Universal Remote Control KB-2104

Contents

User Manual

4-Button 433.92 MHz Universal Copy Remote Control

Model: KB-2104

1. Introduction

This manual provides instructions for the KB-2104 4-button universal copy remote control. Designed for versatility and ease of use, this remote allows you to duplicate signals from various fixed code and learning code remote controls operating at 433.92 MHz. Its high sensitivity and broad compatibility make it an ideal solution for controlling gates, garage doors, and other compatible devices.

Key Features:

  • Multi-function: Personalized and humanized simple design. Supports online programming, can be repeatedly burned and written, has built-in EEPROM, can copy other ordinary remote controls of the same frequency, and can clear code and learn code at any time, which is convenient and fast to use.
  • High Sensitivity: High-performance RF chip is used to stabilize the frequency of crystal oscillator with accurate frequency point. Long transmission distance, no directionality, high transmission sensitivity, no signal blocking.
  • Simple Operation: Most fixed code and learning code can be copied by wireless remote control, with fast copy speed and simple operation. After copying, the original remote control will not be affected. The copy is automatically matched and used directly without coding.

2. Package Contents

Please check the package for the following items:

  • 1 x Copy Remote Controller (KB-2104)

3. Specifications

Parameter Value
Model KB-2104
Color Black
Operating Frequency 433.92 MHz
Channel 4
Battery Type 3V button battery 2032 * 1
Working Mode Copy
Shell Material ABS
Product Size (including shell) Approx. 75.5 * 34.5 * 20.6 mm (2.97 * 1.35 * 0.81 inch)
Net Weight (including shell, excluding key chain) 40g
Working Voltage DC2.4-3.6V
Quiescent Current 0.1uA
Emission Current 17mA
Transmission Power +5-7dBm
Working Temperature -20-70 ℃
Compatible Copy Chips PT2242, PT2260, PT2262, EV1527, 527, PT2240, SMC918, HT-12E, AX5326-3, AX5326-4, AX5026, HT600, HT680, HT6207, HT6010, HT6014, MC145026, HT640, etc.

For more detailed information, you may refer to the User Manual (PDF).

4. Setup Instructions

Before copying, ensure the remote control is cleared of any existing codes.

4.1. Code Clearing Procedure

To clear existing codes from the copy remote control:

  1. Simultaneously press and hold the lock button and the car button on the copy remote control.
  2. Continue holding until the indicator light flashes quickly.
  3. While still holding the car button, briefly press the lock button three times.
  4. The indicator light will flash quickly, confirming the code has been cleared.

Note: If the remote control has checked the code, the code can be checked only after the code is cleared.

4.2. Code Matching (Copying) Procedure

To copy a code from an original remote control to the KB-2104:

  1. Place the original remote control and the copy remote control close to each other.
  2. Press the single key on the original remote control that you wish to copy.
  3. Simultaneously press the corresponding key on the copy remote control.
  4. Hold both keys until the indicator light of the copy remote control changes from flashing to constant light.
  5. Release both remote control keys. The code matching is successful for that key.
  6. Repeat this process for all other keys you wish to copy.

Note: Try to keep the two remote controls close to each other during copying to avoid exceptions.

Diagram showing two remote controls side-by-side with arrows, indicating easy two-step copying.

Image: Easy two-step copying method.

Video: Demonstrates the code clearing and copying procedure.

4.3. Recovery Code Operation

To restore a previously cleared remote control code:

  1. Simultaneously press and hold the unlock button and the ring button on the copy remote control.
  2. Continue holding until the indicator light flashes quickly.
  3. The remote control code that was cleared before will be restored.

5. Operating Instructions

Once the code matching procedure is complete, your KB-2104 remote control is ready for use. Simply press the copied button to operate the corresponding device.

Wide Application: This intelligent copy remote controller is applicable to a variety of devices, including:

  • Battery cars
  • Electric motorcycles
  • Telescopic doors
  • Garage doors
  • Garden sprinkler irrigation systems
  • Fish pond oxygen enrichment systems
  • Security alarms
Diagram illustrating applicable scenarios with icons for storage battery car, electric garage door, telescopic door, and security alarm.

Image: Applicable scenarios for the remote control.

Diagram showing scope of application for battery car, electric motorcycle, telescopic door, garage door, garden sprinkler irrigation, fish pond oxygenation, and highlighting high sensitivity.

Image: Multi-purpose application scope and high sensitivity.

6. Maintenance

To ensure optimal performance and longevity of your remote control, please observe the following:

  • Battery: The remote control uses a 3V button battery (CR2032). Replace the battery when the remote's performance degrades or the indicator light does not illuminate.
  • Environmental Conditions: Do not use the remote control in a humid environment, as this may cause damage.
  • Cleaning: Wipe the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

7. Troubleshooting

If you encounter issues with your remote control, please refer to the following common problems and solutions:

  • Remote not copying/indicator light not responding:
    • Ensure the battery voltage is within the operating range (DC2.4-3.6V).
    • Make sure the original remote and copy remote are held very close during the copying process.
    • Verify that the code clearing procedure was performed successfully before attempting to copy.
    • Check if the original remote control is working correctly.
  • Reduced transmission distance:
    • This can occur in environments with large wireless interference. Try operating in a different location.
    • Ensure the battery has sufficient power.
  • Remote not working after copying:
    • Confirm that the indicator light changed from flashing to constant during the copying step.
    • Re-attempt the code matching procedure, ensuring all steps are followed precisely.

8. User Tips

  • Always test the copied remote control immediately after programming to ensure successful duplication.
  • Keep your original remote control in a safe place as a backup.
  • If you have multiple devices, consider labeling the buttons on your copy remote for easy identification.

9. Warranty and Support

We strive to provide each customer with the highest standard of customer service. If you have any issues, inquiries, or need assistance with your KB-2104 remote control, please feel free to contact the seller directly for support.

For additional information, you can also refer to the official User Manual (PDF).

© 2024 Universal Remote Control. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.