Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Leeocar Android Multimedia Player designed specifically for Toyota Corolla models from 2014 to 2016. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Package Contents
Please verify that all items listed below are included in your package. If any accessories are missing, please contact customer service.
- Main power harness
- Installation Guide
- Crowbar
- Microphone
- 10-pin reverse camera input cable
- RCA Cable
- 4-pin USB cable (x2)
- Dash kit
- Canbus Box (if applicable)
- 6-pin USB cable
- Backup Camera
- GPS Antenna
Warning: The CANBUS box has been connected to the wiring harness before shipment. Do not disconnect the CANBUS connector, as functions may be disabled.

Image: Overview of package contents, wiring diagrams, and installation steps.
Installation Guide
Important Safety Notes
Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the battery before installation.
Radio Wiring Diagram
Refer to the diagram below for connecting the main power harness, USB cables, microphone, and other accessories.
- Microphone Cable: Connect to the dedicated microphone input.
- CANBUS: Pre-connected to the wiring harness.
- 4-pin USB cable: For USB devices.
- Power Cable: Main power connection.
- RCA Cable: For audio/video inputs/outputs.
- 6-pin USB cable: For additional USB devices.
- GPS Antenna: Connect to the GPS port.
- Radio Antenna: Connect to the radio antenna port.
- Reversing Cable: For backup camera input.
Radio Rear Panel Pinout Diagram
This diagram details the connections on the rear panel of the radio unit.
| Pin | Function | Pin | Function |
|---|---|---|---|
| A1 | Chassis Ground | A9 | AUX CVBS |
| A2 | Front Left Speaker + | A10 | GND (MIC) |
| A3 | Accessory/Ignition | A11 | CVBS GND |
| A4 | Front Left Speaker - | A12 | PARK DET |
| A5 | Rear Left Speaker + | A13 | AUX IN L |
| A6 | Rear Left Speaker - | A14 | AUX IN R |
| A7 | Steering Wheel Control 1 | A15 | CAN TX |
| A8 | Steering Wheel Control 2 | A16 | CAN RX |
Wiring Harness Connection Tutorial
Only connect the labeled factory plugs. The remaining plugs do not need to be connected.
- Main Power Harness (XC-1115): Connect to the corresponding port on the radio.
- Factory USB Adapter Cable: We recommend using the 4-pin USB cable we provide for better performance. Connect to 8-pin port C.
- Factory Backup Camera: Identify the appropriate connector for the factory backup camera and connect it to the female connector on the 10-pin Reversing Cable.
- RCA Cable Connections:
- I: VIDEO OUT (Non-functional)
- II: CVBS-IN-1
- III: AUX IN L
- IV: AUX IN R
- V: SUB
- VI: AUDIO OUT R
- VII: AUDIO OUT L
- VIII: Mic Cable
Steering Wheel Controls Setup Tutorial
For XC-337 Harness: Go to Car Settings → Factory (password: 000000) → CarType Setting, select "NO Canbus". Then go to Car Settings → General → SWC Type, and select "Learning Type". Tap "Enter SWC setting interface" and follow on-screen instructions to program your steering wheel control (SWC) keys.
For XC-1115 Harness: Go to Car Settings → Factory (password: 000000) → CarType Setting, and select "Raise --Toyota/Lexus--Corolla--2019 COROLLA (TW) (COROLLA_R04)".

Image: Screenshot of the Steering Wheel Control setup interface.
Rear Camera Wiring Tutorial
Connect the yellow RCA video cable from the rear camera to the "CAM IN" port on the radio. Connect the red power wire from the camera to the reverse light power source, and the black ground wire to chassis ground. The small red wire on the video cable should be connected to the reverse trigger wire on the radio harness.

Image: Diagram showing how to connect the rear camera.
Dash Kit Installation
If some internal brackets interfere with the installation and prevent the dash kit from fitting correctly, cut off all interfering brackets as required. Secure the rear mounting brackets of the dash kit to complete the installation. This modification will not affect the fit, stability, or normal use.
Operating Instructions
GPS Navigation
The unit features built-in offline maps (North America) and supports online navigation apps. Install the GPS antenna on the A-pillar or outside the dash for optimal signal. For online navigation, connect to Wi-Fi or a hotspot. For offline navigation, download maps to the radio's internal storage via Wi-Fi first.

Image: Display showing GPS navigation with map and icons for various apps, alongside 5G WiFi connection details.
Wireless Connectivity (WiFi & Bluetooth)
The unit supports 5G WiFi for internet access, allowing you to download apps and online maps. Bluetooth enables hands-free calling and audio streaming.

Image: Interface showing an active Bluetooth call and icons indicating steering wheel controls for phone calls and music.
CarPlay, Android Auto, and Mirror Link
Enjoy seamless integration with your smartphone via Wireless/Wired CarPlay, Android Auto, and Mirror Link. These features support connection via Bluetooth and USB.

Image: Before and after installation view in a Toyota Corolla, highlighting CarPlay, Android Auto, and Mirror Link functionalities with phone examples.
Connecting Wireless CarPlay via Zlink
- Turn on Wi-Fi and Bluetooth on your phone.
- On the radio, open the Bluetooth Phone app and find the corresponding Bluetooth device name. The PIN code is 0000.
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
- For iPhone: Tap Use CarPlay when prompted, and set the device type as Car Stereo.
- For Android: Make sure Location is turned on and your phone supports wireless Android Auto (Android 11 or above is recommended).
- Open the ZLINK app on the car radio. CarPlay or Android Auto should launch automatically.
Connecting Mirroring Feature via Zlink (iOS)
Wireless Mirroring:
- Open the ZLINK app on the car stereo and select "Wireless Mirroring."
- Enable your phone's cellular data and personal hotspot, and allow others to join.
- Connect the car stereo's WiFi to the personal hotspot.
- Swipe down from the top of your phone screen to access the control center, tap "Screen Mirroring," and select "zj-airplay" to pair and complete the wireless mirroring connection.
Wired Mirroring:
- Open the "Zlink" app and switch to mirror function.
- Using the included 4-pin/6-pin USB cable, connect the USB cable to your phone to establish a connection, and follow the on-screen instructions.
Connecting Mirroring Feature via Zlink (Android)
Wireless Mirroring:
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
- Open the ZLINK app on the radio and select "Wireless Mirroring."
- Scan the QR code to download the 'zPlus' app.
- Enable your phone's hotspot and connect the radio's WiFi to the phone hotspot.
- Open the "zPlus" app on your phone, select the connection method - Wireless Connection to start mirroring and screen casting.
Wired Mirroring:
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
- Open the ZLINK app on the radio and switch to wired mirroring mode.
- Use the 4Pin/6Pin USB cable provided to connect the USB data cable to your phone.
- Open the "zPlus" app on your phone and select the connection method - USB Connection to establish the connection. The "zPlus" app should launch automatically.
Audio Settings
The unit features a built-in EQ setting for sound customization and supports FM/RDS radio for your favorite stations.

Image: Screenshots of the built-in equalizer settings and the FM/RDS radio interface.
Voice Control
The system supports AI voice control, allowing you to make calls, navigate, and play music using voice commands. The voice assistant can only be activated through your phone once connected via Bluetooth, Android Auto, or CarPlay.

Image: Examples of voice commands like "Hey Siri, turn on the music" and "OK, open the map."
Display and Rear Camera
The unit features a 10-inch HD 1280*800 OLED screen with 1080P video playback and a 2.5D touch screen. It also supports a 1080P rear camera with high definition, 170° wide angle, waterproof design, and night vision capabilities.

Image: Display highlighting 10-inch HD, 1080P resolution, and 2.5D screen with clear image quality.

Image: Display showcasing 1080P rear camera features including HD, 170° wide angle, waterproof, and night vision.
Customizing Boot Logo
To change the custom boot logo/startup logo:
- Download the desired image (resolution 1280x720, PNG format), rename it to "zxdzlogo."
- Place the image in the root directory of a USB drive and insert it into the device.
- Go to Settings → System → About device → Local Update → select the logo and start the upgrade.
- After the upgrade is complete, go to Car Settings → Factory (enter "000000") → Dedicated logo settings → Boot Screen Logo to change the logo.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | LEEOCAR |
| Display Size | 10" |
| Operating System | Android 13 |
| RAM | 4G |
| ROM | 64G |
| Max External Memory | 64G |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Material | Composite Material |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Built-in DVD Player | No |
| Built-in CD player | No |
| TF/Micro SD Slot | 2 |
| Din | Double Din |
| Interface | USB/RCA |
| Special Features | Wifi function, Support 4G Network, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus |
| Digital Media Format | MP4, Mp3, WMA, JPEG |
| OSD Language | Multi-language support (including English, Spanish, French, German, etc.) |
| Tuner Type | Support FM, AM (Optional) |
| Preset Station | Set by yourself |
| Online Radio | Search multiple channel (Optional) |
| Support Wireless Android Auto/CarPlay | Sync phone to Radio (Optional) |
| GPS navigation map | Built-in offline map, free update |
| AV-OUT | Need converter |
| Support AI voice control | Allow you to make phone calls, navigate, play music... (Optional) |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
| Warranty | 1 Year |
Troubleshooting (FAQs)
- What is the factory password?
A: 000000 - The rear camera image is reversed (left to right). How can I fix it?
A: Please go to Car Settings--General and toggle the "Rear Mirror" option to adjust. - Why is the factory rear camera image not clear?
A: Please note that the factory rear camera image may not be clear enough because the old camera signal uses CVBS (360P), while our new radio screen supports AHD (1080P). We recommend using our supplied camera for better image quality on the new radio. - How do I turn off the camera's guideline?
A: Please go to Car Settings--General and turn off "Reverse Line." - What should I do if the radio experiences issues like freezing and stuttering?
A: Please go to Settings--System--Reset options--Erase all data (factory reset). - Is it possible to support Sirius XM radio?
A: Sorry, but the radio does not have a port for connecting a SiriusXM tuner for Satellite Radio. However, you may want to check the radio's Play Store to see if an online SiriusXM Radio app is available. Please note, though, that we cannot guarantee compatibility with third-party apps. - Does it support the factory microphone?
A: Sorry, the factory microphone cannot be retained. Please connect the external microphone to the 3.5mm port on the RCA cable. We recommend installing the microphone on the driver's side sun visor, with the microphone head facing the driver's face. - Can I use a voice assistant (Siri, etc.)?
A: The voice assistant can only be activated through your phone. You'll need to connect your phone to the radio via Bluetooth, Android Auto, or CarPlay, and then use the voice assistant feature on your phone. - Why is the time not accurate?
A: Please ensure that your GPS antenna is properly connected. We recommend installing the GPS antenna on the A-pillar of your car or just outside the dash (it will not work if installed inside the dash). Next, connect your radio to Wi-Fi or a hotspot, then go to Settings--System--Date and Time, and enable "Use network provided time" and "Use network-provided time zone." - Why is the WiFi connection unstable?
A: Please verify that the single yellow RCA camera port is properly connected to the radio, as the adjacent small wires are intended for receiving Wi-Fi and Bluetooth signals. Also, please note that Bluetooth and WiFi cannot be used at the same time. - What should I do if the original car protocol-related information display or the original car-related settings show errors?
A: Please select the corresponding car model according to the car model protocol selection chart we provided. Connect the car radio to the internet, then go to Car settings → System → CAN Apk Update to complete the upgrade.
Maintenance
To ensure the longevity and optimal performance of your multimedia player, follow these maintenance guidelines:
- Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronics. Do not use abrasive cleaners or solvents.
- General Cleaning: Wipe the unit's exterior with a soft, dry cloth. Avoid spraying liquids directly onto the unit.
- Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold, as this can damage internal components.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes.
User Tips
- GPS Antenna Placement: For best GPS signal reception, ensure the GPS antenna is placed on the A-pillar or outside the dashboard, not inside.
- Wiring Verification: Double-check all wiring connections, especially power and ground, before finalizing installation to prevent issues.
- Test Before Reassembly: After initial wiring, test all functions (radio, GPS, Bluetooth, camera) before fully reassembling your dashboard.
- USB Port Usage: Use the provided 4-pin USB cable for optimal performance with USB devices.
Support and Documentation
For a more detailed user guide and additional technical information, please refer to the official PDF manual available at: Leeocar User Manual (PDF)
How to Access Technical Support
If you encounter any issues not covered in this manual or the FAQs, our support team is here to help. Please scan the QR code below to visit our official website for after-sales support, forum access, system updates, and tips.

Image: QR codes for technical support website and function manual.