1. Introduction
The UGREEN Bluetooth 5.0 Transmitter and Receiver is a versatile 2-in-1 wireless audio adapter designed to enhance your audio experience. This device supports both Bluetooth transmitting (TX) and receiving (RX) modes, allowing you to convert non-Bluetooth audio sources into Bluetooth-enabled ones, or enable non-Bluetooth speakers/headphones to receive Bluetooth audio. It features stable Bluetooth 5.0 connectivity, dual device pairing, and a compact design, making it ideal for a wide range of applications including TVs, PCs, home theaters, car stereos, headphones, and speakers.

2. Warning & Safety Information
- Use only the original power adapter. Do not use incompatible power supplies to avoid damage.
- Keep ventilation holes unobstructed during operation. Keep away from high temperature, humidity, dust, and strong electromagnetic interference.
- Do not disassemble or modify the device; this may cause short circuit, electric shock, or fire hazard.
- Disconnect power before wiring or plugging/unplugging to prevent port damage.
- For indoor use only. Do not use outdoors, in wet, rainy, or flammable and explosive environments.
3. Setup Instructions
This device is plug and play, requiring no complex configuration. Follow these steps for initial setup:
3.1. RX Mode (Receiver) Setup
- Slide the TX/RX switch to the "RX" position.
- Insert the adapter into the AUX port of your Bluetooth receiver device (e.g., a speaker, car stereo).
- Press and hold the multifunction button for 3 seconds to power on and enter pairing mode.
- Enable Bluetooth on your phone or other audio source, search for "UGREEN-80893", and click to connect.


3.2. TX Mode (Transmitter) Setup
- Slide the TX/RX switch to the "TX" position.
- Insert the adapter into the AUX port of your audio source device (e.g., TV, PC, MP3/MP4 player).
- Press and hold the multifunction button for 3 seconds to power on and enter pairing mode.
- Turn on your receiving Bluetooth devices (e.g., Bluetooth earphones, speakers) to enter their pairing mode. The adapter will automatically pair with and connect to your device.

4. Operating Instructions
The UGREEN Bluetooth adapter offers versatile operation in both receiver (RX) and transmitter (TX) modes, including dual device pairing.
4.1. General Operation
- Power On/Off: Press and hold the multifunction button for 3 seconds.
- Mode Switching: Use the TX/RX slide switch on the side of the adapter to select the desired mode.
- Pairing: After powering on, the adapter automatically enters pairing mode (indicated by a flashing blue light).
4.2. RX Mode Specifics (Receiving Audio)
In RX mode, the adapter receives audio from a Bluetooth-enabled device (like a smartphone) and outputs it to a non-Bluetooth device (like a speaker or car stereo).
- Connecting to a Car Stereo: Plug the adapter into your car's AUX port. Pair your smartphone via Bluetooth to the adapter for hands-free calls and voice navigation.
- Dual Phone Connection: If you wish to connect two mobile phones simultaneously in RX mode:
- First, connect Phone A to the adapter.
- Once connected, temporarily turn off Bluetooth on Phone A.
- Connect the adapter to Phone B via Bluetooth.
- Turn on Bluetooth on Phone A again; it will automatically reconnect to the adapter.

4.3. TX Mode Specifics (Transmitting Audio)
In TX mode, the adapter transmits audio from a non-Bluetooth device (like a TV or PC) to Bluetooth-enabled headphones or speakers.
- Connecting to a TV: Plug the adapter into your TV's audio output (3.5mm AUX). Pair your Bluetooth headphones to the adapter to enjoy TV audio wirelessly.
- Dual Headphone Connection: To connect two Bluetooth headphones simultaneously in TX mode:
- First, connect one pair of headphones to the adapter.
- Short press the multifunction button twice to enter pairing mode (a blue light flashes twice per second).
- Turn on the second pair of Bluetooth headphones to enter their pairing mode. The adapter will connect to both.


5. Maintenance
- Slight surface heating during operation is normal. Do not cover or place heavy objects on the device.
- Clean with a dry cloth when powered off. Do not allow liquids to enter the case.
- Avoid strong vibration or dropping.
- Disconnect power if the device is not used for a long time.
6. Troubleshooting (FAQ)
- No power / No connection: Check power and cable connections, change ports or cables, restart the device.
- Only 1G speed: Confirm network card and cable support 2.5G, check uplink device speed limits.
- SFP+ port not working: Use 10G SFP+ module/cable, reinsert, check the peer device supports 10G.
- Frequent disconnection: Improve ventilation, check power and cables, avoid network loops.
7. Specifications
| Attribute | Value |
|---|---|
| Product Name | Bluetooth 5.0 Transmitter and Receiver |
| Model Number | CM403-80893 |
| Bluetooth Version | Bluetooth 5 |
| Audio Output | 3.5mm |
| Support vehicle-mounted | Support |
| Antenna Type | External |
| USB Interface | USB1.0 |
| Package | Yes |
| Origin | Mainland China |
Compatible devices: Routers, ONTS, NAS, PCs, IP cameras, and other standard Ethernet devices.
8. User Tips
- Always ensure both the adapter and the device you are trying to connect are in pairing mode for successful connection.
- For optimal audio quality and stable connection, keep the adapter within a reasonable range of the connected Bluetooth device.
- If experiencing connection issues, try restarting both the adapter and the connected device.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official UGREEN website or contact their customer service. A comprehensive user manual in PDF format is also available for download: View User Manual (PDF).