XCMT Rear Brake Disc Guard Protector

Contents

XCMT Motorcycle Rear Brake Disc Guard Protector

User Instruction Manual

1. Product Overview

This manual provides essential information for the safe and effective installation, operation, and maintenance of your XCMT Motorcycle Rear Brake Disc Guard Protector. This product is designed to protect your motorcycle's rear brake disc from damage caused by rocks, debris, and other solid objects encountered during riding.

XCMT Rear Brake Disc Guard Protector in various colors and installed on a motorcycle

Figure 1: XCMT Rear Brake Disc Guard Protector (various colors shown)

2. Safety & Warnings

Read all safety information before installation and use. Failure to follow these instructions may result in product damage, property damage, or serious injury.

  • Compatibility: This product is only compatible with specified motorcycle models. Installation on non-compatible vehicles may cause improper fitment, functional failure, or safety hazards. Refer to the 'Compatibility' section for a complete list.
  • Professional Installation: Installation must be performed by a qualified motorcycle technician.
  • Torque Wrench Use: A torque wrench must be used during installation to ensure proper fastener tightness.
  • Pre-Ride Inspection: Inspect the part before every ride. Discontinue use immediately if looseness, deformation, or cracks are detected.
  • Non-OEM Part: This is an aftermarket part. Its performance may differ from original equipment. Carefully assess your intended usage scenario.
  • Modifications: Do not weld, drill, grind, or otherwise modify this product.

3. Setup (Installation Instructions)

Follow these steps carefully for proper installation of your Rear Brake Disc Guard Protector:

  1. Prepare Motorcycle: Park the motorcycle on a level surface and engage the main stand for stability.
  2. Remove OEM Component: Use appropriate tools to carefully remove the original OEM brake disc guard (if present).
  3. Position New Part: Align the new XCMT Rear Brake Disc Guard Protector with the mounting holes on your motorcycle's swingarm.
  4. Insert Fasteners: Insert the included fasteners through the mounting holes.
  5. Tighten Bolts: Tighten all bolts using a torque wrench to the specified torque value. Consult your motorcycle's service manual for the correct torque specifications for brake disc guard mounting bolts.
  6. Avoid Over/Under-Torquing: Never tighten by hand feel. Over-torquing can strip threads; under-torquing may cause the part to detach during riding, leading to safety hazards.
  7. Test Stability: After installation, manually apply pressure to the installed guard to test its stability. Ensure there is no unusual noise, play, or movement.
Rear Brake Disc Guard Protector installed on a motorcycle

Figure 2: Rear Brake Disc Guard Protector installed on a motorcycle

4. Operating Principles

The XCMT Rear Brake Disc Guard Protector functions as a protective barrier. Once correctly installed, it shields the rear brake disc from impacts with rocks, roots, and other trail debris, helping to prevent damage that could compromise braking performance or lead to costly repairs. No specific operational steps are required beyond ensuring it remains securely fastened.

5. Maintenance

Regular maintenance ensures the longevity and effectiveness of your brake disc guard:

  • Fastener Tightness: Check fastener tightness every 500 kilometers or once per month, whichever comes first. Re-tighten to specifications if necessary.
  • Cleaning: Clean the guard with water and a neutral detergent. Avoid using strong acids or alkalis, as these can cause corrosion and damage the anodized finish.
  • Increased Inspection: If the motorcycle is frequently used in off-road, muddy, or salt-spray environments, increase the frequency of visual inspections for damage and fastener checks.

6. Troubleshooting

While the brake disc guard is a passive component, issues can arise:

  • Looseness/Movement: If the guard becomes loose or exhibits unusual movement, immediately check and re-tighten all fasteners to the specified torque. If the issue persists, inspect for damaged threads or mounting points.
  • Deformation/Cracks: If you observe any deformation, cracks, or significant damage to the guard, discontinue use immediately and replace the part. A damaged guard may not provide adequate protection.
  • Improper Fitment: If the guard does not fit correctly or interferes with other motorcycle components after installation, verify compatibility with your specific motorcycle model. Remove the guard if fitment issues cannot be resolved, as improper fitment can lead to safety hazards.

7. Specifications

FeatureDetail
Brand NameXCMT
Material6061-T6 Aircraft Grade Billet Aluminum
Surface FinishAnodized
Item TypeCovers & Ornamental Mouldings
Item Weight0.24 kg
Item Height4 cm
Item Width12 cm
Item Length20 cm
Package Quantity1 Piece
Available ColorsBlack, Blue, Orange, Silver, Red

7.1. Compatibility (Motobike Make)

This Rear Brake Disc Guard Protector is compatible with the following models:

  • For KTM: 125-530 XCW/XCF-W/EXC/EXC-F/SX/SXF/XC/XCF/6 Days/TPI (Years: 2004-2022)
  • For Husqvarna: 125-501 TC/FC/TE/FE models (Years: 2014-2017)
  • For Husqvarna: FC250/350/450 (Years: 2019-2021)
  • For Husaberg: TE/FE 250-570 all (Years: 2009-2014)
  • For GasGas: MX EX/MC 125-300 (Years: 2021-2022)
  • For GasGas: EX F/MC F 250-450 (Years: 2021-2022)

8. Disposal

When the product reaches the end of its lifespan, it should be disposed of as metal/plastic waste through local recycling facilities or authorized waste collection points. Do not dispose of it randomly.

9. Disclaimer

The manufacturer and EU Authorized Representative shall not be held liable for any damage, injury, or accident resulting from:

  • Incorrect or unqualified installation
  • Use beyond the intended scope (e.g., on public roads without E-mark certification, if not explicitly E-marked)
  • Unauthorized modifications
  • Failure to inspect or maintain the product as instructed

This manual may be updated without prior notice. Please refer to the latest version for current information.

10. Warranty & Support

For any warranty claims, technical support, or inquiries regarding this product, please contact the seller directly. Please have your purchase details available when contacting support.

An official PDF version of the product manual, which includes manufacturer and compliance information, can be viewed or downloaded here.

© 2023 XCMT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.