HUANANZHI X99-F8D PLUS

Contents

HUANANZHI X99 F8D PLUS Motherboard User Manual

Model: X99-F8D PLUS

Brand: HUANANZHI

1. Introduction and Safety Precautions

This manual provides detailed instructions for the installation, setup, and operation of your HUANANZHI X99 F8D PLUS Motherboard. Please read this manual thoroughly before proceeding with any installation or configuration to ensure proper functionality and to prevent damage to the components.

1.1 Safety Precautions

  • Products could probably be damaged due to electrostatic discharge (ESD). Please follow these steps below for a successful computer assembly.
  • Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
  • In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
  • Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
  • Please put the motherboard in an anti-static container or on anti-static pad if not needed.
  • Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
  • Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
  • Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
  • Keep the motherboard away from moisture.
  • Keep the user manual for future reference.
  • Before plugging the power supply, please make sure the socket provides the corresponding voltage.
  • In any of the following situations, have the board checked by a service technician: Liquid penetrated into the computer, Motherboard is exposed to moisture, Motherboard does not work even if you follow the instructions on user manual, Motherboard fell off to the ground and got damaged, Motherboard has clear signs of damage.

2. Package Contents

Please confirm the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact customer service as soon as possible.

  • 1 x HUANANZHI X99-F8D V1.2 DUAL Motherboard
  • 2 x SATA data cables
  • 1 x I/O shield back plate
  • 1 x Warranty Card
HUANANZHI X99 F8D PLUS Motherboard in its retail box.
HUANANZHI X99 F8D PLUS Motherboard in its retail box.

3. Specifications

The HUANANZHI X99 F8D PLUS Motherboard offers robust features for high-performance computing needs.

FeatureSpecification
ModelX99-F8D PLUS
CPU SocketLGA 2011-3 (Supports Intel Xeon E Series, E5 26XX V3/V4 Processors)
Main ChipsetIntel C612 series
Memory Slots8 x DDR4 (Four Channel Operation)
Memory Type SupportedDDR4 1866/2133/2400MHz (Non-ECC, ECC memory)
Maximum RAM Capacity512GB (8*64G)
SATA Interface6 x SATA 3.0 6Gb/s, 4 x SSATA 3.0 6Gb/s
M.2 Slots2 x M.2 22110 NVME PCIe x4 3.0 (32Gb/s), 1 x M.2 2280 NVME PCIe x4 2.0 @ NGFF SSATA 3.0 6GB/S (one SSATA signal will be used)
PCIe Expansion Slots3 x PCI Express 3.0 x16, 3 x PCI Express 3.0 x8
Onboard LAN2 x Realtek RTL8125BG 2.5Gbps Gigabit Ethernet
AudioRealtek 7.1 Surround Sound High Definition Audio Codec
Rear I/O Ports4 x USB 2.0, 4 x USB 3.0, 2 x RJ45 (2.5G LAN), 6 x 3.5mm Audio Jacks
Onboard Connectors & Headers24-pin Main Power, 2 x 8-pin CPU Power, CPU Fan, Chassis(SYS) Fan, 1 x 9-pin USB 2.0, 1 x 19-pin USB 3.0, 1 x Front Audio Output, Power/Reset buttons, Digital Diagnostic Card
Form FactorE-ATX (300*320MM)
PCB Layers12-layer PCB
Power Supply Phases8+8-phase power supply
Detailed specifications table for HUANANZHI X99 F8D PLUS Motherboard.
Detailed specifications table for HUANANZHI X99 F8D PLUS Motherboard.
Overview of HUANANZHI X99 F8D PLUS Motherboard features including PCB layers, DDR4 slots, NIC, power supply, PCIe, C612 chipset, and I/O.
Overview of HUANANZHI X99 F8D PLUS Motherboard features including PCB layers, DDR4 slots, NIC, power supply, PCIe, C612 chipset, and I/O.
Motherboard dimensions (330mm x 305mm) and I/O interface diagram showing USB, LAN, and audio ports.
Motherboard dimensions (330mm x 305mm) and I/O interface diagram showing USB, LAN, and audio ports.

4. Motherboard Layout

This section provides an overview of the motherboard's components and their locations.

Top-down view of the HUANANZHI X99 F8D PLUS Motherboard showing all major components.
Top-down view of the HUANANZHI X99 F8D PLUS Motherboard showing all major components.

4.1 Rear I/O Panel

The rear I/O panel provides various ports for connecting external devices.

Diagram of the rear I/O panel with labels for USB 3.0, USB 2.0, 2.5G NIC, and Audio Ports.
Diagram of the rear I/O panel with labels for USB 3.0, USB 2.0, 2.5G NIC, and Audio Ports.

LAN Port Status Table

StatusDescription
Turn OffNetwork Not Connected / Transmission rate 10 Mbps
YellowNetwork Connected
GreenTransmission rate 100 Mbps
Flicker / OrangeNetwork In Use / Transmission rate 1 Gbps

Audio Port Configuration

Audio PortAisle
2468
Audio Input●
Audio output/Front speaker output●
Rear speaker output●
Center/subwoofer output●
Microphone input●
Side speaker output●

4.2 Onboard Connectors & Headers

The motherboard features various internal connectors for system components.

Close-up of Power Button, Reset Button, and Digital DEBUG Display on the motherboard.
Power Button, Reset Button, and Digital DEBUG Display on the motherboard.
Close-up of SATA 3.0 and SSATA 3.0 ports on the motherboard.
SATA 3.0 and SSATA 3.0 ports for storage connections.
Close-up of M.2 NVME slots on the motherboard.
M.2 NVME slots for high-speed storage.
Close-up of PCIe X16 and PCIe X8 slots on the motherboard.
PCIe X16 and PCIe X8 slots for expansion cards.

5. Installation and Setup

Follow these steps carefully to install your motherboard components.

5.1 CPU Installation

  1. To properly place the CPU, align the two pairs of starting points and the golden triangle on the LGA2011-3 CPU with the corresponding indicators on the motherboard (golden triangle indicates Pin1).
  2. Remove the screw from the screw base.
  3. Remove the screw base.
Diagram showing CPU installation steps.
CPU Installation Diagram.

5.2 Memory Installation

  1. Pull the clips on both ends of the memory slot outward.
  2. Align the memory module with the protruding position of the slot to determine the correct installation direction.
  3. Insert the memory module into the slot and press down firmly until the snaps on both ends automatically close.
Diagram showing memory installation steps.
Memory Installation Diagram.

5.3 M.2 Interface Installation

  1. Tighten the screw into the M.2 module's length distance hole.
  2. Insert your M.2 module into the M.2 interface at a 30-degree angle.
  3. Place the screw on the trailing edge notch of your M.2 module and tighten it to the screw base.
Diagram showing M.2 SSD installation steps.
M.2 Interface Installation Diagram.

5.4 Graphics Card Installation

  1. Use a screwdriver to remove the bezel and screws on the main unit.
  2. When installing the graphics card, you need to push down the card slot's clip.
  3. Insert the graphics card into the graphics card slot.
  4. After installation, the clip will automatically return to its position.
  5. Secure the graphics card to the chassis with screws.
  6. Install the power cord.
Diagram showing graphics card installation steps.
Graphics Card Installation Diagram.

5.5 Front Panel Connectors

Carefully connect the front panel cables to the corresponding headers on the motherboard. Refer to the diagrams below for pin assignments.

F_PANEL1 Boot Interface

PinDescriptionPinDescription
1Power LED+2HDD LED+
3Power LED-4HDD LED-
5Power SW6Reset SW
7Power SW8Reset SW
9KEY10N.C

USB 3.0 Interface

PinDescriptionPinDescription
1Power2USB3_RX_DN
3USB3_RX_DP4Ground
5USB3_TX_C_DN6USB3_TX_C_DP
7Ground8USB2.0-
9USB2.0+10GND
11USB2.0+12USB2.0-
13Ground14USB3_TX_C_DP
15USB3_TX_C_DN16Ground
17USB3_RX_DP18USB3_RX_DN
19Power20N.C

Front Audio Output Ports

PinDescriptionPinDescription
1MIC+2Ground
3Vbias4AuD_Vcc(AVCC)
5L_R_Out (Right Channel Output)6R_Out Back (Right Channel Output Return)
7N.C (Not Connected)8KEY
9L_L_Out (Left Channel Output)10L_Out Back (Left Channel Output Return)

USB Extension Interface

PinDescriptionPinDescription
1VCC (Power Positive)2VCC (Power Negative)
3D- (Data Negative Signal)4D- (Data Negative Signal)
5D+ (Data Positive Signal)6D+ (Data Positive Signal)
7GND (Ground)8GND (Ground)
9N.C (Not Connected)10KEY

6. Driver Installation

After hardware installation, you need to install the necessary drivers for your operating system.

6.1 Driver Directory Overview

Driver DirectoryDriver DescriptionOperating System
X99-F8D PLUS Chipset DriverIntel chip information installationwin7/win10/win11
X99-F8D PLUS Sound Card DriverRealtek series sound card driver installationwin7/win10/win11
X99-F8D PLUS LAN DriverRealtek network card driver installationwin7/win10/win11

6.2 Intel Chip Information Installation

Run "Control Panel - System - Hardware - Device Manager". Click the right mouse button to change the driver's hardware device and proceed with the installation below:

  1. Option: Property - Update driver - Not connect to Internet - Manually installation.
  2. Find the corresponding directory.
  3. Select "Next step".

6.3 Audio Driver Installation (Example: HD Audio series)

Before this installation, please check the model of the audio chip on the motherboard first (you may refer to this manual), Select the proper driver accordingly for installation.

  1. Run "driver installer": /X99-F8D PLUS SOUND CARD DRIVER /VISTA-WIN7-R267, take WDW-267 if OS is XP.
  2. Click on "next" to continue, and then "finished".
  3. The system will automatically restart itself to finish the installation.

6.4 Uninstallation of Audio Driver (Example: HD Audio series)

Entering into Windows desktop, choose "setting" / "control", and then "add/remove programs". Later, choose "Realtek High Definition Audio Driver" in the menu and click on "add/remove" so that the driver will be automatically removed.

6.5 Driver Installation of External Video Card

  1. Run "driver installer", take Setup.exe.
  2. Click on "next" - "yes" - "next".

6.6 Network Driver Installation

  1. Run "driver installer": X99-F8D LAN DRIVER/WIN7 XP.
  2. Click on "next" - "installation" - "finished" and restart the computer.
  3. The system will automatically search for devices to complete the installation.

7. BIOS Settings

The BIOS (Basic Input/Output System) is firmware that initializes and tests hardware components and loads the operating system. To enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, the motherboard's battery supplies power to CMOS SRAM. When the computer is turned on and starts POST (Power On Self Test), press the "Delete/Del" key to enter into the AMI BIOS CMOS SETUP main page. The motherboard warm boot key is "F11", and the save key is "F10".

7.1 Main Menu Function

Please pay attention to every option in the settings menu. When there is a triangle-shaped symbol on the left side of a menu item, it means that you choose this sub-menu, so a pop-up sub-menu will be available.

  • Main: System Overview (Date/Time settings, HDD specs/Monitor type settings).
  • Advanced: Advanced Settings (BIOS special function settings, such as virus alert, booting disk priority etc.).
  • Chipset: Advanced Chipset Settings.
  • Boot: Boot Settings (Boot device priority).
  • Security: Security Settings (BIOS password settings).
  • Save: Save Setting.
  • Exit: Exit Options (loading of optimized defaults value/loading of fail-safe defaults/discarding changes/exiting without saving).

8. Operating the Motherboard

Once all components are installed and drivers are set up, your system should be ready for operation. Ensure all power connections are secure before powering on.

8.1 Clearing CMOS

If you encounter issues after making BIOS changes, you may need to clear the CMOS. Locate the CLR-CMOS jumper on the motherboard and follow the instructions in your system's manual to reset BIOS settings to default.

9. Maintenance

Proper maintenance ensures the longevity and stable performance of your motherboard.

  • Keep Clean: Regularly clean dust from the motherboard and components using compressed air. Dust can impede cooling and cause short circuits.
  • Ensure Proper Cooling: Verify that all fans (CPU, chassis) are functioning correctly and that there is adequate airflow within the computer case. The motherboard features Dual MOS Cooling Fans and Large Size Alloy Heat Sinks to help reduce CPU temperature and ensure stable operation.
  • Avoid Moisture: Keep the motherboard away from humid environments to prevent corrosion and electrical damage.
  • Check Connections: Periodically check all cable connections (power, data, expansion cards) to ensure they are secure.
Dual MOS Cooling Fans on the motherboard.
Dual MOS Cooling Fans effectively reduce CPU temperature by 20-30 degrees.
Large Size Alloy Heat Sink on the motherboard.
Large Size Alloy Heat Sink for efficient heat dissipation and stable operation.

10. Troubleshooting

If you encounter issues with your motherboard, consider the following troubleshooting steps:

  • No Power/No Boot: Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected. Check the power supply unit (PSU) for proper function.
  • Digital DEBUG Display: The motherboard is equipped with a Digital DEBUG Display. Users can quickly diagnose problems according to the corresponding display code. Refer to your system's POST code guide for specific error meanings.
  • Component Recognition Issues: Verify that all components (CPU, RAM, GPU, M.2 SSDs, SATA drives) are correctly seated and securely connected. Loose connections can prevent components from being recognized.
  • Driver Problems: If a device is not functioning correctly, ensure the latest drivers are installed. Refer to the 'Driver Installation' section for guidance.
  • BIOS Issues: If system instability or incorrect settings occur, try resetting the BIOS to default settings by clearing the CMOS.
  • Incompatibility: Due to the wide variety of computer accessories, some components (e.g., specific brands or ES/QS versions of CPU, RAM, M.2 SSDs) may be incompatible. If you suspect incompatibility, confirm with customer service before purchase.
Digital DEBUG Display on the motherboard for troubleshooting.
Digital DEBUG Display for quick problem diagnosis.

11. User Tips

  • Adequate Power Supply: This platform requires a powerful power supply. Ensure your PSU is sufficient to support all components, with at least a 500W power supply recommended.
  • Component Compatibility: Before purchasing, confirm compatibility of other components (CPU, RAM, M.2 SSDs) with the motherboard, especially if using less common brands or engineering samples (ES/QS) to avoid incompatibility issues.
  • BIOS Updates: Keep your BIOS updated to the latest version to ensure optimal performance and compatibility with new hardware.
  • Cable Management: Good cable management improves airflow and makes future maintenance easier.

12. Warranty and Support

Your HUANANZHI X99 F8D PLUS Motherboard comes with a warranty as detailed on the included Warranty Card. Please retain your proof of purchase for warranty claims.

If you need any assistance during installation or encounter any issues, please contact HUANANZHI after-sales customer service. You can reach them via official E-mail: business@huananzhi.com for professional technical support.

For more information about HUANANZHI, visit www.huananzhi.com.

HUANANZHI Brand Introduction and Certifications (ISO 9001, RoHS, CE, FCC).
HUANANZHI Brand Introduction and Certifications (ISO 9001, RoHS, CE, FCC).

13. Product Overview Video

Watch this video for a visual overview of the HUANANZHI X99 F8D PLUS Motherboard and its features.

Product overview video showcasing the HUANANZHI X99 F8D PLUS Motherboard.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.