1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO ZA-120, ZA-240, and ZA-360 ARGB case fans. Please read this manual thoroughly before installation and keep it for future reference.
Video: JONSBO ZA/ZB ARGB Infinity Mirror Series Fan Overview and Features
The JONSBO ZA series fans feature an aluminum CD patterned shaft, paired with non-luminous fan blades, offering a sleek design. The ZB series fans are equipped with a luminous thousand-layer mirror axis and luminous fan blades for enhanced lighting effects. Both series support 3-pin 5V ARGB iridescent light effects, which can be synchronously controlled through motherboard software.
Image: JONSBO ZA/ZB ARGB Infinity Mirror Series Fans highlighting key features like four-sided mirror light effect, easy installation, single-line connection, and aluminum nameplate.
2. Safety Information & Restrictions
WARNING
- ELECTRICAL HAZARD: Always disconnect the main power before installation to prevent electric shock.
- MOVING PARTS HAZARD: Keep hands, loose clothing, and cables clear of fan blades during operation.
- RGB VOLTAGE WARNING (For ZA-360): IMPORTANT: This fan kit uses a 5V Addressable RGB (3-pin) standard. NEVER connect its RGB cable to a traditional 12V RGB (4-pin) header. Incorrect connection will cause permanent failure of the LEDs and may create a safety risk.
- DAMAGED PRODUCT: Do not operate the fan if it is physically damaged, makes abnormal noises, or emits smoke. Disconnect power immediately and contact support.
- SMALL PARTS: Choking hazard. Keep out of reach of young children.
Installation should be performed by individuals with basic PC hardware knowledge. If unsure, consult a professional.
Use Restrictions:
- This product is designed exclusively for internal use within standard computer cases.
- Do not use in environments with high humidity, excessive dust, liquids, or corrosive substances.
- Do not block the air intake or exhaust vents of the fan.
- Do not insert any objects into the fan while it is spinning.
- Do not attempt to disassemble or repair the fan. This voids the warranty.
3. Package Contents
The package contents vary depending on the model purchased (single fan or 3-fan kit). Please verify your package against the product description at the time of purchase.
Typical contents may include:
- JONSBO ZA-120/240/360 ARGB Case Fan(s)
- Standard mounting screws
- Longer screws (for radiator/heatsink mounting)
- Daisy-chain cables (for 3-fan kit)
- RGB controller (for 3-fan kit)
- SATA power cable (for RGB controller, if included)
4. Installation
4.1. Airflow Direction
Identify the airflow direction by locating the directional arrows on the fan frame. Air typically flows from the front side (with the open frame and supporting struts) to the rear side (with the motor hub and label).
Image: Diagram illustrating air outlet (inlet surface) and inlet (air outlet surface) with nine cooling blades, indicating airflow direction.
4.2. Mount the Fan
- For Case Mounting: Align the fan with the case's fan mounting holes. Secure it using the provided standard screws.
- For Radiator/Heatsink Mounting: Use the provided longer screws to attach the fan through the radiator fins.
- For the ZA-360 3-Fan Kit: You may connect multiple fans together via daisy-chain cables (if included) before mounting them as a unit.
4.3. Connect Cables
Image: Illustration of simplified wiring, showing a single line connection to the motherboard for seamless connectivity.
- Power & Speed Control (PWM): Connect the fan's 4-pin PWM connector to a corresponding SYS_FAN or CPU_FAN header on your motherboard. For the ZA-360 kit, you may connect the combined PWM cable from the fans to the included controller or directly to a motherboard header.
- RGB Lighting (ZA-360 Kit ONLY): Connect the 3-pin 5V Addressable RGB (ARGB) cable to a compatible 5V ADD_RGB header on your motherboard OR to the included RGB controller. CRITICAL: Ensure voltage compatibility. Connecting to a 12V RGB header will permanently damage the LEDs.
- Controller Power (ZA-360 Kit): If using the included controller, connect its SATA power cable to a SATA power connector from your power supply.
4.4. Final Check & Power On
Ensure all connections are secure and cables are routed away from fan blades and other components. Reconnect the main power and start your system.
5. Operating Instructions
5.1. ARGB Lighting Synchronization
The JONSBO ZA/ZB series fans support ARGB lighting effects that can be synchronized with your motherboard's software. Ensure your motherboard has a compatible 3-pin 5V optical control interface.
Image: ARGB Colorful synchronous light effect, showing compatibility with various motherboard RGB software (ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome Sync, Gigabyte RGB Fusion).
5.2. Guide to Using Illusionary Light Effect
To customize the lighting effects:
- Live streaming motherboard with 3PIN ARGB pins, synchronized with over 16 million color effects.
- 5V ARGB plug male and female design, can be connected in series with other light efficiency devices.
Image: Screenshot of a motherboard RGB software interface, demonstrating how to adjust lighting effects.
5.3. Fan Speed Control
Use your motherboard software or the included controller (for ZA-360 kit) to adjust fan speeds and lighting effects.
6. Maintenance
To ensure optimal performance and longevity of your JONSBO case fans, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a soft brush or compressed air. Ensure the system is powered off and unplugged before cleaning.
- Inspect Cables: Regularly check all connected cables for any signs of wear, fraying, or loose connections.
- Avoid Obstructions: Ensure no objects are obstructing the fan's rotation or airflow paths.
7. Troubleshooting
- Fan Not Spinning:
- Check if the 4-pin PWM connector is securely connected to the motherboard's fan header.
- Ensure the system is powered on and the fan header is receiving power.
- If using the ZA-360 kit controller, ensure its SATA power cable is connected to the PSU.
- RGB Lights Not Working/Incorrect Colors:
- Verify the 3-pin 5V ARGB cable is correctly connected to a compatible 5V ADD_RGB header on the motherboard or the RGB controller.
- CRITICAL: Ensure it is NOT connected to a 12V RGB header, as this will cause permanent damage.
- Check your motherboard's RGB software settings to ensure the lighting effects are enabled and configured correctly.
- If using the ZA-360 kit controller, ensure it is powered and configured correctly.
- Excessive Noise:
- Check for any cables or obstructions hitting the fan blades.
- Ensure the fan is securely mounted and not vibrating against the case.
- Clean any dust buildup on the fan blades.
- If the fan makes abnormal noises, disconnect power and contact support.
8. Specifications
The JONSBO ZA series fans are available in various configurations. Below are the detailed specifications:
Image: Overview of available fan versions including ZA-360B (Forward), ZA-360BR (Reverse), ZA-240B (Forward), ZA-240BR (Reverse), ZA-120B (Forward), and ZA-120BR (Reverse).
Image: Detailed specifications for Noise, RPM speed, and Airflow (CFM) for both Forward and Reverse fan blade versions.
Image: Comprehensive specification tables for ZA-120, ZA-240, and ZA-360 models (B and BR editions), including fan size, speed, air volume, wind pressure, noise, rated voltage, rated current, power waste, fan bearings, life expectancy, and interface.
| Attribute | Value |
|---|---|
| Model Number | ZA-120/240/360 |
| Voltage | 12V (Fan), 5V (LED) |
| Used For | Case |
| Package | Yes |
| Blade Quantity | 9 |
| Bearing Type | Hydraulic Bearings |
| Fan Size | 120mm x 120mm x 25mm (ZA-120), 242mm x 123mm x 28mm (ZA-240), 362mm x 123mm x 28mm (ZA-360) |
| Interface | PWM 4PIN, ARGB 3PIN |
9. User Tips
Based on user feedback, here are some helpful tips for your JONSBO ARGB Case Fans:
- Aesthetics: Users frequently praise the attractive design and lighting effects of these fans, noting they look great in PC builds.
- Performance: The fans are reported to offer good performance, providing effective cooling for computer cases.
- Quality: Many users highlight the well-made construction and overall quality of the product.
- Packaging: The product packaging is often described as luxurious and protective, ensuring items arrive in good condition.
10. Compliance Markings & Standards
This product bears the CE mark, indicating conformity with applicable European Union directives.
Applicable Regulations & Harmonized Standards:
This product complies with the essential requirements of the relevant European Union Directives and harmonized standards, including:
- Directive 2014/35/EU (Low Voltage Directive)
- Directive 2014/30/EU (Electromagnetic Compatibility Directive)
- Directive 2011/65/EU & Delegated Directive (EU) 2015/863 (Restriction of Hazardous Substances - RoHS)
- Harmonized Standard: EN 62368-1:2014 + A11:2017 (Audio/video, information and communication technology equipment - Safety requirements)
11. Warranty & Support
For technical support and warranty service, please visit the official JONSBO website or contact your authorized retailer.
A user manual in PDF format is available for download: JONSBO ZA Series User Manual (PDF)