TYT TH-9000D Plus/Pro

Contents

TYT TH-9000D Plus/Pro Analog Mobile Radio

User Instruction Manual

1. Introduction

Thank you for choosing the TYT TH-9000D Plus/Pro Analog Mobile Radio. This product features a newly developed function menu and humanism operation design, making it user-friendly and efficient. It is designed to meet your communication requirements with its compact size and robust features.

The TH-9000D Plus/Pro offers stable and reliable functions, making it perfect for amateur radio enthusiasts and professional users alike. It supports various frequency bands including VHF (136-174MHz), UHF (400-490MHz), and 200-260MHz, with selectable output power up to 60W for VHF and 45W for UHF.

TYT TH-9000D Plus/Pro Mobile Radio with frequency versions

Figure 1: TYT TH-9000D Plus/Pro Mobile Radio with available frequency versions (136-174MHz, 200-260MHz, 400-480MHz).

2. Safety Precautions

Please observe the following precautions to prevent fire, personal injury, or transceiver damage:

  • Do not attempt to configure your transceiver while driving; it is dangerous.
  • This transceiver is designed for a 13.8V DC power supply. Do not use a 24V battery.
  • Do not place the transceiver in excessively dusty, humid, or wet areas, nor on unstable surfaces.
  • Keep the transceiver away from interferential devices (such as TV, generators, etc.).
  • Do not expose the transceiver to long periods of direct sunlight or place it close to heating appliances.
  • If an abnormal odor or smoke is detected, turn OFF the power immediately and contact your dealer.
  • Do not transmit with high output power for extended periods; the transceiver may overheat. Note: The radio surface can become high-temperature; avoid touching after long-term use.
Front view of TYT TH-9000D radio with microphone and high-temperature warning

Figure 2: Front view of the radio with microphone, showing the display and a warning about high-temperature surfaces.

3. Package Contents

Carefully unpack the transceiver and identify the following items. It is recommended to keep the box and packaging for future use.

3.1. Supplied Accessories

  • TH-9000D Radio Body
  • Microphone (THM-03) with DTMF keyboard
  • Mobile Mounting Bracket (TMB-01)
  • DC Power Cable with Fuse Holder (TRL-01)
  • Black Screws (M4x8mm) (TSS-01A)
  • Tapping Screws (M5x8mm) (TSS-01B)
  • S-Washer (TSS-01D)
  • Spare Fuses
  • User Manual
Contents of the TYT TH-9000D Plus/Pro box

Figure 3: Contents of the product box, including the radio, microphone, mounting bracket, power cable, and manual.

3.2. Optional Accessories

  • Cloning Cable (CP-50)
  • USB Programming Cable (PC50)
  • Cigar-Plug Connection Line (TCC-01)
  • Programming Software
  • Regulated Power Supply (TRP-01)
  • Desktop Microphone (DHM-02)
  • Car Antenna (TCA-01)
  • Alarm Cable A (TMD-01)
  • Alarm Cable B (Extension line) (TL-01(A))
  • External Speaker (SP-01)

4. Setup

4.1. Mobile Installation

  1. Select a safe, convenient, and well-ventilated location in your vehicle that minimizes danger to passengers and is shielded from direct sunlight.
  2. Install the mounting bracket using the supplied self-tapping screws (4pcs) and flat washers (4pcs).
  3. Position the transceiver and secure it with the supplied hexagon SEMS screws. Ensure all screws are tightened to prevent vibration.

4.2. DC Power Cable Connection

The vehicle battery must be 12V. Never connect to a 24V battery.

  1. Route the DC power cable directly to the vehicle's battery terminals using the shortest path. Avoid using the cigarette lighter socket due to potential voltage drop.
  2. Ensure the cable is isolated from heat, moisture, and engine ignition system cables.
  3. Before connecting, disconnect the negative (-) terminal of the battery to avoid short circuits.
  4. Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal. Use the full length of the cable.
  5. Reconnect the negative terminal of the battery.
  6. Connect the DC power cable to the transceiver's power supply connector, ensuring it clicks into place.
  7. For ignition-key on/off functionality, connect an optional cigar-plug cable between the ACC terminal or a cigar-plug socket and the EXT POWER jack on the rear of the unit.

4.3. Fixed Station Operation

A separate 13.8V DC power supply (not included) with a recommended current capacity of 12A is required.

  1. Connect the DC power cable to the regulated DC power supply, ensuring correct polarity (red to positive, black to negative). Do not connect directly to an AC outlet.
  2. Connect the transceiver's DC power connector to the DC power cable.
  3. Before connecting, ensure both the transceiver and the DC power supply are OFF.

4.4. Antenna Connection

Install an efficient, well-tuned 50 Ohm impedance antenna with a low-loss coaxial feed-line. Transmitting without an antenna or matched load may damage the transceiver. For fixed stations, use a lightning arrester.

4.5. Accessories Connections

  • External Speaker: Use an 8 Ohm speaker with a 3.5mm (1/8") mono plug. Ensure the speaker is not connected to ground as this will cause damage.
  • Microphone: Connect the 8-pin modular plug into the socket on the front panel.
  • PC Connecting: To use the optional TH-9000D software, connect the transceiver to your PC using the optional programming cable PC50 (via Data socket).

5. Operating Instructions

5.1. Getting Acquainted

The transceiver features a clear front panel, rear panel, display, and microphone for easy operation.

Front Panel Controls:

  • PWR (Power): Power on/off.
  • VOL: Adjust volume.
  • Main Dial: Change frequency, memory channel, scan direction.
  • F (Function Key): Confirms selective functions, enters setting mode (long press).
  • P1-P5 Keys: Programmable for various functions like TX power, voice compander, memory store/delete, keypad lock, data clone, voltage display, scan mode, repeater offset, auto dialer.
  • Data Terminal: For data reading/writing, cloning, theft alarm.
  • TX Indicator: Lights during transmission.
  • Mic. Connector: Microphone connection port.

Microphone Controls:

  • UP/DOWN Keys: Increase/decrease frequency, channel, or setting value.
  • PTT (Push-To-Talk): Transmit.
  • Number Keys: Input VFO frequency or DTMF dial.
  • DTMF ON/OFF: Switches between DTMF dialing and function operation.
  • LOCK Switch: Locks UP/DOWN and function keys.
  • MIC: Speak here.

5.2. Basic Operations

  1. Power On/Off: Press the PWR key or turn the ignition key to ACC/ON.
  2. Adjusting Volume: Turn the VOL knob clockwise to increase, counter-clockwise to decrease.
  3. Switching VFO/Channel Mode: In standby, press the P3 key or Microphone's VFO/MR key.
  4. Adjusting Frequency/Channel: In VFO mode, use the Main Dial. In channel mode, use the Main Dial or Microphone's UP/DOWN keys.
  5. Receiving: When a signal is received, the display shows 'BUSY' and field intensity.
  6. Transmitting: Press P2 or Microphone's P2 to monitor. If clear, press and hold PTT to speak. Hold the microphone 2.5-5.0cm from your lips.

5.3. Advanced Operations

  • Squelch Off: Press P2 to disable squelch; press again to resume.
  • Squelch Level Setup: Press P2 and turn the Main Dial simultaneously.
  • Frequency/Channel Scan: In VFO mode, long press P3 for frequency scan. In channel mode, long press P3 for channel scan.
  • CTCSS/DCS Encode and Decode: Repeatedly press P5 to check/set CTCSS/DCS.
  • High/Mid/Low Power Switch: Press F then P1 to cycle through power levels.
  • Voice Compander: Press F then P2 to turn on/off.
  • Offset Direction and Frequency: Press F then P4 to set repeater offset.
  • Keypad Lockout: Press F then P5 to lock/unlock main keys.
  • DTMF Auto-Dialer: Press P5 to enter auto-dialer mode.
  • Scrambler (Encryption): Press F then P1/P2 (Menu 15) to select scrambler group.
  • Noise Cancellation: (Pro model only for TX/RX, Plus model for RX only). Access via F (3s) then P1/P2 (Menu 31 for RX, Menu 32 for TX).
  • VOX Function: (Pro model only). Access via F (3s) then P1/P2 (Menu 33 for switch, Menu 34 for level).
  • Long-distance Anti-theft Alarm: Connect optional alarm cable to data jack. Enable by pressing PWR key when transceiver is off.

6. Maintenance

6.1. Replacing Fuses

If a fuse blows, determine the cause and correct the problem before replacing it with a fuse of the specified type and rating (15A for transceiver, 20A for DC power cable). Do not use the transceiver for long periods when the vehicle battery is not fully charged.

6.2. Cleaning

Use a soft, dry cloth to clean the transceiver. Do not use harsh chemicals or solvents.

6.3. Factory Default Reset

If the radio malfunctions, a factory reset may resolve the issue. Be aware that this will erase memory data. To reset: Press F (2s), then P1/P2 (Menu 30), select 'FACT' or 'SETUP', then P4.

7. Troubleshooting

ProblemPossible Causes and Solutions
Power on, nothing on DisplayPolarity reversed (+/-), check connections.
Fuse is blownFind cause, replace fuse.
Display is too dimDimmer setting is 'LAMP-L', change to 'LAMP-H'.
No sound from speakerSquelch muted, decrease level. Tone/CTCSS/DCS active, turn off.
Key and Dial do not functionKey-lock function activated, cancel lock.
Rotating Dial won't change memoryTransceiver in CALL mode, press VFO or memory mode.
PTT key pressed, no transmissionMicrophone connection poor, antenna connection poor.

8. Specifications

8.1. General

  • Frequency Range: VHF: 136-174MHz, 245-245.9875MHz (220-260MHz), UHF: 400-490MHz
  • Number of Channels: 200
  • Channel Spacing: 25K (Wide), 20K (Middle), 12.5K (Narrow)
  • Phase-locked Step: 5KHz, 6.25KHz, 8.33KHz, 10KHz, 12.5KHz, 15KHz, 20KHz, 25KHz, 30KHz, 50KHz
  • Operating Voltage: 13.8V DC ±15%
  • Squelch: Carrier/CTCSS/DCS/5Tone/2Tone/DTMF
  • Frequency Stability: ±2.5ppm
  • Operating Temperature: -20℃ ~ +60℃
  • Dimensions (WxHxD): 145mm x 47mm x 190mm
  • Weight: Approx. 1.2kg

8.2. Receiver (ETSI EN 300 086 standard testing)

  • Sensitivity (12dB Sinad): ≤0.25μV (Wide), ≤0.35μV (Narrow)
  • Adjacent Channel Selectivity: ≥70dB (Wide), ≥60dB (Narrow)
  • Intermodulation: ≥65dB (Wide), ≥60dB (Narrow)
  • Spurious Rejection: ≥70dB (Wide), ≥70dB (Narrow)
  • Audio Power Output: > 2W@10%

8.3. Transmitter (ETSI EN 300 086 standard testing)

  • Power Output: 60W/25W/10W (VHF), 45W/25W/10W (UHF)
  • Modulation: 16KF3E (Wide), 11KF3E (Narrow)
  • Adjacent Channel Power: ≥70dB (Wide), ≥60dB (Narrow)
  • Spurious Emission: ≥60dB

9. User Tips

  • For optimal audio clarity and noise reduction, consider the 'Pro' model if you require noise cancellation on both transmit (TX) and receive (RX) sides, as the 'Plus' model only offers RX noise cancellation.
  • When programming the transceiver, always read the factory initial data first before rewriting frequencies or signaling to avoid potential errors due to different frequency bands.
  • Ensure your power supply is stable and provides sufficient current (13.8V DC, 12A recommended) to prevent display dimming or power drops during transmission.

10. Warranty and Support

TYT provides a warranty for its products. For specific warranty terms, service, or technical support, please contact your authorized TYT dealer or the point of purchase. Always refer to your dealer for any issues that cannot be resolved using this manual.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.