.
  • High/Low Temperature/Moisture Alerts: Get push notifications if readings go outside your set parameters.
App showing accurate detection of soil temperature and moisture, with automation scene setting for sprinkler
Figure 8: Accurate Detection and Automation Example

4.5. Automation Scene Setting

Leverage the Smart Life app's automation features to create smart scenes:

  • Example: If soil moisture drops below 25%, you can set up an automation to turn on a smart sprinkler controller or drip irrigation system (requires compatible smart devices).
  • This allows for intelligent, automated plant care based on real-time soil conditions.
Automation Scene Setting showing integration with smart sprinkler controller, smart sprinkler meter, and smart drip irrigation
Figure 9: Automation Scene Setting with Irrigation Systems

4.6. Sharing Device

You can share control of your soil sensor with family members through the Smart Life app, allowing multiple users to monitor and manage your plants.

5. Maintenance

5.1. Battery Replacement

Refer to Section 3.1 for detailed instructions on how to replace the batteries. Always ensure the interior of the device remains dry during battery changes and that the cover is securely sealed afterward.

5.2. Cleaning the Probe

Periodically clean the sensor probe with a soft, damp cloth to remove any soil buildup or debris. This helps maintain accurate readings and prolongs the life of the sensor. Avoid using abrasive cleaners or harsh chemicals.

6. Troubleshooting

6.1. Frequently Asked Questions (FAQ)

  • Q: Can I detect soil data without the app?
    A: No, the device uploads all soil data to the Smart Life app. Each detection cycle is approximately 5 minutes.
  • Q: What do high/low moisture values indicate?
    A: The device will trigger an alarm if moisture levels are too high or too low based on your set thresholds. Note that dry soil may not reach 100% moisture, and the data should be used as a reference.
  • Q: What should I pay attention to when using the device?
    A: Ensure the device is installed vertically, keep the probe clean, ensure the battery compartment is sealed, and avoid frequent changes in insertion depth.
  • Q: Why does the data change significantly or seem inaccurate?
    A: Soil conductivity changes with water content, which can affect accuracy. Ensure proper watering and stable soil conditions. If the probe is not fully inserted or is in very dry/compacted soil, readings may be inconsistent.

6.2. User Tips

  • Inaccurate or Stuck Readings: If the humidity reading appears stuck or inaccurate (e.g., constantly showing the same percentage even after watering or drying), ensure the sensor probe is fully inserted into moist soil and has good contact. Allow some time (up to 30 minutes) for the sensor to stabilize and reflect changes after watering. If issues persist, check battery levels, clean the probe, or try re-pairing the device with the app.
  • Optimal Placement: For best results, place the sensor in an area representative of the plant's root zone, avoiding direct sunlight on the sensor body itself if possible, as this can affect temperature readings.

7. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 haozee. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.