VIEWI new008

Contents

VIEWI Small Size LED Filament Bulb E14 User Manual

Model: new008

Brand: VIEWI

1. Introduction

This manual provides essential instructions for the safe and efficient use of your VIEWI Small Size LED Filament Bulb. Please read this manual carefully before installation and operation to ensure proper functionality and longevity of your product.

Three VIEWI LED filament bulbs of different sizes, showcasing their compact design.
Figure 1: VIEWI Small Size LED Filament Bulbs (various sizes)

2. Safety Information

  • Always turn off the power supply at the main switch or circuit breaker before installing, replacing, or cleaning the bulb.
  • Do not disassemble, modify, or attempt to repair the bulb. This may void the warranty and pose a safety risk.
  • Ensure the bulb's voltage (110V or 220V) and wattage (2W or 3W) are compatible with your lamp fixture and electrical system. The bulb supports an input voltage range of AC100V-285V.
  • Avoid touching the bulb when it is operating or immediately after turning it off, as it may be hot. Allow sufficient time for cooling.
  • This bulb is designed for indoor use only in dry locations. Do not expose to moisture or extreme temperatures.
  • Dispose of old bulbs according to local regulations.

3. Installation

Follow these steps to safely install your LED filament bulb:

  1. Turn off Power: Locate the light switch or circuit breaker controlling the lamp fixture and turn off the power supply completely. This is crucial for your safety.
  2. Remove Old Bulb: Carefully unscrew and remove the old light bulb from the E14 lamp holder.
  3. Install LED Bulb: Gently screw the new VIEWI LED filament bulb into the E14 lamp holder in a clockwise direction until it is secure. Do not overtighten, as this can damage the bulb or fixture. The bulb is designed for AC100V-285V input, connecting to Live (L) and Neutral (N) terminals.
  4. Restore Power: Once the bulb is securely installed, turn on the power supply at the main switch or circuit breaker.
  5. Test: Flip the light switch to turn on the bulb and verify its operation.

4. Operating Instructions

The VIEWI LED Filament Bulb is designed for simple operation:

  • Turning On/Off: Use your existing wall switch or fixture switch to turn the bulb on or off.
  • Dimming Functionality: This bulb supports dimming. If you have a compatible LED dimmer switch installed, you can adjust the dimmer to achieve your desired brightness level. Ensure your dimmer is specifically designed for LED lighting to prevent flickering or damage.
Series of six circular images demonstrating the dimming capability of the LED bulb, showing light intensity gradually decreasing from bright to very dim.
Figure 2: Dimming demonstration of the LED bulb.
Comparison images showing the light output of 2W and 3W LED bulbs, and also demonstrating warm white and cool white color temperatures.
Figure 3: Light output comparison for 2W and 3W bulbs in warm white and cool white.

Video 1: Product demonstration showing the bulbs rotating and their light output in different color temperatures.

5. Maintenance

  • Cleaning: Ensure the bulb is off and completely cool before cleaning. Gently wipe the glass surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these can damage the bulb.
  • Replacement: When the bulb reaches the end of its lifespan (approximately 5000 hours), turn off the power, allow it to cool, and replace it following the installation steps outlined in Section 3.

6. Troubleshooting

Bulb does not light up:
  • Check if the power supply to the fixture is turned on at the wall switch and main circuit breaker.
  • Ensure the bulb is screwed into the E14 lamp holder correctly and securely. A loose connection can prevent it from lighting.
  • Verify that the lamp holder itself is functioning correctly by testing it with another known working bulb.
  • If using a dimmer, ensure it is compatible with LED bulbs and set to an appropriate brightness level (not at the lowest setting, which might be off for some dimmers).
Bulb flickers or dims inconsistently:
  • Ensure the bulb is screwed in tightly to the fixture.
  • If using a dimmer, confirm that it is an LED-compatible dimmer. Standard incandescent dimmers may cause flickering or damage to LED bulbs.
  • Check for loose wiring in the fixture or wall switch. If you suspect wiring issues, consult a qualified electrician.

7. Specifications

Feature Detail
Brand Name VIEWI
Model Number new008
Item Type LED bulbs (Candle Bulb)
Lamp Base Type E14
Power Source DC
Working Voltage 110V / 220V (AC100V-285V range)
Wattage Options 2W, 3W
Luminous Flux 2W: 200Lm, 3W: 300Lm
Color Temperature Warm White (2800K-3000K), White (5500K-6000K)
Beam Angle 360°
LED Chip Brand Epistar
LED Chip Model 1W HIGH POWER (4 chips)
Average Life 5000H
Material Glass
Product Dimensions (approx.) Length: 47mm or 60mm, Diameter: 14mm
Product Weight 30g
Certification CE, ROHS
Dimensions of two LED filament bulbs: one is 47mm long, the other is 60mm long, both with a 14mm diameter.
Figure 4: Product Dimensions.

8. User Tips

  • For optimal dimming performance and to avoid flickering, always use an LED-compatible dimmer switch. Traditional incandescent dimmers may not work correctly with LED bulbs.
  • Consider the color temperature (Warm White for a cozy ambiance, White for brighter task lighting) to best suit the mood and function of your space.
  • These small E14 bulbs are particularly well-suited for decorative fixtures, chandeliers, and accent lighting where their compact size and filament design can enhance the aesthetic.

9. Warranty and Support

For any issues, questions, or warranty claims regarding your VIEWI LED Filament Bulb, please contact the seller or manufacturer directly. It is recommended to keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is also available for download, which may contain additional information: VIEWI LED Bulb User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.