1. Introduction
This manual provides detailed instructions for the MiBoxer 2.4GHz RF Wireless Single Color LED Controller (Model FUT036S) and its compatible remote panels (Models ESR2T and K4). This product utilizes advanced 2.4GHz wireless technology, offering low power consumption, long signal transmission, and strong anti-interference capabilities. It features an auto-transmitting function, making it suitable for controlling single color LED lighting in various environments, including hotel and home lighting.
The controller allows for brightness adjustment and smooth transitions without flicker, enhancing your lighting experience.
2. Safety Information and Attention
Please read and understand the following safety precautions before installation and operation:
- Voltage Compatibility: Always ensure that the power supply voltage matches the requirements of the LED light. Incorrect voltage or wiring (N and L connections) can damage the light.
- Power Off During Wiring: Turn off the main power supply before wiring any cables. Ensure all connections are correct and there are no short circuits before turning the power back on.
- No Disassembly: Do not attempt to disassemble or modify the lighting fixtures or controller if you are not a qualified expert. Unauthorized disassembly may void the warranty and pose safety risks.
- Environmental Conditions: Avoid using the device in humid or high-temperature environments for extended periods.
- Electromagnetic Interference: Do not use the device in areas with large metal surfaces or strong electromagnetic waves nearby, as this can significantly affect the remote control distance and signal transmission.
- Battery Handling (for K4/ESR2T panels): If the remote panel will not be used for a long time, remove the CR2032 battery and store it in a dry, static-free environment.
3. Package Contents
The package typically includes:
- 1x FUT036S Single Color LED Controller
- 1x Remote Panel (ESR2T-W, ESR2T-B, K4-W, or K4-B, depending on your selection)
4. Specifications
FUT036S Single Color LED Controller
| Parameter | Value |
|---|---|
| Model No. | FUT036S |
| Input Voltage | DC12-24V |
| Output | Max 12A |
| RF | 2.4GHz |
| Control Distance | 30m |
| Working Temperature | -10~40°C |
| Output Connection | Common anode |
| Material | ABS |
| Certification | CCC, CE, EMC, FCC, LVD, ROHS, UL |
K4 4-Zone Wireless Dimming Panel
| Parameter | Value |
|---|---|
| Product Name | 4-Zone Wireless Dimming Panel (2.4GHz) |
| Model No. | K4 |
| Input Voltage | 3V (CR2032*1PCS) |
| Transmitting Power | 6dBm |
| RF | 2.4GHz |
| Control Distance | 30m |
| Working Temperature | -10~40°C |
| Standby Power Consumption | <6μA |
| IP Rating | IP20 |
| EMC Standard (EMC) | ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.1.1 |
| Safety Standard (LVD) | EN 61347-1:2015+A1:2018, EN 61347-2-11:2001+A1:2019, EN 62493:2015+A1:2022 |
| Radio Equipment (RED) | ETSI EN 300 440 V2.2.1 |
| Certification | CE, EMC, LVD, RED |
ESR2T 2-Gang Panel Remote
| Parameter | Value |
|---|---|
| Product Name | 2 GANG Panel Remote |
| Model No. | ESR2T |
| Type | 2 GANG |
| Input Voltage | 100V~240V~50/60Hz |
| Standby Power | <0.4W |
| Transmitting Power | 6dBm |
| RF | 2.4GHz |
| Control Distance | 30m |
| Working Temperature | -10~40°C |
| IP Rate | IP20 |
| EMC Standards (EMC) | ETSI EN301 489-1 v 2.2.3, ETSI EN 301 489-3 v 2.3.2 |
| Safety Standard (LVD) | EN 61347-2-11:2001+A1:2019, EN 61347-1:2015+A1:2021, EN 62493:2015+A1:2022 |
| Radio Equipment (RED) | ETSI EN 300 400 V2.2.1 |
| Certification | CE, EMC, LVD, RED |
5. Setup and Installation
5.1 FUT036S Controller Installation
Follow these steps to install the FUT036S controller:
- Wire the necessary cables (input V+, V- and output LED+, LED-) to the controller.
- Fix the controller base onto the bottom case using screws.
- Put the cover back on.
5.2 K4 4-Zone Wireless Dimming Panel Installation
The K4 panel is battery-powered (CR2032) and requires no wiring for installation:
- Remove the up cover of the panel.
- Insert the CR2032 battery into its compartment.
- Return the up cover.
- Tear off the back tape from the holder.
- Stick the holder onto the desired wall position.
- Put the rotating switch onto the front of the holder.
5.3 ESR2T 2-Gang Panel Remote Wiring
The ESR2T panel requires AC100-240V input wiring:
6. Operating Instructions
6.1 Linking Code Instructions (FUT036S with Remote)
- Turn off the light. Wait 10 seconds, then turn it on again.
- Within 3 seconds of turning the light on, short press the "I" button on the remote 3 times.
- The light will blink 3 times slowly, indicating successful linking.
6.2 Unlinking Code Instructions (FUT036S with Remote)
- Turn off the light. Wait 10 seconds, then turn it on again.
- Within 3 seconds of turning the light on, short press the "I" button on the remote 5 times.
- The light will blink 10 times quickly, indicating successful unlinking.
6.3 Linking Code Instructions (K4/ESR2T Panel)
- Turn off the light. Wait 10 seconds, then turn it on again.
- Within 3 seconds of turning the light on, short press the "Zone" button on the panel 6 times.
- The light will blink 3 times slowly, indicating successful linking.
6.4 Unlinking Code Instructions (K4/ESR2T Panel)
- Turn off the light. Wait 10 seconds, then turn it on again.
- Within 3 seconds of turning the light on, short press the "Unlink" button on the panel 5 times.
- The light will blink 10 times quickly, indicating successful unlinking.
6.5 Dimming Control (K4/ESR2T Panels)
- Short Press: To turn the light ON/OFF.
- Long Press: To adjust the light brightness.
- The panels support 4 sets of independent control, allowing for an unlimited number of lamps to be controlled.
- Human Presence Sensor (ESR2T): The indicator on the panel will light up upon detecting human activity and will recover its previous brightness once human presence is no longer detected.
- Bias Light Brightness (ESR2T): While 2 zones are in OFF status, long press "ON/OFF" to change the brightness of the bias light. Release your finger to confirm the brightness.
- Brightness Direction (ESR2T): Long press ON/OFF every time to change the direction of brightness dimmable (incremental or decrease).
6.6 PWM High Frequency / Low Frequency Switching
This feature allows switching between high and low frequency modes for the LED controller.
Switch to High Frequency:
- Ensure the light is ON.
- Short press the "OFF" button of the remote control once.
- Short press the "ON" button 5 times within 3 seconds. The white light will blink 2 times quickly, indicating successful switching to high frequency.
Switch to Low Frequency:
- Ensure the light is OFF.
- Short press the "ON" button of the remote control once.
- Short press the "OFF" button 5 times within 3 seconds. The white light will blink 2 times slowly, indicating successful switching to low frequency.
6.7 "Do Not Disturb" Mode
This mode can be activated or deactivated via remote control, useful in areas with frequent power failures to save energy.
To Turn On "Do Not Disturb" Mode:
- Press the "OFF" button three times within three seconds.
- Then press the "ON" button three times.
- Activation is successful once the LED light flashes four times quickly.
Attention: Once activated:
- If the light is OFF: When you turn off power and turn it on again, the light will remain OFF. You must turn off and turn on power twice or use the app/remote to activate the light.
- If the light is ON: When you turn off power and turn it on again, the light will remain ON.
To Turn Off "Do Not Disturb" Mode:
- Press the "ON" button three times within three seconds.
- Then press the "OFF" button three times.
- Deactivation is successful once the LED light flashes four times slowly.
Attention: If you turn on and turn off power once after closing "Do Not Disturb" mode, the light will always be "ON" status.
6.8 Signal Transmitting
One lighting fixture can transmit signals from the remote control to another lighting fixture within 30m. As long as there is a lighting fixture within 30m, the remote control distance can be limitless, effectively extending the control range.
6.9 Smartphone App Control and Third-Party Voice Control
The MiBoxer system supports smartphone app control and integration with third-party voice control assistants (e.g., Amazon Alexa, Google Assistant). A 2.4GHz gateway (sold separately) is required for these features.
Scan the QR codes below for video instructions on smartphone app control (WL-Box1 video) and third-party voice control:
6.10 Compatible Remote Controls (Purchased Separately)
The FUT036S controller is compatible with a range of MiBoxer/Mi-Light 2.4G series remote controls and panels, including:
- FUT006, FUT007
- FUT087 / FUT087-B
- B1 / B1-B / T1, B2 / T2
- K1 / K1-B, K2 / K2-B, K3
- C1
- S1-B / S1-W / S1-G
- WL-Box1 (Gateway for app/voice control)
7. Maintenance
- Keep the device clean and dry.
- Avoid exposing the device to direct sunlight or extreme temperatures.
- For battery-powered remotes (like K4), replace the CR2032 battery when the control range decreases or the device becomes unresponsive.
- If the device will not be used for an extended period, remove batteries from remote panels to prevent leakage.
8. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the official manual for the most accurate and up-to-date information.
9. Troubleshooting
- Linking Failure: If the light does not blink as expected during the linking process, repeat the linking steps carefully. Ensure the light is turned off for 10 seconds before turning it back on and attempting to link within 3 seconds. Note that a light that has already been linked cannot be linked again without first unlinking it.
- Unlinking Failure: If the light does not blink quickly during the unlinking process, repeat the unlinking steps. Note that a light that has never been linked does not need to be unlinked.
- Reduced Remote Distance/Signal Issues: Ensure the controller and remote are not located near large metal areas or sources of strong electromagnetic interference. These can significantly reduce the effective control distance.
- Light Not Functioning: Double-check all wiring connections, especially the voltage, N, and L connections, and ensure there are no short circuits. Confirm the power supply is on and compatible with the light's voltage.
- Panel Unresponsive (K4): Check and replace the CR2032 battery if the panel is not responding.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase.
For further detailed information, diagrams, and support, you may refer to the official user manual PDF available at: MiBoxer User Manual (PDF).