1. Introduction
This manual provides essential information for the safe and effective use of your AC 12V/24V Output Voltage 2W Power Transformer. Please read this manual thoroughly before installation and operation, and retain it for future reference.

2. Safety Information
WARNING: Electrical shock hazard. Installation and servicing should only be performed by qualified personnel.
- Always disconnect power before installing or servicing the transformer.
- Ensure the input voltage matches the transformer's rating (220V AC).
- Do not expose the transformer to moisture or extreme temperatures.
- Keep the transformer away from flammable materials.
- Inspect the transformer for any damage before use. Do not use if damaged.
- To avoid danger of suffocation, keep any plastic packaging bags away from babies and children.
3. Product Overview and Features
This power transformer is designed to convert AC 220V input voltage to either AC 12V or AC 24V output voltage, suitable for various low-voltage applications. It features a robust construction for reliable performance.
- High Quality: Brand new and manufactured to quality standards.
- Safe Design: Utilizes a flame-retardant nylon core for enhanced safety.
- Durable Wiring: Features full copper wire, resistant to high temperatures and high voltage.
- Insulated: All transformers are treated with vacuum-impregnated insulation varnish.

4. Specifications
| Parameter | Value |
|---|---|
| Product Name | AC 12V/24V Output Voltage 2W Single Power Transformer |
| Model | GS17393 |
| Brand Name | KKMOON |
| Input Voltage | 220V AC |
| Output Voltage | 12V AC or 24V AC (model dependent) |
| Rated Power | 2W |
| Frequency | 50Hz |
| Core Type | EI |
| Wiring Method | Red wires for Input, Blue wires for Output |
| EU LVD Voltage Compliance | Low voltage: Below 50Vac or 75Vdc |
| Origin | Mainland China |
5. Setup and Installation
Professional installation by a qualified electrician is highly recommended for all electrical components.
- Power Disconnection: Ensure the main power supply to the circuit where the transformer will be installed is completely disconnected.
- Mounting: Securely mount the transformer in a suitable, dry, and well-ventilated location using its integrated mounting tabs.
- Input Wiring: Connect the AC 220V input power supply to the red wires of the transformer. Ensure connections are secure and properly insulated.
- Output Wiring: Connect your low-voltage device or circuit to the blue wires of the transformer. Ensure connections are secure and properly insulated.
- Verification: Double-check all wiring connections for correctness and security before restoring power.
- Power Restoration: Carefully restore power to the circuit and verify the transformer is operating as expected.

6. Operating Instructions
Once properly installed and connected, the transformer operates automatically to convert the input voltage. There are no user-adjustable settings or controls on the transformer itself.
- Ensure the load connected to the output does not exceed the transformer's rated power of 2W.
- Monitor for any unusual noises, smells, or excessive heat during initial operation. If any are detected, immediately disconnect power and inspect the installation.
7. Maintenance
The transformer requires minimal maintenance. Regular checks can help ensure its longevity and safe operation:
- Keep the transformer clean and free from dust and debris.
- Ensure the area around the transformer is clear to allow for proper ventilation.
- Periodically inspect wiring connections for any signs of loosening or corrosion.
- Check the transformer casing for any physical damage or signs of overheating (discoloration, melting).
- Do not attempt to open or repair the transformer yourself. Refer to qualified personnel for any issues.
8. Troubleshooting
If the transformer is not functioning correctly, perform the following basic checks:
- No Output Voltage:
- Verify that the input power supply (220V AC) is active.
- Check all input and output wiring connections for proper contact and security.
- Ensure no short circuits exist in the connected load.
- Overheating:
- Ensure the connected load does not exceed the 2W rating.
- Verify adequate ventilation around the transformer.
- Check for any short circuits in the output wiring or load.
- If problems persist after these checks, consult a qualified electrician.
9. User Tips
While no specific user feedback was available, general tips for using power transformers include:
- Always match the transformer's output voltage to the requirements of your device.
- Consider the total power consumption of all devices connected to the transformer to ensure it does not exceed the 2W limit.
- For permanent installations, use appropriate junction boxes and conduit to protect wiring.
10. Manufacturer & EU Representative Information
Manufacturer:
Company Name: Shanghai Juqian Industrial Co., Ltd
Full Address: No.14, Lane 1900, Minta Road, Shihudang Town, Songjiang District, Shanghai
Email: a171sumaito2841@163.com
Telephone: 86-13476659241
EU Authorized Representative:
AR Company Name: SOLID AUTHORITY LIMITED
Full Address: IE-IE-IE-IE-IE-51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Dublin, Ireland
Email: phoebe8706@gmail.com
Telephone: 33-761441379
11. Compliance Information
This product complies with relevant safety and regulatory standards. For detailed compliance documentation, please contact the manufacturer.
12. Warranty and Support
For warranty information and technical support, please refer to the terms provided by your retailer or contact the manufacturer directly using the contact details provided in Section 10.