1. Introduction
Thank you for choosing the MAIWO SAS/SATA External Hard Drive Enclosure. This device provides a convenient and efficient way to connect 2.5-inch and 3.5-inch SAS or SATA hard drives and solid-state drives (SSDs) to your computer via a high-speed Type-C (USB 3.0) interface. It supports large capacities up to 30TB, making it ideal for data backup, storage expansion, and accessing enterprise-grade SAS drives directly.

2. Safety Precautions
- Do not expose the device to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Use only the provided power adapter to prevent damage to the enclosure and connected drives.
- Do not attempt to open or modify the enclosure, as this will void the warranty and may cause damage.
- Ensure proper ventilation around the enclosure during operation.
3. Package Contents
Please check the package contents upon unboxing:
- MAIWO SAS/SATA External Hard Drive Enclosure
- USB-C to USB-A Data Cable
- 12V 2A Power Adapter (Plug type may vary based on region: EU, US, AU, UK)
- Screwdriver (for securing drives, if applicable)
- User Manual (this document)

4. Setup Guide
4.1. Installing a Hard Drive/SSD
- Gently slide open or remove the cover of the enclosure according to its design.
- Carefully insert your 2.5-inch or 3.5-inch SAS or SATA hard drive/SSD into the enclosure's connector bay, ensuring it is firmly seated.
- If screws are provided, secure the drive within the enclosure using the supplied screwdriver.
- Close or slide back the enclosure cover until it is securely fastened.
4.2. Connecting to Your Computer
- Connect the provided 12V 2A power adapter to the DC input port on the enclosure and then plug it into a power outlet.
- Connect one end of the USB-C to USB-A data cable to the Type-C port on the enclosure.
- Connect the other end of the data cable to an available USB port on your computer. For optimal performance, use a USB 3.0 (or higher) port.
4.3. Powering On
Press the power button on the enclosure. The LED indicator should illuminate, signifying that the device is powered on and ready for use.
4.4. Disk Initialization and Formatting (for new drives)
If you are using a brand new hard drive, it will need to be initialized and formatted before it can be used. The process varies slightly depending on your operating system (Windows, macOS, Linux). Below are general steps for Windows:
- Connect the enclosure with the new drive to your computer and power it on.
- Open Disk Management: Right-click on 'This PC' (or 'My Computer'), select 'Manage', then 'Disk Management'. Alternatively, search for 'Disk Management' in the Start menu.
- You should see your new drive listed as 'Unallocated'. Right-click on the disk number (e.g., Disk 1) and select 'Initialize Disk'. Choose MBR (Master Boot Record) or GPT (GUID Partition Table) based on your needs (GPT is recommended for drives larger than 2TB).
- After initialization, right-click on the 'Unallocated' space on the new disk and select 'New Simple Volume'. Follow the wizard to assign a drive letter, choose a file system (NTFS for Windows), and perform a quick format.
This enclosure supports both SAS and SATA protocols, allowing direct access to enterprise-grade SAS hard drives without requiring a separate RAID card.


5. Operating Instructions
5.1. Data Transfer
Once the drive is recognized by your operating system, you can access it like any other external drive. You can drag and drop files, copy/paste, or use backup software to transfer data to and from the drive.
5.2. Safe Removal
To prevent data corruption, always safely eject the drive from your operating system before disconnecting the enclosure or powering it off. For Windows, right-click the drive icon in 'This PC' and select 'Eject', or use the 'Safely Remove Hardware and Eject Media' icon in the system tray.
5.3. RAID Configuration (Advanced Users)
While this enclosure primarily functions as a single-drive direct-attached storage, some operating systems offer software RAID capabilities. If you intend to use multiple drives in a RAID configuration (e.g., RAID 0 for striping, RAID 1 for mirroring, RAID 5 for parity), please consult your operating system's documentation for detailed instructions on setting up software RAID. The provided PDF manual for a similar MAIWO 4-bay enclosure (available at User Manual PDF) can offer conceptual guidance on RAID types, but specific steps may differ for single-drive enclosures or different operating systems.
6. Maintenance
- Keep the enclosure clean by wiping it with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Ensure the ventilation holes (if any) are free from dust and obstructions to maintain optimal heat dissipation.
- Store the device in a cool, dry place when not in use.

7. Troubleshooting
7.1. Drive Not Detected
- Ensure the enclosure is powered on and the LED indicator is lit.
- Check all cable connections (power and USB) are secure.
- Try connecting to a different USB port on your computer.
- Verify the hard drive/SSD is properly seated inside the enclosure.
- For new drives, ensure it has been initialized and formatted via Disk Management (Windows) or Disk Utility (macOS).
- Test with a different hard drive/SSD to rule out drive issues.
7.2. Slow Data Transfer Speed
- Ensure you are connected to a USB 3.0 (or higher) port on your computer. USB 2.0 ports will operate at slower speeds.
- Verify your computer's USB drivers are up to date.
- The actual speed depends on the performance of the installed hard drive/SSD.
- Ensure the UASP (USB Attached SCSI Protocol) is enabled by your operating system for optimal performance.
7.3. Power Issues
- Ensure the power adapter is securely connected to both the enclosure and a working power outlet.
- Use only the original 12V 2A power adapter provided with the enclosure.

8. Specifications
| Feature | Specification |
|---|---|
| Model | MAIWO SAS/SATA External Hard Drive Enclosure |
| Compatible Drive Types | 2.5" and 3.5" SAS HDD/SSD, SATA HDD/SSD |
| Max. Drive Capacity | Up to 30TB |
| External Interface | USB 3.0 Type-C (backward compatible with USB 2.0) |
| Data Transfer Rate | Up to 5Gbps (USB 3.0) |
| Power Supply | External 12V 2A Power Adapter |
| Case Material | Aluminum Alloy + Plastic |
| Features | Tool-Free, Plug & Play, UASP Support, TRIM Support |

9. User Tips
- Cooling Performance: The enclosure features an aluminum alloy body which contributes to efficient heat dissipation, helping to maintain appropriate temperatures even during extensive read/write operations.
- SAS Drive Compatibility: This enclosure is confirmed to work perfectly with SAS hard drives, allowing you to utilize enterprise-grade storage with your standard PC or laptop.
- Speed Clarification: While some descriptions might vary, the actual data transfer rate for this device is up to 5Gbps, consistent with USB 3.0 specifications.
10. Warranty and Support
This MAIWO product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or MAIWO customer service through the platform where you purchased the product.