Introduction
Thank you for purchasing the WATTer Lamp, a salt water powered LED emergency lantern. This eco-friendly and portable light source is designed for outdoor activities, emergency preparedness, and general lighting needs where conventional power sources may not be available. Please read this manual carefully before using the product to ensure safe and optimal performance.
Figure 1: The WATTer Lamp, a salt and water powered LED light.
Package Contents
Upon opening the package, please verify that all items are present and undamaged:
- 1 x WATTer Lamp (Salt and Water Emergency LED Lamp)
- 2 x Salt packages (18 grams each)
Product Overview
The WATTer Lamp is a compact and durable lighting solution. Key features include:
- Power Source: Salt water activated, no batteries or charging required.
- Design: Portable, compact (20x10cm), and weather-resistant.
- Material: Durable ABS plastic.
- Eco-Friendly: Contains no harmful chemicals or heavy metals.
- Long-Lasting: Up to 200 hours of intermittent use or 140 hours of continuous use.
Figure 2: Components of the WATTer Lamp.
Setup and First Use
Follow these steps to prepare your WATTer Lamp for use:
- Switch Off: Ensure the ON/OFF switch is in the OFF position.
- Open Ziplock: Open the ziplock strip located at the top of the lamp.
- Add Salt: Carefully add one package of salt (18 grams) into the lamp.
- Add Water: Pour water into the lamp up to the indicated water level line.
- Seal and Shake: Seal the ziplock securely and shake the lamp lightly to mix the salt and water.
- Activate: Wait approximately 2 minutes for the solution to activate before switching the lamp ON.
- Enjoy: Your WATTer Lamp is now ready to provide light.
Figure 3: Visual guide for initial setup.
Operating Instructions
Once activated, operating the WATTer Lamp is straightforward:
- Turning On/Off: Use the ON/OFF switch located on the front of the lamp to control the light.
- Light Intensity: The lamp features 3 LEDs for illumination.
- Reactivation: If the light dims over time, you can add more salt and water (if the existing solution is depleted) or shake the lamp gently to redistribute the solution.
Maintenance and Storage
Proper care will ensure the longevity of your WATTer Lamp:
- Cleaning: Wipe off surface dust or stains promptly after use with a soft, dry cloth. Do not use abrasive cleaners or immerse the lamp in water (beyond its intended internal use).
- After Use: When the WATTer Lamp is no longer needed, drain the liquid solution from the lamp. Rinse the interior with clean water and allow it to dry completely before storage.
- Storage: Store the product in a dry, well-ventilated location away from direct sunlight and extreme temperatures. The lamp can be stored for up to 5 years with proper care.
Troubleshooting
If you encounter issues with your WATTer Lamp, consider the following:
- Lamp Not Lighting Up:
- Ensure the ON/OFF switch is in the ON position.
- Verify that salt and water have been added correctly and mixed.
- Allow 2 minutes for the solution to activate after mixing.
- Check if the water level is sufficient.
- Dim Light:
- The salt solution may be depleted. Drain, rinse, and refill with new salt and water.
- Gently shake the lamp to ensure the solution is evenly distributed.
For persistent issues, please refer to the safety warnings and precautions section or contact customer support.
Safety Warnings and Precautions
WARNING: Read all instructions carefully before using this product. Keep this manual for future reference.
- Intended Use: Do not use the product for any purpose other than its intended use. Misuse may cause injury, damage to the product, or other hazards.
- Children: Keep this product out of the reach of children under 3 years. Small parts may cause a choking hazard. Use under direct adult supervision.
- Disassembly: Do not disassemble, modify, or repair the product yourself. Improper operation may cause electric shock, fire, or product failure. Contact professional maintenance personnel if needed.
- Moisture: Avoid using the product outdoors during heavy rain or in extremely high-humidity environments. While weather-resistant, prolonged exposure to harsh conditions may affect performance.
- Liquids: Avoid contact with liquids other than the intended salt water solution to prevent electric shock.
- Disposal: Dispose of the product and its packaging in accordance with local regulations. Do not discard as household waste.
- Irritation: Contains substances that may cause irritation if misused. Follow instructions strictly.
Specifications
| Feature | Detail |
|---|---|
| Brand | ATUOTIN |
| Type | Campinglight |
| Power Source | Salt Water Activated |
| Material | ABS Plastic |
| Dimensions (H x W) | 20 cm x 10 cm (7.87 in x 3.93 in) |
| Output Power | 100mA |
| Power Consumption | 0.5 Watts |
| Lamp Intensity | 3 LEDs |
| Continuous Use Time | Up to 140 hours |
| Intermittent Use Time | Up to 200 hours |
| Salt Required per Use | 18 grams (approx. 2 teaspoons) |
| Origin | Mainland China |
Figure 4: Product dimensions.
Figure 5: Battery life indications.
User Tips
- For optimal performance, use clean water when activating the lamp.
- Always ensure the ziplock is fully sealed to prevent leaks and maintain solution integrity.
- The WATTer Lamp is designed for reusability. Proper cleaning and drying after each use will extend its lifespan.
- Consider carrying extra salt packets for extended trips or multiple activations.
Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller directly through your purchase platform. Please have your order details ready when contacting support.