1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your MAGIC COLORM LED Fog Lamps for Mitsubishi Lancer (2008-2013 models). Please read this manual thoroughly before installation and retain it for future reference.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
- 2 x Fog Lamp Assemblies
Please inspect the package contents upon receipt to ensure all items are present and undamaged.
4. Specifications
| Item Type | Fog Lamp Assembly |
| Voltage | 12 V |
| Wattage | 55W (per light), 110W/Set |
| Lumens | 3400LM |
| Light Color | White (DRL), Amber (Turn Signal) |
| Headlight Bulb Type | H11 |
| Material | ABS + PC Lens |
| Special Features | Long Lifespan, Super Bright, IP67 Waterproof, Shockproof |
| Item Weight | 1kg (approx.) |
| Certification | CCC |
Compatibility: Designed for Mitsubishi Lancer 2008-2013 models. Not compatible with Evolution and Ralliart Models.
5. Setup & Installation
These fog lamps are designed for quick and easy, non-destructive installation, directly replacing your stock fog lights. Professional installation is recommended if you are unfamiliar with automotive electrical systems.
Installation Steps:
Step 1: Preparation Work (Safety First)
- Power Off When Parking: Park the car steadily and engage the handbrake.
- Disconnect Battery: Be sure to disconnect the negative cable of the battery to prevent electrical shorts.
Step 2: Remove the Old Light
- Open the tailgate (if applicable for rear lights, but for front fog lights, access is usually from the front bumper/wheel well).
- Locate and remove the tail light repair cover from the inside (or access panel for front fog lights).
- Disconnect the electrical plug from the old fog lamp.
- Unscrew any fixing nuts or bolts holding the old fog lamp in place.
- Carefully pull out the old lamp assembly.
Step 3: Install the New Light (Test First, Then Fix)
- Pre-testing:
- First, connect the new fog light plug to the original car harness.
- Reconnect the battery.
- Turn on the power (e.g., turn on headlights/fog lights, turn signals, etc.).
- Test whether the brake lights, turn signals, reverse lights, and driving lights (DRL) are all lit up normally.
- Formal Installation:
- After confirming that the function is normal, disconnect the battery again.
- Align the new fog light with its position in the bumper.
- Install it and tighten all the fixing nuts from the inside.
- Finally, securely connect the electrical plug and replace any removed maintenance covers or access panels.

Figure 1: Easy installation with standard plug for non-destructive setup.

Figure 2: Wiring diagram for connection. Black wire connects to Negative (-), Red wire connects to ACC (Accessory power, typically switched with ignition).
- Pre-testing:
Step 4: Final Inspection
- Function Review: Reconnect the battery and finally check all lighting functions once more (fog lights, DRL, turn signals).
- Sealing Inspection: After washing the car or pouring water over the fog light area, check whether there is severe water ingress and fogging inside the lamp. Slight fogging can light up and dry normally; persistent or severe water ingress indicates a sealing issue that needs to be addressed.

Figure 3: Visual comparison of the fog lamp installation effect on a red Mitsubishi Lancer.

Figure 4: Visual comparison of the fog lamp installation effect on a grey Mitsubishi Lancer.
6. Operating Instructions
Once properly installed, your MAGIC COLORM LED Fog Lamps will operate in conjunction with your vehicle's existing lighting controls.
- Fog Light Function: The main fog light function will activate when you turn on your vehicle's fog lights using the standard control switch (usually on the dashboard or steering column stalk).
- Daytime Running Lights (DRL): The white DRL function will typically activate automatically when the vehicle is running, depending on how the ACC wire is connected and your vehicle's electrical system.
- Turn Signal Function: The amber turn signal function will activate when you engage your vehicle's turn signals, providing enhanced visibility.

Figure 5: Illustration of the clear and wide beam pattern provided by the fog lamps.

Figure 6: The fog lamps illuminated, showcasing their bright white light output.

Figure 7: The fog lamps displaying both the white DRL/driving light and the amber turn signal functionality.
Video 1: Product showcase demonstrating the fog lamps' features and lighting effects.
7. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your LED fog lamps.
- Cleaning: Regularly clean the lens of the fog lamps with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
- Inspection: Periodically check the lamps for any signs of damage, cracks, or loose connections. Ensure the mounting hardware remains secure.
- Water Ingress: After heavy rain or car washes, briefly inspect the lamps for any signs of persistent moisture inside. While slight condensation may clear, significant water ingress should be addressed.
- Electrical Connections: Ensure all electrical connections remain tight and free from corrosion.

Figure 8: The fog lamps are designed to withstand various weather conditions including water, fog, dust, and snow.

Figure 9: The fog lamps feature an IP67 waterproof rating, ensuring durability in adverse weather.
8. Troubleshooting
If you encounter issues with your fog lamps, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fog lamps do not light up. |
|
|
| One fog lamp is not working. |
|
|
| Condensation or fogging inside the lamp. |
|
|
If problems persist after attempting these solutions, please consult a qualified automotive technician.
9. User Tips
- Pre-Test Thoroughly: Always perform the pre-installation test as described in the manual to ensure all functions (fog, DRL, turn signal) work correctly before fully securing the lamps. This saves time and effort.
- Secure Wiring: After connecting the wires, use zip ties or electrical tape to secure them away from moving parts or hot engine components to prevent damage.
- Align Carefully: When installing, ensure the lamps are properly aligned in their housing for optimal light projection and aesthetic appeal.
- Check Vehicle Manual: Refer to your Mitsubishi Lancer's owner's manual for specific instructions on accessing and replacing fog light assemblies, as procedures may vary slightly by trim level.
10. Warranty & Support
For warranty information or technical support, please refer to the seller's terms and conditions or contact the point of purchase. Keep your proof of purchase for any warranty claims.
Manufacturer: Guangzhou Camel Technology Co., Ltd.