MOFii SK-695DM

Contents

MOFii ANNI Dual-Mode Wireless Keyboard

Model: SK-695DM

1. Introduction

Thank you for choosing the MOFii ANNI Dual-Mode Wireless Keyboard. This manual provides essential information for setting up, operating, and maintaining your keyboard to ensure optimal performance. This keyboard offers versatile connectivity options, supporting both Bluetooth and 2.4G wireless modes, and is compatible with multiple operating systems.

MOFii ANNI Keyboard on a desk with a laptop and accessories

Figure 1: MOFii ANNI Dual-Mode Wireless Keyboard in a typical setup.

2. Safety Warnings

WARNING: CHOKING HAZARD

  • This product contains small parts and is not suitable for children under 3 years of age.
  • Keep all packaging materials away from children.

3. Package Contents

Please check the package for the following items:

  • MOFii ANNI Dual-Mode Wireless Keyboard
  • Magnetic Bear Figurine
  • USB 2.4G Receiver (stored in the keyboard's battery compartment)
  • User Manual (this document)

Note: Batteries (2*AAA) are not included due to shipping restrictions and must be purchased separately.

4. Setup

4.1. Battery Installation

  1. Locate the battery compartment on the bottom of the keyboard.
  2. Open the battery compartment cover.
  3. Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.
  5. Slide the power switch on the bottom of the keyboard to the 'ON' position.
Keyboard with disassembled parts and battery note

Figure 2: Keyboard components and battery requirement (2*AAA batteries).

4.2. Connecting via Bluetooth

Your MOFii ANNI keyboard supports two Bluetooth channels (BT1 and BT2), allowing you to connect to two different devices simultaneously and switch between them.

  1. Prepare Your Device: Turn on Bluetooth on your computer, tablet, or smartphone and enter its Bluetooth search mode.
  2. Select Bluetooth Channel: On the keyboard, press the Fn key simultaneously with BT1 (for Bluetooth channel 1) or BT2 (for Bluetooth channel 2).
  3. Enter Pairing Mode: Hold down the selected Fn+BT1 or Fn+BT2 combination for more than 3 seconds. The corresponding green indicator light (for BT1 or BT2) on the keyboard will flash slowly, indicating it is in pairing mode.
  4. Connect: On your device, look for the keyboard's name (e.g.,
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.