1. Product Overview
This accessory is designed to enhance the functionality and safety of your All-Terrain Vehicle (ATV) or Utility Terrain Vehicle (UTV). It functions as a stop sensor or brake switch pressure sensor, ensuring proper operation of your vehicle's braking system.
The sensor is identified by OEM part number 705601250.
2. Safety Warnings
- Do not operate the vehicle in hazardous areas. Always ensure a safe operating environment.
- Before each use, inspect whether the accessories are securely installed.
- Strictly prohibit overloading or overspeed operation of the vehicle.
3. Package Contents
The package typically includes:
- 1 x Brake Pressure Sensor (OEM: 705601250)
- 2 x Sealing Washers (as shown in product images)
4. Installation Instructions
- **Turn off the vehicle power supply** before beginning any installation to prevent electrical hazards.
- **Locate the existing brake pressure sensor** on your Can Am Maverick, Defender, or Commander Max. Refer to your vehicle's service manual for the exact location.
- **Carefully remove the old sensor**, ensuring to catch any brake fluid that may leak.
- **Install the new 705601250 sensor** to the designated location. Use the provided new sealing washers to ensure a leak-free seal. Tighten to the manufacturer's recommended torque specifications (refer to your vehicle's service manual).
- **Connect the electrical connector** to the new sensor. Ensure it clicks into place securely.
- **Bleed the brake system** if necessary, following your vehicle's service manual procedures, to remove any air introduced during the sensor replacement.
- **After installation, start the vehicle** and conduct an operational test of the brake system to confirm proper function of the new sensor.
5. Operation
The 705601250 Stop Sensor operates automatically as part of your vehicle's braking system. It detects brake fluid pressure changes when the brake pedal is pressed and sends a signal to the vehicle's electronic control unit (ECU) to activate the brake lights and other related functions.
Upon successful installation, the sensor should function seamlessly with your vehicle's existing systems.
6. Maintenance
- Regularly inspect the sensor and its wiring for any signs of damage, corrosion, or loose connections.
- Ensure the mounting screws remain tight. If the accessory becomes loose, retighten the mounting screws.
- Keep the sensor area clean and free from excessive dirt or debris.
- When not in use for extended periods, store the vehicle in a dry location to protect all components, including the sensor, from environmental damage.
7. Troubleshooting (FAQs)
- Q: What should I do if the accessory becomes loose?
- A: Retighten the mounting screws. Ensure they are torqued to the vehicle manufacturer's specifications.
- Q: How should I address abnormal noise during operation?
- A: Verify correct installation. Check all connections and mounting points for proper seating and tightness. If the noise persists, consult a qualified mechanic.
- Q: How do I resolve compatibility issues?
- A: Confirm vehicle model compatibility with the accessory. This sensor is designed for Can Am Maverick, Defender, and Commander Max models with OEM part number 705601250. Double-check your vehicle's specific requirements.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Stop Sensor / Brake Switch Pressure Sensor |
| OEM Part Number | 705601250 |
| Compatibility | Can Am Maverick, Defender, Commander Max |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Dimensions (L x W x H) | 20 cm x 10 cm x 10 cm |
| Package Weight | 0.07 kg |
9. User Tips
Based on general user feedback for similar automotive sensors:
- Always use new sealing washers when replacing the sensor to prevent leaks.
- Ensure the electrical connector is clean and free of corrosion before connecting.
- If you are unsure about any step of the installation, it is recommended to consult a professional mechanic or refer to your vehicle's official service manual.
10. Warranty and Support
For specific warranty information, please refer to the seller's terms and conditions at the time of purchase. For technical support or further assistance, please contact the seller directly through the platform where the product was purchased.
A digital version of this user manual is available for download: User Manual (PDF)