1. Product Overview
The Zigbee 4-in-1 Smart Motion Sensor is a versatile device designed for smart home automation. It integrates four key detection capabilities into a single compact unit:
- MmWave Radar Sensor: For precise human motion detection.
- Luminance Detection: Measures ambient light levels.
- Temperature Detection: Monitors room temperature.
- Humidity Detection: Measures air humidity.
This sensor operates on the Zigbee 3.0 protocol and requires a Zigbee gateway for full functionality and integration with the Tuya Smart App or Smart Life App.
Figure 1: Zigbee 4-in-1 Smart Motion Sensor highlighting its core features.
Figure 2: Visual representation of the sensor's four integrated functions: Motion, Light, Temperature, and Humidity.
2. Setup and Installation
2.1. Battery Installation
- Push down to open the battery cover on the back of the device.
- Insert two AAA (LR03) batteries into the battery compartment, ensuring correct polarity.
- Close the battery cover securely.
Note: Batteries are not included with the product.
Figure 3: Diagram illustrating battery installation and product specifications.
2.2. App Installation and Device Pairing
- Download the App: Scan the QR code provided in the manual or search for "Smart Life" or "Tuya Smart" app in the Google Play Store (Android) or App Store (iOS).
- Register/Log In: Register for an account or log in if you already have one.
- Connect to Network: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network.
- Add Gateway: Ensure your Zigbee intelligent gateway is successfully added to the app and is within effective range of the sensor.
- Add Sensor:
- Open the app and navigate to the "Smart Gateway" page.
- Tap the "Add Sub Device" button.
- Select "Temperature and Humidity Sensor" from the device list.
- Use a reset pin (or similar small tool) to press and hold the reset hole on the sensor for more than 5 seconds until the indicator light flashes.
- Follow the on-screen instructions in the app to complete the pairing process.
- Once successfully added, the device will appear in your "My Home" list.
Figure 4: App download QR code and diagram showing the reset hole location.
Figure 5: The sensor uses Zigbee 3.0 protocol and requires a Zigbee gateway.
3. Operating Instructions
3.1. Motion Detection
The sensor uses MmWave radar to detect human motion within a range of 0.5 to 10 meters. The detection angle is approximately 110° ±10°. You can set up automation rules in the app to trigger actions based on motion detection, such as turning on lights when someone enters a room.
Figure 6: Detection angle of 110° ±10° with high and low sensitivity zones.
Figure 7: Motion detection range from 0.5m to 10m.
3.2. Environmental Monitoring (Temperature, Humidity, Luminance)
The sensor continuously monitors temperature, humidity, and ambient light (luminance). These readings can be viewed in the Tuya Smart or Smart Life app. You can create intelligent linkage scenarios to automate other smart devices based on these environmental conditions.
- Luminance: Automatically turn on/off lights based on ambient light levels.
- Temperature: Control air conditioners or heaters based on room temperature.
- Humidity: Activate humidifiers or dehumidifiers based on air humidity.
Figure 8: Example of intelligent linkage: turning lights on/off based on motion and luminance.
Figure 9: Example of intelligent linkage: automatically turning on the air conditioner when the temperature is hot.
Figure 10: Example of intelligent linkage: automatically turning on an electric heater when the temperature is cold.
Figure 11: Example of intelligent linkage: automatically turning on a humidifier when the air is dry.
3.3. Motion Alarm Notifications
The sensor can send real-time notifications to your smartphone via the app when motion is detected in the monitored area. This feature can be used for security purposes to alert you of unexpected entries or movements.
Figure 12: App notification for motion detection.
4. Maintenance
4.1. Battery Replacement
When the battery level is low, the sensor may send a notification to the app. Replace the AAA batteries as described in Section 2.1 to ensure continuous operation.
4.2. Cleaning
Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or sprays, as they may damage the internal components.
5. Troubleshooting
- Device not connecting to app: Ensure your Zigbee gateway is powered on and connected to the internet. Verify your phone is on a 2.4GHz Wi-Fi network. Try resetting the sensor (Section 2.2) and re-pairing.
- Motion not detected: Check the sensor's placement to ensure it covers the desired area. Verify the detection range and angle (Figures 6 & 7). Ensure batteries are not depleted.
- Inaccurate readings: Ensure the sensor is not placed near heat sources, direct sunlight, or in areas with extreme drafts, which can affect temperature and humidity readings.
IMPORTANT COMPATIBILITY WARNING:
Figure 13: Official warning regarding unsupported platforms.
This product is a Tuya smart product and ONLY supports the Smart Life and Tuya APP. It does NOT support Z2MQTT, HomeAssistant (HA), Matter gateway, HomeKit, or Sonoff. Please ensure compatibility with your existing smart home system before purchase.
6. Specifications
| Parameter | Value |
|---|---|
| Product Name | Human Motion Sensor |
| Wireless Protocol | Zigbee 3.0 |
| MW Frequency | 10.525GHz |
| Detection Angle | 110° ±10° |
| Detection Distance | 0.5~10 meters (z axis) |
| Luminance Meter Range | 0~3000Lux |
| Temperature Resolution | 0.1°C |
| Humidity Resolution | 1% |
| Temperature Measurement Accuracy | ±0.3°C |
| Humidity Measurement Accuracy | ±3% |
| Working Voltage | DC 3.0V |
| Battery Type | LR03 AAA |
| Standby Current | ≤80uA |
| Standby Time | ≥8 Months |
| Working Temperature | -10°C ~ 55°C |
| Working Humidity | max 99%RH |
| Product Size | 70×24.5×20mm |
7. User Tips
- Gateway is Essential: Always remember that this is a Zigbee device and requires a compatible Zigbee gateway to function. It cannot connect directly to Wi-Fi.
- App Specificity: Use only the Tuya Smart or Smart Life app for setup and control. Attempting to integrate with other platforms like Home Assistant or Z2MQTT will not work and is explicitly unsupported.
- Optimal Placement: For best motion detection, place the sensor where it has a clear line of sight to the area you wish to monitor. Avoid placing it behind large objects or in direct paths of strong air currents if temperature/humidity accuracy is critical.
- Battery Life: While the standby time is long, consider using high-quality AAA batteries for extended performance.
8. Frequently Asked Questions (FAQ)
- Q: Do I need a special hub or gateway for this sensor?
- A: Yes, this is a Zigbee device and requires a Zigbee gateway (hub) to connect to your home network and the Tuya Smart/Smart Life app.
- Q: Is this sensor compatible with Home Assistant or Z2MQTT?
- A: No, the manufacturer explicitly states that this product only supports the Tuya Smart and Smart Life applications and is not compatible with Z2MQTT, Home Assistant, Matter gateway, or HomeKit.
- Q: What are the main functions of this 4-in-1 sensor?
- A: It detects human motion (via MmWave radar), ambient light (luminance), temperature, and humidity.
- Q: What type of batteries does it use?
- A: It uses two AAA (LR03) batteries.
9. Warranty and Support
For specific warranty information and technical support, please refer to the seller or the official product page where you purchased the device. You may also find additional details in the official user manual PDF: