1. Introduction
This manual provides detailed instructions for setting up, operating, and troubleshooting your TV98 ATV-ST Android 14 TV Box. Please read this manual carefully before using the device to ensure optimal performance and safety.
Product Information
- Product Name: Android TV BOX
- Model: TV98 ATV-ST
Manufacturer & EU Representative Information
- Manufacturer: Suichuan Zhien Technology Co.Ltd., Room 302, Unit 2, Building 14, Jinyu Capital Community, North of Ji 'an Avenue, Suichuan County, Ji 'an City, Jiangxi Province.
- EU Authorized Representative: HUMISS TRADING S.L, Calle Luis Buñuel 12-3A, Madrid, 28018, Spain.
Image: TV98 ATV-ST TV Box and included remote control.
2. Warning & Safety Information
Important Safety Information
- DO NOT open the device casing. To reduce the risk of electric shock, do not open the device casing. There are no user-serviceable parts inside; all repairs must be performed by qualified personnel. Unauthorized opening may void the warranty and cause safety hazards.
- Avoid extreme conditions. Do not expose the set-top box (STB) or power adapter to rain, moisture, humidity, or extreme temperatures. The recommended operating temperature range is 0°C-40°C; storage temperature range is -20°C-60°C.
- Use only the provided power adapter. Use only the provided power adapter with the following specifications: [Input: 100-240V~50/60Hz; Output: DC 12V/2A]. Using unapproved, damaged, or mismatched power adapters may cause fire, electric shock, or permanent damage to the device.
- Keep away from heat sources. Keep the device away from heat sources (e.g., radiators, stoves, candles) and ensure adequate ventilation (maintain a 10cm gap around the device) to prevent overheating.
- Cleaning instructions. Disconnect the power supply from the wall outlet before cleaning the device. Wipe the surface with a dry, soft, lint-free cloth; do not use liquid cleaners, aerosol cleaners, or abrasive materials, as they may damage the device.
- Child safety. Adult supervision is required during setup and use if children are present. Small parts (e.g., remote control batteries) pose a choking hazard—keep them out of reach of children under 36 months old. If a battery is swallowed, seek medical attention immediately.
- Discontinue use if abnormal. Stop using the device immediately if you notice smoke, strange odors, abnormal noises, or overheating. Disconnect the power adapter and contact the EU Authorized Representative or customer support for assistance.
- Handle cables with care. Do not place heavy objects on the device or its cables, and avoid pulling, bending, or damaging the power cable and HDMI cable to prevent short circuits.
- Indoor use only. This product is intended for indoor use only; do not use it outdoors or in damp environments (e.g., bathrooms, kitchens).
3. Package Contents
Please check the box for the following items:
- TV stick (TV98 ATV-ST) x 1
- Voice remote control x 1
- USB harness x 1
- HDMI cable x 1
- User Manual x 1
- Packaging box x 1
Image: Contents of the TV98 ATV-ST TV Box package.
4. Product Overview
4.1 Front Panel
- Power Indicator (LED): Lights up blue when the device is powered on; blinks blue during boot-up; turns red in standby mode.
- IR Sensor: Receives signal from the remote control; ensure there are no obstacles between the remote and the sensor for normal operation.
4.2 Rear Panel
Image: Labeled ports on the TV98 ATV-ST TV Box.
- HDMI OUT: Connect to the HDMI input port of your TV or monitor to transmit video and audio signals.
- LAN (RJ45): Connect to a router using an Ethernet cable for a stable wired internet connection (supports 10/100/1000Mbps).
- USB 2.0/3.0 Port: Connect USB flash drives, external hard drives, or other USB devices to play local media (videos, music, photos).
- DC IN: Connect the provided power adapter to supply power to the device (input voltage: DC 12V).
- AV OUT (Optional): For analog TV connections (connect to TV's AV input port using an AV cable, not included).
5. Quick Setup Guide
Follow these steps to set up your set-top box quickly. Ensure all connections are secure before powering on the device.
5.1 Hardware Connection
- Open the battery compartment of the remote control, insert 2 AAA batteries, and ensure the positive (+) and negative (-) polarities match the markings inside the compartment. Close the battery compartment securely.
- Connect one end of the HDMI cable to the HDMI OUT port on the STB and the other end to the HDMI IN port on your TV/monitor.
- (Optional) Connect one end of an Ethernet cable to the LAN port on the STB and the other end to your router for a wired internet connection. If using Wi-Fi, skip this step and configure it later in the setup wizard.
- Connect the power adapter to the DC IN port on the STB, then plug the other end of the adapter into a grounded wall outlet.
- Power on the STB by pressing the Power button on the device or the remote control. Power on your TV and switch its input source to the HDMI port connected to the STB (e.g., HDMI 1, HDMI 2) using the TV's remote control.
Image: TV Box Connection Settings diagram.
5.2 Initial Configuration (Setup Wizard)
- The STB will boot up automatically and display the setup wizard on your TV screen. Follow the on-screen prompts to complete the initial configuration.
- Language Selection: Choose your preferred language (English, German, French, Spanish, Italian, etc.—EU languages are supported) from the dropdown menu.
- Internet Connection:
- If using wired internet: The device will connect automatically (DHCP enabled by default).
- If using Wi-Fi: Select your Wi-Fi network from the list of available networks, enter the Wi-Fi password (case-sensitive), and tap "Connect" to establish the connection.
- System Update: If a firmware update is available, the device will prompt you to download and install it. Click "Update Now" and do not power off the device during the update (this may take 2-5 minutes).
- Remote Control Pairing (If Applicable): If your remote control supports Bluetooth pairing, follow the on-screen instructions to pair it with the STB (for IR remotes, no pairing is required).
- Complete Setup: After configuring all settings, the STB will redirect you to the main menu. You can now start using the device.
6. Basic Operation
6.1 Remote Control Buttons & Functions
| Button | Function |
|---|---|
| Power | Turn the STB on or off (enters standby mode when turned off). |
| Home | Return to the main menu from any screen. |
| Back | Go back to the previous screen or exit the current menu. |
| Navigation (↑↓←→) + OK | Use the navigation buttons to select options; press OK to confirm your selection. |
| Volume +/- / Mute | Adjust the TV volume; press Mute to turn off audio temporarily. |
| Number Keys (0-9) | Directly input channel numbers (for live TV apps that support channel number input). |
| Menu | Access the device's settings menu and advanced options. |
| Play/Pause / Stop | Control media playback (for local media or VOD content). |
Image: Remote control infrared learning instructions.
6.2 Main Functions
- Live TV: Open the pre-installed live TV app to stream live channels (internet connection required).
- Video-on-Demand (VOD): Watch movies, TV shows, and other on-demand content through VOD apps.
- Media Player: Open the Media Player app to play local media files (MP4, MKV, MP3, JPG, etc.) from USB devices connected to the USB port.
- Settings: Adjust network, display, audio, and system preferences (see Section 7 for details).
7. Advanced Settings
Access the advanced settings by pressing the "Menu" button on the remote control and selecting "Settings" from the main menu.
7.1 Network Settings
- Wi-Fi: View available Wi-Fi networks, connect to a new network, forget a saved network, or adjust Wi-Fi signal strength.
- Wired (LAN): Configure IP settings (DHCP by default; static IP can be set manually if needed).
- Network Status: Check internet connection status, IP address, subnet mask, gateway, and DNS server.
7.2 Display Settings
- Resolution: Select the appropriate resolution (1080p@60fps, 4K@60fps, etc.) based on your TV's capabilities. We recommend selecting "Auto" for automatic resolution matching.
- Screen Size: Adjust the screen size to fix overscan or underscan issues (if the image is cut off on the edges of the TV).
- HDR Mode: Enable or disable HDR (High Dynamic Range) for better image quality (supported TVs only).
7.3 Audio Settings
- Audio Output: Select the audio output mode (HDMI, AV, or Optical, if applicable).
- Audio Language: Select the default audio track language for supported content (if multiple languages are available).
- Volume Control: Adjust the device's volume level (independent of TV volume).
7.4 System Settings
- System Update: Check for and install the latest firmware updates manually (automatic updates are enabled by default).
- Factory Reset: Erase all user data (apps, settings, passwords) and restore the device to its factory defaults. Note: Back up important data before performing a factory reset.
- About Device: View device model, serial number, firmware version, MAC address, and other device information.
- Sleep Mode: Set the device to enter standby mode automatically after a period of inactivity (5 minutes, 10 minutes, 30 minutes, or never).
8. Troubleshooting Common Issues
If you encounter problems while using the set-top box, refer to the following troubleshooting guide before contacting customer support. Most issues can be resolved quickly with simple steps.
| Issue | Troubleshooting Steps |
|---|---|
| No power, LED indicator not lit |
|
| No picture on TV |
|
| No sound |
|
| Remote control not working |
|
| Wi-Fi connection issues (slow/unstable) |
|
| Slow device performance, apps crashing |
|
| USB device not recognized |
|
9. Technical Specifications
| Feature | Specification |
|---|---|
| CPU | Allwinner H313 Quad Core ARM Cortex A53 |
| GPU | Mali-G31 OpenGL3.2 |
| Memory | 1GB DDR3 (Option: 2GB) |
| Internal Storage | 8GB eMMC (Option: 16GB) |
| WiFi | 802.11 b/g/n 2.4G+5G WiFi |
| Bluetooth | BT5.0 |
| Ethernet | 1000M |
| OS | Android 14.0 (Android TV) |
| Video Output | HDMI-Compatible 2.1 (4K*2K UHD Output, HDMI 2.0A) |
| Video Decoding | 8K Video Decoding, HDR 10+, Amlogic Video Engine (AVE) with dedicated hardware decoders and encoders, supports multi-video decoder up to 4K@60fps, supports multiple "secured" video decoding sessions and simultaneous decoding and encoding, Video/Picture Decoding |
| I/O Ports | 1*HDMI, 1*USB Host Port, 1*IR Receiver, 1*TF CARD |
| Power Source | DC 5V/2A |
| LED Indicator | Working: Blue; Standby: Red |
| Remote Control | Included |
| Supported Internet Services | YouTube |
| IPTV | Yes |
Image: Detailed technical specifications.
10. User Tips
While no specific user reviews or Q&A were provided for this product, here are some general tips for optimizing your TV Box experience:
- Keep Firmware Updated: Regularly check for and install system updates to ensure you have the latest features, security patches, and performance improvements.
- Optimize Wi-Fi: If experiencing slow Wi-Fi, try moving the TV Box closer to your router or consider a wired Ethernet connection for more stable performance, especially for 8K streaming.
- Clear Cache: If apps are running slowly or crashing, try clearing the app cache in the device settings. This can free up memory and improve responsiveness.
- Use a Quality HDMI Cable: For optimal 8K video output, ensure you are using a high-quality HDMI 2.1 compatible cable.
- External Storage: For playing local media, ensure your USB drives are formatted to FAT32 or NTFS for best compatibility.
11. Warranty and Support
For warranty information and customer support, please contact the manufacturer or their authorized representative:
- Manufacturer: Suichuan Zhien Technology Co.Ltd. (zhien8899@163.com)
- EU Authorized Representative: HUMISS TRADING S.L. (eugpsres@outlook.com)
Please retain your proof of purchase for any warranty claims.
12. Frequently Asked Questions (FAQ)
No specific Q&A content was provided for this product. However, here are some general FAQs related to TV Boxes:
- Q: Can I install additional apps on this TV Box?
- A: Yes, as it runs on Android 14, you can typically download and install apps from the Google Play Store or other trusted sources.
- Q: Does this TV Box support external hard drives?
- A: Yes, it supports connecting USB flash drives and external hard drives via its USB 2.0/3.0 ports for playing local media.
- Q: How do I update the system firmware?
- A: You can check for and install updates manually through the 'System Update' option in the Advanced Settings menu. Ensure you do not power off the device during an update.
- Q: What should I do if the remote control is not responding?
- A: First, replace the batteries. Ensure there are no obstructions between the remote and the TV Box's IR sensor. If it's a Bluetooth remote, try re-pairing it through the setup wizard.
13. Manufacturing Process
Watch a brief video showcasing the manufacturing and quality control process of the TV Box.