DIBILUN CMJ-BD-001

Contents

Instruction Manual

IP65 Waterproof Outdoor Wall Light GX53 LED External Wall Lamp

Model: CMJ-BD-001 | Brand: DIBILUN

1. Introduction

Thank you for purchasing the DIBILUN IP65 Waterproof Outdoor Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your new wall lamp. Please read this manual thoroughly before installation and keep it for future reference.

DIBILUN IP65 Waterproof Outdoor Wall Light installed on an exterior wall at night, highlighting its features: IP65 waterproof, aluminum construction, GX53 lamp compatibility, and 85-265V voltage.

Figure 1: DIBILUN IP65 Waterproof Outdoor Wall Light in use.

For a detailed user manual in PDF format, please refer to the official document available at: User Manual (PDF).

2. Safety Information

Please observe the following safety precautions to prevent injury or damage:

  • Always turn off the power supply at the main circuit breaker before installing, cleaning, or servicing the fixture.
  • Installation should be performed by a qualified electrician or a competent person.
  • Ensure the voltage supply matches the fixture's requirements (85-265V).
  • Do not connect the fixture to an ungrounded electrical system.
  • Do not handle the fixture with wet hands.
  • Ensure all connections are secure and properly insulated.
  • This product is designed for outdoor use with an IP65 rating, providing protection against dust and water jets.

3. Package Contents

Please check that all parts are present and undamaged:

  • 1 x Wall Lamp Fixture (Model: CMJ-BD-001)
  • 1 x Mounting Plate
  • Installation Hardware (screws, wall anchors)

Note: Light bulbs (GX53) are NOT included and must be purchased separately.

Exploded view of the wall lamp components, showing the main lamp body, a GX53 bulb (not included), and two securing rings.

Figure 2: Lamp components (GX53 bulb not included).

4. Specifications

FeatureDetail
ModelCMJ-BD-001
BrandDIBILUN
Item TypeWall Lamp
Lamp HeadGX53
Voltage85-265V AC
Power SourceAC
MaterialCast Aluminum
FinishMatte, Scratch-resistant
Water Resistance LevelIP65 (Water repellent, Rain, Snow, Sun, Wind protection)
Dimensions (Approx.)Height: 20.7 cm (8.15 in), Width: 9.0 cm (3.54 in), Depth from wall: 6.4 cm (2.52 in)
Weight (Approx.)0.9 - 1.3 kg (2 to 2.9 lb)
Luminous Flux60-249 Lumens (bulb dependent)
Bulbs IncludedNo
Max Bulb Wattage25W per GX53 bulb (for 2-head version)
Lifespan50,000+ hours (fixture)
Installation MethodAssembly
ApplicationIndoor/Outdoor (Corridor, Garden, Balcony, Porch, Staircase)
OriginMainland China
Diagram showing the dimensions of the wall light (20.7cm height, 9.0cm width, 6.4cm depth) and key features: 85-265V, IP65 moisture protection, Aluminum, and compatibility with GX53 MAX bulbs up to 25W*2.

Figure 3: Product dimensions and key specifications.

Close-up of the wall light with water droplets, emphasizing its cast aluminum, rust-resistant, matte finish, scratch-resistant properties, and 50,000+ hour lifespan.

Figure 4: Durability features of the wall light.

Image highlighting the IP65 protection rating with icons for rain, snow, sun, and wind protection.

Figure 5: IP65 protection rating details.

5. Installation

Follow these easy 4 steps for installation:

  1. Mounting Plate: Secure the mounting plate to your desired wall location using appropriate screws and wall anchors. Ensure it is level and firmly attached.
  2. Connecting Wire: Connect the electrical wires from your wall to the fixture's wires. Typically, this involves connecting live (brown/black), neutral (blue/white), and ground (green/yellow) wires. Use wire connectors and ensure all connections are secure and insulated.
  3. Tighten the Screws to Secure the Lamps: Align the lamp body with the mounted plate and secure it using the provided screws. Ensure the fixture is tightly fastened to prevent movement.
  4. Install the Light Bulb: Insert the GX53 light bulb(s) into the lamp holder(s). Twist or push to secure the bulb according to its design.
Four-step installation guide: 1. Mounting plate, 2. Connecting wire, 3. Tighten screws to secure lamps, 4. Install light bulb.

Figure 6: Easy 4-step installation process.

After installation, restore power at the circuit breaker and test the light fixture.

6. Operation

Once installed and powered, the wall light operates via your standard wall switch. Simply toggle the switch to turn the light on or off.

  • Ensure compatible GX53 bulbs are used.
  • The fixture supports various GX53 bulb types, including LED, allowing for different light temperatures (warm white, cold white, 3-color change, RGB) based on the bulb chosen.

7. Maintenance

To ensure the longevity and optimal performance of your wall light:

  • Cleaning: Turn off power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Bulb Replacement: Turn off power before replacing bulbs. Allow bulbs to cool completely. Remove the old GX53 bulb by twisting or pulling it out. Insert a new GX53 bulb, ensuring it is securely seated.
  • Inspection: Periodically check the fixture for any signs of damage or loose connections.
Image showing the GX53 base of the wall light, indicating it uses a replaceable bulb for cost-free upgrades.

Figure 7: GX53 replaceable bulb base.

8. Troubleshooting

If your wall light is not functioning correctly, try the following:

  • Light does not turn on:
    • Check if the power supply is on at the main circuit breaker.
    • Ensure the wall switch is in the 'ON' position.
    • Verify that the light bulb is correctly installed and not faulty. Try replacing the bulb.
    • Check wire connections for looseness (ensure power is off before checking).
  • Light flickers:
    • Ensure the bulb is fully screwed in or seated correctly.
    • Check for loose wiring connections.
    • The bulb might be faulty or incompatible; try a different GX53 bulb.

If problems persist, consult a qualified electrician.

9. User Tips

  • Bulb Choice: Experiment with different color temperatures (warm white for ambiance, cool white for brighter illumination) of GX53 LED bulbs to best suit your outdoor space.
  • Placement: For optimal lighting, consider installing multiple units evenly spaced along walls in gardens, corridors, or balconies.
  • Energy Efficiency: Always opt for LED GX53 bulbs for maximum energy savings and longer lifespan.

10. Warranty and Support

For warranty information and customer support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.