KAVERY Universal Shark Fin Antenna

Contents

KAVERY Universal Car Shark Fin Antenna User Manual

Model: Universal Shark Fin Antenna

1. Product Overview

The KAVERY Universal Car Shark Fin Antenna is designed to replace traditional rod antennas, offering improved aesthetics, enhanced AM/FM radio signal reception, and reduced wind resistance. Made from durable ABS material with a fashionable piano paint finish, it is waterproof and features a dedicated adhesive backing for easy, non-damaging installation.

KAVERY Shark Fin Antenna in Pearl White
KAVERY Shark Fin Antenna in Pearl White.

Key Features:

  • Enhanced Signal Reception: Equipped with imported enhanced signal receivers for strong and stable AM/FM signal transmission.
  • Sleek Design: Shark fin shape with a baking paint process for a beautiful and fashionable appearance, reducing wind resistance.
  • Durable Material: Environmentally friendly ABS construction, durable and resistant to peeling.
  • Waterproof: Features a waterproof rubber ring at the base for a tight fit, protecting against rain and car washes.
  • Easy Installation: Dedicated adhesive backing ensures secure installation without damaging the vehicle body.
  • Multiple Colors: Available in various colors to match your car's original paint system.
Shark fin antenna on a car roof, showing signal waves, and a selection of available colors.
The shark fin antenna enhances signal reception and is available in multiple colors.

2. Installation Guide

Follow these steps to install your KAVERY Shark Fin Antenna:

  1. Remove the Original Antenna: Carefully unscrew and remove your car's existing rod antenna.
  2. Connect the Signal Wire: Take the shark fin antenna and connect its internal copper wire to the original car antenna's screw hole. Ensure it is tightly fastened.
  3. Prepare for Adhesion: Remove the protective paper from the adhesive backing on the bottom of the shark fin antenna.
  4. Position and Secure: Align the shark fin antenna to the desired position on your car's roof, ensuring the signal wire is tucked neatly inside the antenna housing. Press firmly for a few seconds to secure it in place.
Installation steps diagram showing removal of old antenna, connecting copper wire, removing adhesive, and pressing to fix.
Visual guide for the installation process.

Installation Video:

Watch this video for a detailed demonstration of the shark fin antenna installation.

3. Operating Instructions

The KAVERY Shark Fin Antenna operates passively, receiving AM/FM radio signals. Once correctly installed, it functions automatically with your car's radio system. No additional power source or configuration is required.

  • Turn on your car's radio to access AM/FM stations.
  • The antenna will automatically pick up available signals.
  • For best reception, ensure the antenna is securely attached and free from obstructions.

4. Maintenance and Care

  • Cleaning: Clean the antenna regularly with a soft cloth and mild car soap. Avoid abrasive cleaners that could damage the paint finish.
  • Inspection: Periodically check the adhesive seal around the base of the antenna to ensure it remains watertight and securely attached.
  • Avoid Harsh Chemicals: Do not use strong solvents or chemicals near the antenna, as they may degrade the material or finish.

5. Troubleshooting

Poor or Intermittent Signal:

  • Check Connection: Ensure the copper signal wire is securely screwed into the car's original antenna base. A loose connection can significantly impact signal quality.
  • Antenna Placement: Verify the antenna is correctly positioned on a flat, clean surface of the car roof.
  • Environmental Factors: Signal reception can be affected by geographical location, tall buildings, or remote areas. Try moving the vehicle to a different location.
  • Internal Damage: If the issue persists, inspect the internal components of the shark fin antenna for any visible damage or loose wiring.
Image showing common problems with original antennas (too long, bad signal) and the solution (install shark fin antenna to improve grade).
Addressing common signal issues with the shark fin antenna.

6. Specifications

Attribute Detail
Product Name Shark Fin Antenna
Item Type Aerials
Material Attributes Piano Paint (ABS)
Wireless Function Yes
Receiving Method Module Yes
Applicable Model Applicable to multiple models
Installation Position Roof
Product Features Strengthen signal effect, dynamic lines, reduce wind resistance, aesthetic enhancement
Dimensions (L x W x H) Approx. 17 cm x 8 cm x 7 cm
Weight Approx. 0.115 kg
Origin Mainland China
Product specifications table and visual representation of the antenna.
Detailed product specifications.

7. User Tips

  • For optimal adhesion, ensure the car roof surface is thoroughly cleaned and dry before applying the antenna.
  • Apply firm, even pressure for several seconds during installation to ensure a strong bond with the adhesive.
  • Consider the aesthetic match: choose a color that complements your car's paint for a seamless look.
  • While waterproof, it's advisable to allow the adhesive to cure for at least 24 hours before exposing the antenna to heavy rain or car washes.

8. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made. Ensure you retain your proof of purchase for any claims.

This product is designed for general use and is not intended for specialized or critical applications where signal loss could result in significant harm or damage.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.