Aftermarket Dynamic LED Sequential Turn Signal Light

Contents

Dynamic LED Sequential Turn Signal Light User Manual

For Ford Mondeo Mk2, Mk3, and Mk4 Models

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your new Dynamic LED Sequential Turn Signal Lights. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Safety Warnings

  • Keep Away: Maintain a safe distance from the device while it is in operation.
  • No Unauthorized Modification: Disassembling or modifying the circuitry is strictly prohibited. Unauthorized modifications can lead to product damage, malfunction, or safety hazards.
  • Avoid Moisture: Do not operate in rainy conditions or high-humidity environments. This product is designed for automotive exterior use but should not be submerged or exposed to excessive moisture beyond normal driving conditions.
  • Prevent Impact: Avoid severe vibration or physical impact to the device. Handle with care during installation and use.
  • Electrical Safety: Ensure all power connections are made correctly to a 12V DC power supply. Incorrect voltage or polarity can damage the lights and vehicle electrical system. Professional installation is recommended.

Product Overview

The Dynamic LED Sequential Turn Signal Lights are designed to enhance vehicle visibility and aesthetics by providing a modern, sequential amber light pattern for turn indications. Some variants may also offer a dual-color function (e.g., blue for daytime running light and sequential yellow for turn signal).

Product Features:

  • Dynamic sequential amber turn signal.
  • LED technology for bright and efficient illumination.
  • Designed for side rearview mirror integration.
  • Available in clear or smoked lens options.
  • Some models feature dual-color functionality (e.g., blue DRL + sequential yellow turn).

Visual Demonstration:

Video: Demonstration of the dynamic sequential turn signal light in operation, showing the blue and yellow light sequence.

Product Images:

Pair of clear lens sequential turn signals with connectors, showing amber light in operation and installed on a car mirror.
Clear lens sequential turn signals, installed and active.
Pair of clear lens sequential turn signals with connectors, showing amber light in operation.
Clear lens sequential turn signals, active amber light.
Pair of smoked lens sequential turn signals with wiring, showing blue and amber light options.
Smoked lens sequential turn signals, showing blue and amber options.
Pair of clear lens sequential turn signals, top view.
Top view of clear lens sequential turn signals.
Close-up of a single clear lens sequential turn signal held in hand, showing the connector.
Close-up of a single turn signal with connector.
Clear lens sequential turn signal with 'Yellow Crystal Style' text overlay.
Yellow Crystal Style turn signal.

Specifications

Attribute Value
Product Type Dynamic LED Sequential Turn Signal Light
Voltage 12 V DC
Item Type Turn Signal
Compatibility Ford Mondeo Mk2, Mk3, Mk4 (EU models)
Origin Mainland China
High-concerned chemical None
Package Dimensions (L x W x H) 19 cm x 11 cm x 7 cm
Package Weight 0.159 kg

Installation Instructions

Professional installation is highly recommended for this product. Incorrect installation can lead to damage to the product or your vehicle's electrical system. Ensure the vehicle's power is off before beginning installation.

  1. Preparation: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the car battery to prevent electrical shorts.
  2. Access Mirror Assembly: Carefully remove the side rearview mirror cap or housing to gain access to the existing turn signal light. Consult your vehicle's service manual for specific instructions on mirror disassembly.
  3. Remove Old Light: Disconnect the wiring from the existing turn signal light and remove it from the mirror assembly.
  4. Install New Light: Connect the wiring of the new Dynamic LED Sequential Turn Signal Light to the vehicle's turn signal wiring harness. Ensure proper polarity (positive to positive, negative to negative). If your model has a dual-color function, connect the additional wire (e.g., blue light wire) to a suitable 12V ignition-switched power source for the DRL function.
  5. Secure Light: Mount the new LED turn signal light securely into the mirror assembly.
  6. Test Functionality: Before reassembling the mirror, reconnect the car battery. Test the turn signals (and DRL if applicable) to ensure they function correctly and sequentially.
  7. Reassemble: Once functionality is confirmed, carefully reassemble the mirror cap and housing.

Installation Location: Install in an open, unobstructed area within the side rearview mirror housing to ensure maximum visibility.

Operation

The Dynamic LED Sequential Turn Signal Lights operate in conjunction with your vehicle's existing turn signal system.

  • Turn Signal Activation: When the vehicle's turn signal stalk is activated (left or right), the corresponding LED turn signal light in the side mirror will illuminate with a dynamic, sequential amber pattern, indicating the direction of the turn.
  • Dual-Color Function (if applicable): For models with dual-color functionality, the blue light (or other secondary color) will activate when the vehicle's ignition is on, serving as a Daytime Running Light (DRL). When the turn signal is activated, the blue light will temporarily switch off, and the sequential amber turn signal will take over.

Maintenance

These LED turn signal lights are designed for long-lasting performance with minimal maintenance.

  • Cleaning: Clean the lens with a soft, damp cloth and mild soap if necessary. Avoid abrasive cleaners or harsh chemicals that could damage the plastic.
  • Inspection: Periodically check the lights for any signs of damage, loose connections, or moisture ingress.
  • Environmental Protection: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., intense UV, heavy rain, extreme temperatures) can affect lifespan.

Troubleshooting

Problem Possible Cause Solution
Light Not Illuminating
  • No power supply connection.
  • Blown fuse in vehicle's electrical system.
  • Incorrect wiring.
  • Faulty LED unit.
  • Check if the power supply is connected securely.
  • Inspect and replace any blown fuses in the vehicle's fuse box.
  • Verify wiring connections for correct polarity and secure contact.
  • If all else fails, the LED unit may be faulty and require replacement.
Abnormal Color Display or Non-Sequential Flash
  • Poor wiring contact.
  • Controller failure (if applicable).
  • Incorrect wiring for dual-color function.
  • Check all wiring connections for secure and clean contact.
  • Ensure the correct variant of the light is installed for your vehicle's wiring.
  • If the issue persists, consult a professional auto electrician.

User Tips

No specific user tips were available from reviews or Q&A for this product.

Warranty and Support

This product is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support or warranty claims, please contact the seller or manufacturer directly.

An additional user manual (PDF) may be available for more detailed instructions: View User Manual (PDF)

© 2023 Aftermarket Automotive Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.