RONGYIN BT8000

Contents

BT8000 Full Band Bluetooth APP Program Ham Radio User Manual

Model: BT8000 | Brand: RONGYIN

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your BT8000 Full Band Bluetooth APP Program Ham Radio. Please read this manual thoroughly before using the device and retain it for future reference. The BT8000 is a versatile two-way radio featuring full band reception, Bluetooth APP programming, 256 channels, USB-C charging, and support for aviation, NOAA weather alerts, SOS functions, and various amateur radio bands.

2. Safety Information

2.1 Disclaimer

This manual has been compiled with the aim of ensuring the accuracy and completeness of its contents. However, our company assumes no responsibility for any errors or omissions that may occur. Due to continuous technological development, our company reserves the right to change product design and specifications without prior notice. This manual may not be reproduced, modified, translated, or distributed in any form without prior written authorization from our company. Third-party products and content mentioned in this manual are the property of their respective owners, and our company makes no guarantee as to their accuracy, validity, timeliness, legality, or completeness.

2.2 RF Radiation Information

This product is intended solely for professional use where RF energy radiation requirements can be met. Users must be fully aware of RF radiation hazards and take appropriate measures to comply with RF radiation limits.

2.3 RF Radiation Basics

RF (Radio Frequency) refers to electromagnetic frequencies that can radiate into space. It is a technology widely used in fields such as communications, medical, and food processing, and it generates a certain amount of RF radiation during use.

2.4 FCC Regulatory Requirements

In accordance with the regulations of the Federal Communications Commission (FCC) of the United States, this product must comply with FCC RF radiation limits to be sold in the U.S. market. Manufacturers are required to inform users of important safety precautions by labeling the product, thus enhancing user awareness of radiation protection.

2.5 RF Radiation Safety

To ensure the health and well-being of users, experts from the fields of science, engineering, medicine, health, and industry, along with relevant organizations, have jointly developed RF radiation standards and guidelines, as follows:

  • Title 47, Part 2, Subpart J of the Code of Federal Regulations (CFR) by the Federal Communications Commission (FCC) of the United States.
  • ANSI (American National Standards Institute) / IEEE (Institute of Electrical and Electronics Engineers) Standard C95.1-1992.
  • IEEE Standard C95.1-1999.
  • Standards issued in 1998 by the International Commission on Non-Ionizing Radiation Protection (ICNIRP).

2.6 RF Radiation Control and Operating Instructions

To ensure optimal performance and compliance with the radiation limits for occupational or controlled environments as specified in the standards, the transmission time should not exceed a duty cycle of 50% (i.e., a maximum of 50% transmission time). Adhere to the following instructions: RF energy radiation is only generated during transmission (talking), not during receiving (listening) or standby mode. Maintain a minimum distance of 2.5 centimeters between the device and the body during transmission.

3. Package Contents

The standard package for your BT8000 radio includes the following items:

  • 1 × Radio Body
  • 1 × Battery
  • 1 × Antenna
  • 1 × Belt Clip
  • 1 × Sling
  • 1 × English Manual
  • 1 × Type-C Cable + Plug

(Additional accessories may be included depending on your specific purchase option.)

Diagram showing the standard package contents of the BT8000 radio: radio, antenna, battery, belt clip, sling, charger, manual, and box.
Figure 3.1: Standard Package Contents

4. Product Overview

The BT8000 is a high-performance multi-band handheld radio designed for a wide range of communication needs. It features a robust design and advanced functionalities.

4.1 Key Features

  • Full Band Coverage: Supports a wide range of frequencies including 18-108 MHz (TX/RX), 108-136 MHz (RX), 136-580 MHz (TX/RX), and 760-999 MHz (TX/RX).
  • Bluetooth APP Programming: Conveniently program channels and settings via a smartphone app (iOS/Android).
  • 256 Memory Channels: Ample storage for your preferred frequencies.
  • 10W High Power: Stronger signal and longer range, with adjustable power levels (H/M/L).
  • 5600mAh Large Capacity Battery: Ensures long standby and extended use.
  • Type-C Charging: Modern and versatile charging via USB-C port.
  • Dual Display: Large color screen with dual-frequency display and two independent operating systems.
  • One-Click Wireless Frequency Copy: Simplifies frequency alignment.
  • NOAA Weather Forecast Function: Stay informed about weather conditions.
  • SOS Function: Emergency alert capability.
  • AM/FM Radio: Includes both AM and FM reception.
  • Scrambling Function: Enhances communication privacy.
  • Dual Standby: Monitor two frequencies simultaneously.
  • VOX (Voice-Operated Transmission): Hands-free transmission.
  • Keypad Lock: Prevents accidental key presses.
  • Noise Reduction: Improves audio clarity.
  • Multi-language Support: Fast switch between English and Russian menus.
  • Multiple Side Buttons: Customizable functions for quick access.
  • Fast Frequency Scan: Efficiently find active frequencies.

4.2 Interface Icon Descriptions

The radio's display uses various icons to indicate its current status and active functions. Refer to the table below for a description of each icon:

Icon Description
CTAnalog Sub-audio Tone Indicator. Indicates current sub-audio tone is analog. Appears during transmission.
DCSDigital Sub-audio Tone Indicator. Indicates current sub-audio tone is digital. Appears during transmission.
HHigh Power Indicator. Current transmission power is set to high.
MMedium Power Indicator. Current transmission power is set to medium.
LLow Power Indicator. Current transmission power is set to low.
NNarrowband Mode Indicator. Channel is operating in narrowband mode.
WWideband Mode Indicator. Channel is operating in wideband mode.
+Frequency Mode (+ Frequency Offset). Transmission frequency = reception frequency + offset.
-Frequency Mode (- Frequency Offset). Transmission frequency = reception frequency - offset.
RFrequency/Channel Mode Inverted Frequency. Reception and transmission frequencies are inverted.
TSimplex Mode. Reception and transmission frequencies are the same.
SCSC (Encryption) Indicator. Encryption function is enabled.
AMAM Modulation Indicator. Current frequency is in AM modulation mode.
SCRScrambler Function. Scrambler function is active.
VOXVOX (Voice-Operated Transmission). VOX function is enabled. Transmission starts when microphone sound pressure reaches threshold.
DWDual Standby. Dual-band standby function is set and active, allowing simultaneous monitoring of two frequency points.
MOMonitor Function Enabled. Monitor function is enabled.
♪Side Tone Enabled. Side tone function is active, producing a tone sound when transmitting DTMF.
🔒Keypad Lock. Keypad is locked. Long press # key to unlock.
RSSISignal Strength. Indicates the strength of the received signal.
ABA/B Band. Indicates whether the A band or B band is active.
VOLTransmit Audio Volume. Indicates the volume level of the transmitted audio.
🔋Battery Status. Displays remaining battery power. Outer frame flashes when battery is nearly depleted (transmission prohibited). Outer frame green indicates super power-saving mode.
ⒷEnable the Bluetooth connection function.

5. Setup and Getting Started

5.1 Charging Instructions

The BT8000 radio supports both dock charging and direct Type-C charging.

  1. Dock Charging (Optional): Insert the battery pack or the radio with the battery pack into the charging dock. Ensure proper contact with the charging terminals of the dock.
  2. Type-C Charging: Connect the provided charging cable to the power adapter and plug the power adapter into an AC power outlet. Insert the charging cable into the Type-C interface of the main unit's battery.
  3. Charging Indicator: When the device is charging, the red indicator light indicates charging in progress. The green indicator light indicates charging is complete.
Diagram showing various Type-C charging methods for the BT8000 radio, including USB, computer, power bank, and car charger.
Figure 5.1: Type-C Port Charging Methods

5.2 Bluetooth APP Programming

The BT8000 can be programmed wirelessly using a dedicated smartphone application. This allows for convenient and fast configuration of channels and settings.

  1. Download the APP: Scan the QR codes below with your smartphone to download the programming software for iOS or Android.
  2. Connect via Bluetooth: Enable Bluetooth on your radio and smartphone. Open the programming app and follow the on-screen instructions to connect to your BT8000 radio.
  3. Program Settings: Use the app interface to adjust various radio settings, including channel frequencies, power levels, and other features.
Image showing the BT8000 radio next to a smartphone displaying the Bluetooth APP programming interface.
Figure 5.2: Bluetooth APP Wireless Programming
QR codes for downloading the programming software for iOS and Android devices.
Figure 5.3: Scan to Download Programming Software (iOS/Android)

6. Operating Instructions

6.1 Basic Operations

  • Main Frequency Selection: On the standby screen, press the EXIT key to select the main frequency. A frequency highlighted in blue indicates it is the main frequency, while others are secondary.
  • PTT Function: To transmit, press the PTT key. If operating on the A segment, it transmits on the A segment frequency. If operating on the B segment, it transmits on the B segment frequency.
  • Channel Mode / Frequency Mode Switching: This function allows you to switch between channel mode and frequency mode.
  • PF2, PF3 Side Key Functions: These side keys can be configured via programming software for various functions such as radio reception, power switching, monitoring, scanning, frequency scanning, flashlight, and SOS.
  • Keypad Lock / Unlock: From the standby screen, long press the # key to lock or unlock the keypad.
  • Dual Watch Function: Enable dual watch via Menu → 07 → Dual Watch. This allows monitoring both main and secondary frequencies without switching.
  • Voice Control Function (VOX): Enable via Menu → 04 → Voice Control Settings. This function automatically enters transmission mode when the microphone detects a sufficiently loud sound. The voice control level and delay time (Menu → 37) can be adjusted.
  • FM Radio: Assign a side key function to the radio. Supports 65-76/76-108 MHz. Use the MENU key to switch bands. Set frequency directly with the numeric keypad. Short press # key for auto search.
  • Frequency Scanning Function: Assign a side key function to frequency scanning. This detects transmitter carrier frequency and sub-audio frequency information. After detection, press MENU to save to a channel list. Supports 136-174/400-520 MHz bands.
  • SOS Function: Assign a side key function to the Alarm key. Menu → 45 → Alarm Settings. Supports three modes: Local Alarm (device emits tone without transmitting), Transmit Alarm Tone (transmits tone signal), and Transmit Alarm Code (transmits code signal).
  • Emergency Flashlight & Strobe Light: Assign a side key function to the Flashlight key to turn on/switch between lighting modes/turn off. (Note: This radio model does not have a flashlight function as per product description).
  • Scanning Function: Assign a side key function to the Scan key. Supports channel list scanning and frequency step scanning. Set mode via Menu → 22 → Scan Mode Settings. Three scanning methods: Time (resumes after 5s if no action), Carrier (stops on signal, resumes 5s after signal disappears), Search (stops on signal).
  • PTT-ID Function: Transmit identity or call codes via DTMF. Configurable through "Programming Software → Edit → DTMF". Three transmission methods: Send on Press, Send on Release, Send Both.

6.2 Menu Function List

The following table details the various menu functions and their settings:

No. Function Secondary Menu Setting/Instructions
0SQL0,...,9Adjust squelch level. Lower level = easier interference, higher level = worse sensitivity.
1STEP2.50K, 5.00K, 6.25K, 10.00K, 12.50K, 20.00K, 25.00K, 50.00KIn frequency mode, use up/down keys to change frequency step value.
2TXPHIGH, Middle, LOWSet transmission power (High, Middle, Low).
3SAVEOFF, 1, 2, 3Battery Saving modes (Off, Level 1, Normal Saving, Super Saving).
4VOX1,2,...,9Activate voice control sensitivity. Level 1 is most sensitive.
5W/NWIDE, NARROWSelect Wide or Narrow mode.
6ABRON, 5s/10s...3minBackground light always on, or set time for background light to automatically turn off.
7DWOFF, ONDouble guard close/open.
8BEEP PROMPTOFF, ONTurn off/on operation prompt.
9TOT15S,...,75STransmission time limit (30-480s, indicated in 30s steps).
10MEMCH001,...,256Indicate channel number to be stored. 'CH' means channel has parameters.
11DELCH001,...,256Delete channel parameters. No 'CH' means no parameters.
12R-CTCSSOFF, 67.0Hz,...,254.1HzNone CTCSS or Standard/nonstandard CTCSS via keypad.
13R-DCSOFF, D023N,...,D754INone DCS or Standard DCS.
14T-CTCSSOFF, 67.0Hz,...,254.1HzNone CTCSS or Standard/nonstandard CTCSS via keypad.
15T-DCSOFF, D023N,...,D754INone DCS or Standard DCS.
16VOICEPRIOFF, Encryption 1, 2, 3Special encryption method to prevent eavesdropping or interference.
17CH-NAMECOMMOM NAME LISTUse programming software to write channel names.
18ROGEROFF, BEEP, TONE1200Turn off/on Roger beep or TONE1200.
19VOICEOFF, ONTurn off/on voice prompt.
20LANGUAGEENGLISH, CHINESESelect English or Chinese display.
21BCLOFF, ONTurn off/on Busy Channel Lockout.
22SC-REVTO, CO, SEScanning modes: Time (pauses 5s), Carrier (pauses on signal), Search (exits on signal).
23PF21.Weather Forecast, 2.Alarm, 3.Radio, 4.Transmit Power, 5.Scan, 6.Frequency SweepSelect function for short press PF2 shortcut.
24PF2 LONG PRESS1.Radio, 2.Scan, 3.Transmit Power, 4.Frequency Sweep, 5.Weather Forecast, 6.Flashlight, 7.AlarmSelect function for long press PF2 shortcut.
25PF31.Radio, 2.Scan, 3.Transmit Power, 4.Frequency Sweep, 5.Weather Forecast, 6.Flashlight, 7.AlarmSelect function for short press PF3 shortcut.
26OFFSET00.000...99.995, OFFFrequency difference between transmitting and receiving frequencies. Turn off to disable.
27SFT-D+, -TX frequency = RX frequency + difference, or TX frequency = RX frequency - difference.
28POWER ON MSGLOGO, VOLTAGEDisplay Photo or Battery voltage on power-on.
29S-CODE DTMF1,2,3...15Set or send DTMF numeric codes for remote control, identity verification, or selective calling.
30DTMF CODEOFF, BOT, EOT, BOTHTurn off, Press PTT to transmit, Release PTT to transmit, or Both.
31DTMFSTOFF, DT-ST, ANI-ST, DT+ANINo DTMF prompt, DTMF prompt on press, DTMF prompt on auto transmit, DTMF prompt on auto transmit and press.
32AUTOLOCKOFF, 5S, 10S, 15STurn off auto keypad lock, or set timing for auto lock.
33SCAN ADDDelete, ADDRemove/include channel from scan list.
34TONE1000hz, 1450hz, 1750hz, 2100hzConfigure transmit/receive sub-tones.
35PTT-LT0,100,...,1000MsDelay time before automatic DTMF transmitting (Unit Ms).
36MENU EXIT TIME5,10,...,60secControl the time of menu automatically exit.
37VOX DELAY0.5sec...2.0secDelay time to turn off PTT after voice activated launch.
38RP-STEOFF, 1,2,3,4,5....10SEliminate noise from repeater delay. Set to OFF if not needed.
39RPT-RLOFF, 1,2,3,4,5....10SAdjust repeater transmission delay time to confirm signal relay. Set to OFF if not needed.
40MDF-AFREQ, CH, NAMEA band display mode: Frequency, Channel, or Channel Name.
41MDF-BFREQ, CH, NAMEB band display mode: Frequency, Channel, or Channel Name.
42TX-A/BOFF, A, BIn dual standby mode, transmitting current frequency band, or press PTT to transmit A/B band for cross-band TX/RX.
43STEOFF, ONAfter releasing PTT, radio sends turn-off code to suppress instant noise of receiver.
44AL-MODON SITE, SEND SOUND, SEND CODEOn-site Emergency, Send emergency voice, Send emergency code.
45SCRAMBLEOFF, ONVoice content transmitted in plain text or scrambled to prevent eavesdropping.
46NOISE REDUCTIONOFF, ONTurn off/on noise reduction.
47BLUETOOTHOFF, ONDisable/enable Bluetooth functions.
48RESETVFO, ALLMenu back to factory setting (VFO only) or Menu and channel back to factory setting (ALL).
49VERSIONSoftware version, Hardware versionDisplays V0.01 (Software) and V1.1B (Hardware).
50SW RX ModulatioFM, AMSwitch modulation mode of current channel to FM or AM.

7. User Tips

  • For optimal performance, ensure your battery is fully charged before extended use.
  • Familiarize yourself with the customizable side keys (PF2, PF3) to quickly access frequently used functions.
  • When using the Bluetooth APP for programming, ensure your radio's Bluetooth function is enabled for a successful connection.
  • Regularly check the menu settings for squelch level (SQL) and transmission power (TXP) to optimize communication for your environment.

8. Maintenance

To ensure optimal performance and extend the lifespan of this product, please follow these guidelines for daily maintenance and cleaning.

8.1 Daily Maintenance

  • Do not pierce or scratch the product with hard objects.
  • Do not store the product in environments containing chemical corrosive substances.
  • Do not carry or use the product by pulling the earphone cable.
  • When not using the earphone jack, cover the interface with the protective cap.

8.2 Cleaning Procedure

Before cleaning, always power off the device and remove the battery:

  1. Regularly use a dry, clean, lint-free cloth or a soft brush to remove dust from the product surface and charging terminals.
  2. If the buttons or casing become dirty, use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals as they may damage the surface casing.
  3. After cleaning, ensure the product is completely dry before use.

9. Troubleshooting

If you encounter issues with your BT8000 radio, please refer to the following common troubleshooting steps:

  • No Power: Ensure the battery is fully charged and correctly installed. Check the charging cable and adapter if the device is not charging.
  • Cannot Transmit/Receive: Verify that the radio is in the correct frequency or channel mode. Check the antenna connection. Ensure the squelch level (SQL) is not set too high.
  • Poor Audio Quality: Check the volume level. Ensure the antenna is securely connected. If using VOX, adjust the sensitivity.
  • Keypad Unresponsive: Check if the keypad lock is active (indicated by the lock icon). Long press the # key to unlock.
  • Programming Issues via APP: Ensure Bluetooth is enabled on both the radio and your smartphone. Make sure the app is up to date.
  • Radio Not Scanning: Verify that the scanning function is enabled and configured correctly in the menu (SC-REV).
  • Device Freezes/Unresponsive: Try performing a reset. You can reset VFO settings or all settings via Menu → 48 → RESET. Note that a full reset will erase all custom settings.

If the problem persists after attempting these steps, please consult the full user manual PDF or contact customer support.

10. Specifications

10.1 General

  • Model Number: Bintolk BT8000
  • Storage Channel: 256
  • Frequency Range: 108-136MHz (RX), 144-148MHz, 156-163MHz, 220-260MHz, 27Mhz, 300-390MHz, 400-520MHz, 430-440MHz, 446MHz, 462-467MHz, 470-600MHz, 65-108MHz, 136-174MHz
  • Walkie Talkie Type: Portable
  • Is_Display: Yes
  • Maximum Range: 5km-10km
  • Material: Plastic
  • Waterproof / Water-Resistant: IP45
  • Battery Capacity: 5600mAh
  • Battery Included: Yes
  • Operation Temperature: -20℃ to 40℃
  • Antenna Impedance: 50Ω
  • Power Requirement: 7.4VDC
  • Certification: CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee
  • Use: Others (Amateur, Marine, Police, Aviation)

10.2 Transmitting

  • Output Power: 10w-25w
  • Audio Distortion: ≤5%
  • Audio Power: ≤500mW

10.3 Receiving

  • Frequency Stability: ±2.5ppm
  • Audio Distortion: ≤5%
Detailed view of the BT8000 radio's ports and controls, including the Type-C charging port, antenna connector, and side buttons.
Figure 10.1: BT8000 Radio Details

11. Warranty and Support

11.1 Warranty Terms

The warranty period for this product starts from the date of sale (based on the date on the sales invoice). The main unit is covered for 12 months, and the battery and charging accessories are covered for 6 months. The following cases will require paid repair services during the warranty period:

  1. Failure to present this warranty card and the purchase invoice.
  2. This card shows signs of alteration or does not match the product.
  3. Defects and damages caused by using this product under non-standard conditions.
  4. Defects and damages caused by misuse, accidents, water ingress, or negligence.
  5. Defects and damages resulting from improper testing, operation, repair, installation, modification, or adjustment.
  6. Defects and damages caused by unauthorized repairs or disassembly.
  7. Defects and damages caused by force majeure.
  8. Normal wear and tear from regular use.

This warranty card serves as an important proof for the end user to enjoy warranty services. It must be stamped and filled out completely by an authorized dealer to be valid. Please keep it safe.

11.2 Additional Resources

A detailed user manual in PDF format is available for download. This document contains additional information and diagrams that may be helpful for advanced users or specific troubleshooting scenarios.

Reference: BT8000 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.