Honor 600 Pro Smartphone User Manual

1. Introduction

This manual provides detailed instructions for using your Honor 600 Pro smartphone. Please read it carefully to ensure proper operation and to take full advantage of its features.

Honor 600 Pro phone with key features listed: Snapdragon 8 Elite, 6.57 inch 120Hz AMOLED, 200MP camera, 7000mAh 80W wired + 50W wireless.

Figure 1: Honor 600 Pro Key Features Overview

Key Specifications

Processor: Snapdragon® 8 Elite
Display: 6.57-inch AMOLED, 2728*1264 pixels resolution, 120Hz refresh rate
RAM: 12GB
Storage: 256GB or 512GB ROM options
Rear Camera: 200MP + 50MP + 12MP
Front Camera: 50MP
Operating System: MagicOS 10.0 (based on Android 16)
Battery: 7000mAh, 80W SuperCharge (wired), 50W Wireless Charge
Connectivity: 5G, LTE, HSPA, GSM, Bluetooth 6.0, NFC, Wi-Fi
Durability: IP68/IP69K Water Resistance
Security: Fingerprint Unlock, Face Recognition

Honor 600 Pro features: AI Image to Video 2.0, 7000mAh Long-Lasting Battery, 8000nits Ultra-High Brightness Screen, 200MP AI Night Ultra-Clear Portrait.

Figure 2: Honor 600 Pro Highlighted Features

2. Initial Setup

2.1 Powering On/Off and Restarting

**Power On:** Press and hold the Power button for a few seconds until the HONOR logo appears.
**Power Off:** Simultaneously press and hold the Power button and Volume Up button, then tap 'Power Off' on the screen.
**Restart:** Simultaneously press and hold the Power button and Volume Up button, then tap 'Restart' on the screen.
**Force Restart:** If the phone is unresponsive, press and hold the Power button for approximately 10 seconds until it restarts.

2.2 Charging Your Phone

When the battery is low, the phone will prompt you to charge it. To avoid automatic shutdown due to low battery, charge your phone promptly.

Wired Charging (80W SuperCharge)

Connect the provided Type-C cable to your phone and the HONOR SuperCharge Charger.
Plug the charger into a power outlet.

Wireless Charging (50W)

Place your phone on a compatible wireless charger. Ensure the phone is centered on the charging pad for optimal performance.

Wireless Reverse Charging

Your Honor 600 Pro supports wireless reverse charging, allowing you to charge other compatible devices (e.g., other phones, smartwatches, earbuds) wirelessly. Ensure your phone's battery is above 20% before using this feature.

Go to Settings > Battery and enable Wireless Reverse Charging.
Turn on the device to be charged and place it on the center of your Honor 600 Pro's back. Avoid placing metal objects between the two devices.
If charging does not start within 5 seconds, adjust the position and try again.
If the charged device is moved away for more than 2 minutes during charging, wireless reverse charging will automatically turn off.

Battery Status Indicators

Table 1: Battery Icon Meanings
Battery Icon	Battery Status
	Battery level below 10%
	Battery level between 10% and 20%
	Charging, battery level between 20% and 90%
	Charging, battery level above 90%
	Battery fully charged (100%)

2.3 Data Transfer from Old Device

Using Phone Clone

Phone Clone allows you to quickly transfer basic data (contacts, calendar, photos, videos, etc.) from your old phone to your new Honor 600 Pro.

On your new Honor 600 Pro, open the Phone Clone app or go to Settings > System & Updates > Phone Clone, then select 'This is the new device' and choose your old device type.
On your old device, download and install the Phone Clone app as prompted.
On your old device, open the Phone Clone app, select 'This is the old device', and establish a connection with your new phone by scanning a QR code or manual connection.
On your old device, select the data you want to transfer and tap 'Next' to start the transfer.

Note: Phone Clone supports Android 7.0 and above, and iOS 8.0 and above.

Using OTG to Transfer Data from iOS Devices

For iOS devices, using a data cable for transfer is recommended for faster and more efficient data migration.

On your new Honor 600 Pro, open Phone Clone, select 'This is the new device' > 'Apple device' > 'Wired transfer'.
Prepare a compatible Lightning-USB-C cable or USB-C-to-USB-C cable/adapter. Connect your iOS device to your Honor 600 Pro and tap 'Trust' on the screen.
On your iOS device, select the data to export and follow the on-screen instructions.

2.4 SIM Card Management

Physical SIM Cards

Your Honor 600 Pro supports dual SIM cards. You can set a default data card and default call card, or enable dual SIM call forwarding.

Go to Settings > Mobile Network > SIM Card Management.
Set SIM Card 1 or SIM Card 2 as the default data card and call card.

eSIM (Embedded-SIM)

The Honor 600 Pro supports eSIM, a virtual SIM card that replaces physical SIM cards. It offers the convenience of binding multiple numbers to a single slot and switching between carriers freely.

Activating an eSIM

Contact your carrier to activate an eSIM plan. You will need to provide your device's EID (Embedded-SIM ID), found in Settings > About Phone > EID.
Go to Settings > Mobile Network > SIM Card Management.
Tap next to SIM Card 2 (if applicable) and choose one of the following methods to add an eSIM:

**Scan QR Code:** Scan the QR code provided by your carrier.
**Scan Image:** If you have the QR code saved as an image, select it from your gallery.
**Enter Activation Code:** Manually enter the activation code provided by your carrier.

Enabling/Disabling an eSIM

In SIM Card Management, tap next to SIM Card 2 and toggle the switch to enable or disable the eSIM.

Deleting an eSIM

Before deleting an eSIM, ensure it is disabled. In SIM Card Management, tap next to SIM Card 2 and select 'Delete eSIM'. Note that deleting an eSIM does not cancel your contract with the carrier.

2.5 Connecting to Networks

Wi-Fi Connection

Go to Settings > Wi-Fi and turn on the Wi-Fi switch.
Select your desired Wi-Fi network from the list. If it's a secured network, enter the password.
Alternatively, you can scan a QR code provided by another device sharing its Wi-Fi network.

Mobile Data (5G)

Your Honor 600 Pro supports 5G connectivity, offering higher data transfer speeds and lower latency compared to 4G networks.

Ensure your SIM card has an active mobile data plan.
To enable mobile data, swipe down from the top right of the screen to open the Control Center and tap the Mobile Data icon. Alternatively, go to Settings > Mobile Network > Mobile Data and turn on the switch.
To enable 5G, go to Settings > Mobile Network > Mobile Data > Advanced and enable the Dual SIM 5G switch (if using dual SIMs).

Bluetooth Connection

Go to Settings > Bluetooth and turn on the Bluetooth switch.
Select the device you want to pair with from the list of available devices and follow the on-screen instructions.

3. Operating Your Device

**Return to previous screen:** Swipe inward from the left or right edge of the screen.
**Return to home screen:** Swipe up from the bottom center edge of the screen.
**Access recent tasks:** Swipe up from the bottom center edge of the screen and pause.
**Close a single task:** In the recent tasks interface, swipe up on an app card.
**Switch between apps:** Swipe horizontally along the bottom edge of the screen.

Go to Settings > System & Updates > System Navigation and select Three-key navigation.

Tap □: Return to the previous screen or exit the app.
Tap ◯: Return to the home screen.
Tap ◻: Access recent tasks.

3.2 Home Screen and Personalization

Understanding the Home Screen

View phone status and notifications from the top status bar.
Swipe left or right to view app screens, home screen cards, and widgets.
Pinch in on the home screen to enter home screen settings and change the layout style.

Service Cards

Service cards provide quick access to important information and frequently used functions without opening apps. To add a service card, pinch in on the home screen, tap 'Home Screen Cards', select a card (e.g., Calendar, Weather), choose a style, and tap 'Add to Home Screen'.

Large Folders

Organize apps into large folders for easy access. To convert a small folder to a large folder, long-press the small folder and tap 'Display as Large Folder'.

Control Center

Swipe down from the top right of the screen to open the Control Center for quick access to shortcuts and settings. Swipe down from the top center or left to open the Notification Panel.

3.3 Notifications and Volume

Managing Notifications

**View Notifications:** When a notification arrives, unlock the screen and swipe down from the status bar.
**Clear Notifications:** Swipe right on a notification to clear it, or tap the 'Clear All' icon at the bottom of the notification panel.
**Do Not Disturb:** Swipe left on a notification, then tap the settings icon to set it as default, turn it off, or access more settings.

Adjusting Volume

**Volume Buttons:** Use the Volume Up or Volume Down buttons to adjust media volume.
**Sound Modes:** Swipe down from the top right to open the Control Center, then tap the Sound icon to switch between Sound, Silent, or Vibrate modes.
**Mute with Power Button:** When a call or alarm rings, press the Power button to quickly mute it.
**Flip to Mute:** Go to Settings > Accessibility > Shortcuts & Gestures > Mute/Reduce Volume and enable 'Flip to mute phone'.
**Raise to Reduce Volume:** Go to Settings > Accessibility > Shortcuts & Gestures > Mute/Reduce Volume and enable 'Raise phone to reduce volume'.

3.4 Smart Sensing and AI Features

Air Gestures

Use air gestures to scroll the screen without touching it.

**Enable:** Go to Settings > HONOR AI > Air Gestures > Air Scroll Screen and turn on the switch.
**Scroll Down:** With five fingers together, palm facing the front camera (30-50cm away), point fingertips up. When the icon appears, wave your wrist down.
**Scroll Up:** With five fingers together, back of hand facing the front camera (30-50cm away), point fingertips down. When the icon appears, wave your wrist up.
**Scroll Left/Right:** Similar gestures for left/right scrolling.

Diagram showing correct and incorrect hand positions for air gestures.

Figure 3: Air Gesture Guidance

Gaze Screen On/Off

The screen stays on while you are looking at it and dims when you look away. Enable in Settings > HONOR AI > Smart Sensing > Gaze Screen On/Off.

Gaze Volume Reduction

When a call comes in, you can reduce the ringtone volume by looking at the screen. Enable in Settings > HONOR AI > Smart Sensing > Gaze Volume Reduction.

AI Key

The AI Key provides quick access to frequently used functions. Customize its actions in Settings > HONOR AI > AI Key.

AI Subtitles

Converts audio from videos or conversations into real-time text subtitles, supporting multiple languages and translation. Enable in Settings > HONOR AI > AI Subtitles.

3.5 Multi-Window and Floating Window

The Honor 600 Pro supports multi-window and floating window modes for enhanced multitasking.

Opening a Floating Window

Swipe inward from the left or right edge of the screen and pause to bring up the AI sidebar. Tap an app to open it in a floating window.

Split Screen

When using an app in full screen, swipe up from the bottom edge of the screen and pause, then release. The current app will shrink to one side, and you can select another app to open in split screen.

4. Camera and Imaging

4.1 Basic Photography

Launching the Camera

From the home screen, tap the Camera app icon.
From the lock screen, swipe up from the bottom right corner of the screen.
When the screen is off or locked, quickly press the Volume Down button twice to launch the camera and take a quick shot.

Adjusting Camera Settings

In the camera interface, you can adjust various settings for optimal photos:

**Grid Lines:** Enable grid lines to help with composition.
**Self-Timer:** Set a delay before taking a photo.
**Silent Mode:** Turn off the shutter sound.
**Smile Capture:** Automatically takes a photo when a smile is detected.
**Horizontal Level:** Displays a horizontal line to ensure your phone is level.
**Location Tag:** Enable to add location information to your photos and videos.

4.2 Shooting Modes

Panorama

Go to Camera > More and select Panorama. Follow the on-screen guide to move your phone and capture a wide panoramic shot.

Portrait Mode

Tap Portrait mode in the camera interface. You can apply beauty effects, bokeh, and filters. Switch between front and rear cameras as needed.

Night Mode

For low-light conditions, select Night mode. Hold your phone steady during the exposure time for brighter and clearer photos.

AI Ultra-Clear Portrait

This mode uses AI to enhance portrait details. Select Portrait mode and enable the AI Ultra-Clear Portrait feature.

Gesture Shooting

When using the front camera, raise your palm towards the screen to trigger a photo. Enable this in Camera > Settings > Smart Shooting > Gesture Photo.

AI Super Telephoto

For distant subjects, use AI Super Telephoto mode. Zoom in on the subject, and the camera will automatically enhance details. This feature is particularly useful for landscapes and architecture.

Dynamic Photos

Capture short video clips before and after a photo. To enable, tap the Dynamic Photo icon in the camera interface.

4.3 Video Recording

Time-Lapse Video

Go to Camera > More and select Time-Lapse. Set your phone on a stable surface and tap the shutter button to start recording.

Multi-Lens Video

Record videos using multiple lenses simultaneously. Go to Camera > More and select Multi-Lens Video. You can choose different lens combinations, such as front/rear split screen or picture-in-picture.

Slow Motion Video

Go to Camera > More and select Slow Motion. Choose the desired slow-motion speed (e.g., 4X, 8X) and record. You can edit the slow-motion segment after recording.

4K High-Definition Video

Your Honor 600 Pro supports 4K video recording for superior clarity. In video mode, tap the resolution settings and select 4K.

5. Smart Connectivity (MagicRing)

MagicRing technology enables seamless collaboration between your Honor devices (phone, tablet, PC) when logged in with the same Honor account. This allows for efficient workflow and convenient access to information and services across devices.

To enable Smart Connectivity, go to Settings > Smart Connectivity. Ensure Wi-Fi and Bluetooth are enabled on all devices.

5.1 Trust Ring

The Trust Ring displays all connected devices and their available services. You can drag service cards between device icons to transfer services.

Accessing the Trust Ring

Swipe down from the top right of the screen to open the Control Center, then tap the Trust Ring card.

5.2 App Continuity

Continue tasks seamlessly across devices. For example, edit a document on your phone and continue on your PC.

How to Use App Continuity

Swipe up with three fingers from the bottom of an app screen to enter the Trust Ring interface. Drag the app's task card to the desired device to continue.

Answer or make calls from your connected tablet or PC. When a call comes in on your phone, you can choose to answer it on any connected device.

Receive and manage phone notifications (messages, alarms, social media) on your connected PC or tablet.

Use your PC's keyboard and mouse to control your phone or tablet, allowing for seamless file dragging and app window manipulation across screens.

Use your phone's front or rear camera as a webcam for your PC, offering flexible angles and clear visuals for video calls or live streams.

Share your phone's mobile data or Wi-Fi connection with other devices (tablets, PCs) that lack network access, without needing to enable a hotspot or enter passwords.

Mirror your phone's screen to a connected PC or tablet, allowing you to operate your phone from the larger display and drag files between devices.

Seamlessly switch audio output to different connected headphones or speakers within the Trust Ring.

5.10 Watch Collaboration

Unlock your phone automatically when your paired Honor Watch is unlocked. Receive alerts on your watch for sensitive app access on your phone.

5.11 Phone and Windows PC Collaboration

Connect your phone to a Windows PC to manage notifications, photos, and calls, or access your phone's screen and apps for enhanced productivity.

5.12 Phone Projection

Wirelessly project your phone's screen to a large display (e.g., TV) for a PC-like desktop experience. This mode also supports hidden notifications to protect your privacy.

Quickly share photos, videos, and files between Honor devices or with other brands (OPPO, vivo, Xiaomi) without using mobile data.

6. System Settings

6.1 Display and Brightness

**Dark Mode:** Reduces eye strain in low light. Enable in Settings > Display & Brightness > Dark Mode.
**Screen Refresh Rate:** Adjust for smoother visuals or better battery life. Go to Settings > Display & Brightness > Screen Refresh Rate.
**Eye Comfort:** Reduces blue light to protect your eyes. Enable in Settings > HONOR Oasis Eye Comfort.
**Font Size and Display Size:** Adjust text and icon sizes for better readability.

6.2 Sound and Haptics

**Do Not Disturb:** Silence calls and notifications during specific times. Configure in Settings > Sound & Haptics > Do Not Disturb.
**Ringtones and Vibration:** Customize ringtones for calls and notifications, and set vibration patterns.

6.3 Biometrics and Password

**Fingerprint Unlock:** Register your fingerprints for secure and quick unlocking. Go to Settings > Biometrics & Password > Fingerprint.
**Face Recognition:** Register your face for convenient unlocking. Go to Settings > Biometrics & Password > Face Recognition.
**Screen Lock Password:** Set a PIN, pattern, or complex password.

6.4 Battery Management

**Power Saving Modes:** Enable various power saving modes to extend battery life. Go to Settings > Battery.
**Smart Charging:** Optimizes charging based on your habits to prolong battery health.

6.5 Storage

View storage usage and clean up unnecessary files. Go to Settings > Storage.

System Manager Cleanup

The System Manager can scan for redundant and large files (e.g., app remnants, duplicate files) and suggest cleanup actions to free up space.

Go to System Manager and tap Cleanup.
After scanning, tap 'Clean' or 'Clean Up Now' and follow the prompts to delete files.

6.6 Security and Privacy

**Password Vault:** Securely store app accounts and passwords. Enable in Settings > Security & Privacy > Password & Passkey > Password Vault.
**Parallel Space:** Create a separate, secure space for sensitive apps and data. Access via Settings > Security & Privacy > Device & Data Protection > Parallel Space.
**AI Anti-Fraud Detection:** Real-time detection of AI deepfake during video calls.
**App Lock:** Protect individual apps with a password or biometric authentication.
**Location Services:** Manage which apps can access your location.

6.7 Accessibility Features

Your Honor 600 Pro offers various accessibility features to assist users with different needs.

**Scheduled Power On/Off:** Set specific times for your phone to power on and off automatically. Go to Settings > Accessibility > Scheduled Power On/Off.
**One-Handed Mode:** Shrinks the screen display for easier one-handed operation. Enable in Settings > Accessibility > One-Handed Mode.
**Text-to-Speech (TTS):** Reads out text on the screen.
**Magnification Gestures:** Zoom in on screen content.
**Color Correction/Inversion:** Adjusts screen colors for users with color vision deficiencies.
**Hearing Aid Compatibility:** Connects to Bluetooth hearing aids.
**Captions:** Displays subtitles for spoken content.
**Flash Alerts:** Camera flash or screen flashes for incoming calls/notifications.

6.8 System Updates

Keep your phone's software up to date to ensure optimal performance and access to the latest features.

Go to Settings > System & Updates > Software Update.
Tap 'Check for updates'. If an update is available, follow the on-screen instructions to download and install it.

Note: It is recommended to back up your data before performing a system update.

7. Troubleshooting

7.1 Common Issues and Solutions

**Phone is unresponsive:** Perform a force restart by pressing and holding the Power button for about 10 seconds.
**Battery drains quickly:** Check for background apps consuming power. Adjust power saving settings in Settings > Battery.
**Cannot connect to Wi-Fi:** Ensure Wi-Fi is enabled and the password is correct. Restart your router and phone.
**Poor camera performance (autofocus, blurry images):** Ensure good lighting. Check for software updates as camera performance can improve with firmware.
**eSIM not working:** Verify with your carrier that the eSIM plan is active and correctly provisioned. Check eSIM settings in Settings > Mobile Network > SIM Card Management.
**Phone not working in USA:** The Hong Kong version may have limited band support for certain US carriers. Check network compatibility with your specific carrier.
**No Spanish language option:** Go to Settings > System & Updates > Language & Input > Language to add or change languages.

8. User Tips

Camera Improvement: Some users have noted that camera performance, especially autofocus, can be inconsistent. Keep your phone's software updated, as firmware updates often include camera optimizations.
Battery Life: The 7000mAh battery generally offers good endurance, lasting 1.5 to 2 days for many users. Utilize power-saving modes for even longer usage.
Network Compatibility: If you are in the USA, verify that the Hong Kong version supports the specific network bands of your chosen carrier to ensure full functionality.
Language Settings: The phone supports multiple languages. If you need Spanish or another language, check the language settings under System & Updates.

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF or contact Honor customer service.

A comprehensive user manual is available in PDF format for more in-depth information:

View User Manual (PDF)

HONOR Honor 600 Pro