1. Introduction
Thank you for purchasing the OWLLON R40S Pro Retro Gaming Console. This handheld device is designed to provide a rich retro gaming experience with its 3.5-inch IPS screen, extensive game library, and long-lasting battery. This manual will guide you through the setup, operation, and maintenance of your new console.
2. Package Contents
Please check the package for the following items:
- 1 x R40S Pro Handheld Game Console
- 1 x 256GB TF Card (pre-installed with 30,000+ games)
- 1 x USB Type-C Charging Cable
- 1 x User Manual (PDF version available online)
3. Product Overview
Familiarize yourself with the console's layout and functions:
Figure 3.1: R40S Pro Key Function Diagram. Labels include Power on/off, Reset, TF2-GAME, TF1-OS, Direction keys, Select, Left Rocker, Right Rocker, FN Key, Start, Function keys, -VUL+, 3.5mm audio jack, DC, OTG, L1, L2, R2, R1. Key combinations for Enter, Exit, Game Save, Game Fast Forward, Game Pause, Game Coins are also shown.
Figure 3.2: R40S Pro Product Parameter Diagram. Illustrates console dimensions (Length: 3.2 inches, Length: 1 inch, Height: 5.1 inches) and highlights ports (DC, OTG, 3.5mm headphone jack) and built-in speaker.
Figure 3.3: R40S Pro Connectivity Ports. Shows the Type-C charging cable, charging port, OTG adapter, and 3.5mm headphone jack.
Figure 3.4: High-Quality Thumb Grip Caps. A close-up of the dual 3D joysticks with enhanced thumb grip caps.
Figure 3.5: R40S Pro L/R Button Upgrade. Depicts the upgraded spring four-plate L/R keys on the back of the console.
4. Initial Setup
4.1 First Use
- Ensure the TF card (pre-installed with games) is properly inserted into the TF card slot.
- Connect the console to a power source using the provided Type-C charging cable to ensure it has sufficient charge for normal startup.
- To power on, press and hold the power key for 1 second.
4.2 Power On/Off
- Boot: Long press the power supply button for 1 second.
- Shutdown: Press the power supply button for 3 seconds to open the shutdown menu, then press the 'A' button to confirm shutdown.
5. Operation
5.1 Navigating and Starting Games
- From the game catalog, use the direction keys to select a game.
- Press the 'A' button to start the selected game.
5.2 Exiting a Game
- While in a game, press the 'MENU' button to open the in-game menu.
- Select the "Exit" option.
- Press the 'A' button to confirm exiting the game.
5.3 Saving and Loading Game Progress
The console supports up to 10 save states per game.
- While in a game, press the 'MENU' button to open the in-game menu.
- Select either the "Save" or "Load" option.
- Use the direction keys (LEFT/RIGHT) to choose a recording position.
- Press the 'A' button to save or load the game progress.
5.4 Key Functions (In-Game)
- Enter: A Key
- Exit: B Key
- Game Save: FN + X Key
- Game Load: FN + Start Key
- Game Pause: FN + A Key
- Game Fast Forward: FN Key
- Game Coins: Select Key
Note: Key functions may vary for some games.
5.5 Idle, Sleep, and Wake-up Modes
- If there is no operation for 60 seconds, the console will enter idle mode, and the screen will dim.
- In idle mode, press any button to wake the console.
- If there is no operation for 5 minutes, or if you short press the power key, the console will enter sleep mode, turning off the screen and sound.
- The console will automatically shut down after 10 minutes of no operation in sleep mode.
- You can adjust the sleep time or disable sleep mode in the settings.
- To wake from sleep mode, press the power key.
5.6 Settings Menu
To access the settings menu, press the 'MENU' button. Use the UP/DOWN arrow keys to select items and LEFT/RIGHT to modify values. Press 'A' to enter sub-menus.
- Brightness: Adjust screen brightness (e.g., 04/10).
- Language: Select system language (e.g., English).
- Keys Map: Configure button mappings.
- BGM Volume: Adjust background music volume (e.g., 08/10).
- Hibernate: Set the idle time before entering sleep mode (e.g., 5m later).
- Factory Reset: Reset console to factory defaults.
5.7 Indicator Light Status
- Green light Always On: Console is powered on.
- Red light Always On: Console is charging.
- Blue light Always On: Charging is complete.
5.8 Headset Connection
You can connect a headset via the 3.5mm audio port for private listening.
6. Maintenance
6.1 Cleaning
Use a soft, dry cloth to clean the console's exterior. Do not use any diluents, volatile liquids, or abrasive cleaners, as these can damage the product.
6.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the console regularly, even if not in use for extended periods.
Figure 6.1: 3800mAh Battery Life. The console features a 3800mAh 3.7V Li-po rechargeable battery, providing up to 10 hours of playtime with max 5V 1.5A or 2A charging via USB C cable.
7. Troubleshooting
- Console does not turn on: Ensure the battery is charged. Connect the console to the charger for at least 30 minutes before attempting to power on again.
- Games not appearing: Verify the TF card is properly inserted. If you added new games, ensure they are in the correct directory on the TF card and perform a "Refresh ROM" from the MENU.
- Screen is dim or unresponsive: Check screen brightness settings in the MENU. If unresponsive, try a soft reset by holding the power button for 10 seconds.
- Sound issues: Check the BGM Volume in settings. Ensure headphones are properly connected if in use.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | OWLLON |
| CPU | RK3326, ARM 64Bit Quad Core Cortex-A35 CPU up to 1.5Ghz |
| GPU | Mali-G31MP (520MHZ) |
| RAM | DDR3L 1GB |
| Operating System | ArkOS |
| Display Size | 3.5 inches |
| Screen Type | IPS |
| Screen Resolution | 640x480 |
| Battery Capacity | 3800mAh (3.7V Li-po rechargeable) |
| Battery Life | Up to 10 hours |
| Charging Interface Type | Type-C (Input power: 5V 2A) |
| Games Included | 30,000+ (on 256GB TF Card) |
| Supported Emulators | PSP, PS1, NDS, N64, CPS1, CPS2, NEOGEO, GBA, GB, FC, SFC, MD, MAME, and more. |
| Connectivity | WIFI, 3.5mm Audio Jack, OTG |
| Dimensions (Approx.) | Length: 3.2 inches (81mm), Width: 1 inch (25mm), Height: 5.1 inches (130mm) |
| Certifications | CE, FCC, RoHS |
9. Firmware Upgrade
To upgrade the console's firmware:
- Ensure the console is in a shutdown state.
- Place the firmware update file (Mirror file) in the root directory of the TF card.
- Insert the TF card into the console's TF card slot.
- Connect the charging cable to the console. The console will automatically enter charging mode and begin the firmware upgrade process.
10. User Tips
- For optimal performance, ensure your TF card is of good quality and properly formatted.
- Experiment with different emulator settings to find the best balance between performance and visual quality for various games.
- Regularly check for firmware updates to ensure you have the latest features and bug fixes.
11. Safety Information
Please observe the following safety precautions:
- To avoid damage, do not expose the machine to liquids.
- Do not modify, repair, or disassemble the product. Unauthorized modifications can void your warranty and pose safety risks.
- Do not use any diluent or volatile liquids to clean this product.
- Avoid exposure to high temperatures or direct contact with flame.
12. Warranty and Support
Your R40S Pro Retro Gaming Console comes with a standard manufacturer's warranty. For any technical issues, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer's customer support. Refer to the official product page or included documentation for specific warranty terms and contact details.
A PDF version of the user manual is available for download from the seller's product page or by searching for "R40S Pro User Manual PDF" online.
13. Manufacturing Process
The R40S Pro console undergoes a meticulous manufacturing process to ensure quality and performance. This includes assembly, soldering, and rigorous testing of components.
Video 13.1: R40S Pro Manufacturing Process. This video shows various stages of assembly and quality control for game controllers in a factory environment.