1. Introduction
The XGIMI Play 6 is a versatile and portable DLP projector designed for both home and outdoor use. It integrates intelligent projection capabilities with an ambient speaker, offering a comprehensive entertainment experience in a compact form factor.

Key Features:
- Ultimate Portability: Compact design with an integrated 360° gimbal and a built-in 20000mAh battery.
- High-Quality Projection: DLP technology with 1080P resolution and 600 CVIA lumens brightness.
- Immersive Audio: Harman Kardon 2x6W sound system with Dolby decoding and 360° surround sound.
- Smart System: Runs on GMUI 6.0 (Android-based) with MT9 series processor, 1.5GB RAM, and 32GB storage.
- Flexible Connectivity: HDMI (eARC), USB, Type-C, Dual-band Wi-Fi, Bluetooth 5.1, Airplay, DLNA.
2. Setup Guide
2.1 Package Contents
Please check the package for the following items:
- XGIMI Play 6 Projector
- Remote Control
- Power Adapter
- User Manual (this document)
2.2 Initial Charging
Before first use, it is recommended to fully charge the projector. The XGIMI Play 6 features a built-in 20000mAh battery.
- Connect the provided power adapter to the Type-C port on the projector.
- Plug the power adapter into a wall outlet.
- The charging indicator will illuminate. Once fully charged, the indicator may change color or turn off depending on the model.

2.3 Powering On/Off
- To Power On: Press and hold the Power button on the projector or remote control for a few seconds until the device starts up.
- To Power Off: Press and hold the Power button until a shutdown prompt appears, then confirm. A short press usually puts the device into standby mode.
2.4 Placement and Adjustment
The XGIMI Play 6 features an integrated 360° gimbal for flexible placement.
- Place the projector on a stable surface.
- Adjust the integrated gimbal to direct the projection onto a wall, screen, or ceiling at your desired angle.
- The projector supports 6-way fully automatic trapezoidal correction and autofocus, which will automatically adjust the image shape and clarity.
2.5 Initial System Setup
Upon first power-on, you will be guided through the initial setup process for the GMUI 6.0 operating system:
- Language Selection: Choose your preferred language.
- Network Connection: Connect to your Wi-Fi network by selecting it from the list and entering the password.
- Account Login (Optional): You may be prompted to log in to a Google or XGIMI account for full access to apps and services.
- Follow on-screen instructions to complete the setup.
3. Operating Instructions
3.1 Projection Settings
- Autofocus & Keystone Correction: The projector automatically adjusts focus and corrects trapezoidal distortion. If needed, these can usually be triggered manually via the remote control or system settings.
- Projection Distance & Size: The recommended projection distance is 1-3 meters, yielding a projected dimension of 60-120 inches.
- Projection Modes: Supports Throwing (front projection), Ceiling (inverted front projection), Back Projection, and Mirror Image modes. These can be selected in the system settings.
3.2 Input Sources
The XGIMI Play 6 offers multiple ways to display content:
- HDMI (eARC): Connect external devices like Blu-ray players, gaming consoles, or set-top boxes.
- USB: Play media files directly from a USB flash drive.
- Type-C: Can be used for power supply and potentially for data transfer (check specific device compatibility).
- Wireless Projection: Supports Airplay (for Apple devices), DLNA, and the XGIMI APP for screen mirroring from compatible smartphones and tablets.
- Bluetooth 5.1: Connect Bluetooth speakers, headphones, or other accessories.
3.3 Audio System
The projector features a Harman Kardon 2x6W sound system with Dolby decoding for rich audio.
- Ambient Speaker Mode: When the device is closed, long-press the power button to activate the ambient speaker mode. The light will follow the sound, creating an immersive audio-visual experience.
- Volume Control: Adjust volume using the remote control or on-device buttons.

3.4 Battery Life
The built-in 20000mAh battery provides:
- Approximately 2.5 hours of movie watching in energy-saving mode.
- Approximately 6 hours of music listening in pure music mode.

4. Maintenance
4.1 Cleaning
- Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Gently wipe the lens to remove dust or smudges. Avoid abrasive materials or harsh chemicals.
- Body: Wipe the projector's exterior with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water, then wipe dry. Do not use solvents or abrasive cleaners.
- Ventilation: Ensure the ventilation ports are clear of dust and obstructions to prevent overheating. Use a soft brush or compressed air to gently clean them.
4.2 Storage
- Store the projector in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- If storing for an extended period, it is advisable to partially charge the battery (around 50-60%) before storage and periodically recharge it every few months to maintain battery health.
4.3 Battery Care
- Avoid fully discharging the battery frequently.
- Do not expose the projector to extreme heat or cold, as this can degrade battery performance and lifespan.
- Use only the original or certified compatible power adapter for charging.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Projector does not power on | Low battery; Power adapter not connected; Power button not pressed long enough | Charge the projector; Ensure power adapter is securely connected; Press and hold the power button for a few seconds |
| No image projected | Incorrect input source; Lens cap on; Projector in standby mode | Select correct input source (HDMI, USB, etc.); Remove lens cap; Power on the projector |
| Image is blurry | Out of focus; Dirty lens; Projector too close/far from surface | Allow autofocus to adjust or manually adjust focus; Clean the lens; Adjust projection distance |
| Image is distorted (not rectangular) | Keystone correction needed; Projector not perpendicular to surface | Allow auto keystone correction or manually adjust; Reposition projector |
| No sound | Volume too low; Muted; Incorrect audio output settings; External device audio issue | Increase volume; Unmute; Check audio output settings in system; Check audio settings on connected device |
| Remote control not working | Dead batteries; Obstruction; Not paired | Replace batteries; Remove obstructions; Re-pair remote control (refer to system settings) |
| Wi-Fi/Bluetooth connection issues | Network problem; Device too far; Interference | Restart projector and router; Move closer to router/device; Reduce interference |
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | XGIMI Play 6 |
| Appearance | Portable vertical design, integrated gimbal |
| Display Technology | DLP |
| Display Chip | 0.23" DMD |
| Lens | High-transmittance coated lens |
| Brightness | 600 CVIA / 500 ISO |
| Standard Resolution | 1920x1080 |
| Compatible Resolution | 2K / 4K |
| Throw Ratio | 1.2:1 |
| Keystone Correction | Full automatic keystone correction |
| Projection Modes | Front, Rear, Ceiling Front, Ceiling Rear |
| Audio Brand | Harman Kardon |
| Audio Power | 2*6W |
| CPU | MT9 series |
| RAM | 1.5GB |
| Internal Storage | 32GB |
| Operating System | GMUI 6.0 |
| Multi-screen Interaction | Airplay / DLNA / XGIMI APP |
| Input Ports | HDMI x1 (eARC), USB x1, Type-C x1 |
| Wi-Fi | Dual-band 2.4/5GHz, 802.11a/b/g/n/ac |
| Bluetooth | Bluetooth 5.1 |
| Noise | 28dB@1m |
| Power Consumption | <65W |
| Power Supply | 200-240V 50Hz |
| Built-in Battery Capacity | 20000 mAh |
| Battery Life | 2.5h movie, 6h music (energy-saving mode) |
| Product Dimensions (L x W x H) | 96.5 x 96.5 x 207.6 mm |
| Product Weight | 1.31 kg |
| Package Dimensions (L x W x H) | 198 x 159 x 286 mm |
| Package Weight | 2.23 kg |
7. User Tips
- Optimal Viewing Environment: For the best image quality and brightness, use the projector in a completely dark environment. Ambient light will significantly affect the perceived brightness and contrast.
- Image Clarity: The projector uses a 0.23" DMD chip with XPR technology to achieve 1080P output from a native 480P resolution. When viewed very closely, a slight pixelated effect might be noticeable. This is normal for this technology.
- Power Bank Functionality: The Type-C port can support power supply for other devices, allowing you to charge phones or tablets in emergencies.
8. Warranty and Support
8.1 Warranty Information
The XGIMI Play 6 projector comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official XGIMI website for detailed terms and conditions regarding warranty coverage, duration, and service procedures.
8.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact XGIMI customer support through their official website. You may also find additional resources and FAQs there.
A detailed user manual in PDF format is available for download: View User Manual (PDF)