Tuya Temperature Humidity Sensor

Contents

Tuya Zigbee Temperature Humidity Sensor User Manual

Your guide to setting up and using your smart environment sensor.

1. Introduction

The Tuya Zigbee Temperature Humidity Sensor is a smart device designed to monitor the ambient temperature and humidity in your home in real-time. Utilizing Zigbee 3.0 protocol, it integrates seamlessly with your Tuya Smart Life ecosystem, allowing you to track environmental conditions via a mobile app and even integrate with voice assistants like Amazon Alexa and Google Assistant. This sensor helps create a more comfortable and healthy living environment by providing accurate data and enabling smart automations.

Tuya Zigbee Temperature Humidity Sensor with features like Zigbee 3.0, Alexa/Google compatibility, real-time monitoring, and long battery life.
Figure 1: Tuya Zigbee Temperature Humidity Sensor and its key features.

2. Setup

2.1 What's in the Box

  • Tuya Zigbee Temperature Humidity Sensor

Note: 2 x AAA batteries are NOT included and must be purchased separately. A Tuya Zigbee Wireless Gateway Hub is REQUIRED for this sensor to function.

2.2 Prerequisites

  • A Tuya Zigbee Wireless Gateway Hub (connected to your home Wi-Fi network).
  • Smart Life or Tuya Smart App installed on your smartphone.
  • 2 x AAA batteries.

2.3 Installation and Pairing

  1. Insert Batteries: Gently slide open the back cover of the sensor. Insert two AAA batteries, ensuring correct polarity. Close the cover securely.
  2. Prepare Gateway: Ensure your Tuya Zigbee Wireless Gateway Hub is powered on and already added to your Smart Life/Tuya App.
  3. Open App: Launch the Smart Life/Tuya App on your smartphone.
  4. Add Subdevice: Navigate to your Zigbee Gateway in the app. Tap on 'Add subdevice' or a similar option to begin the pairing process.
  5. Activate Pairing Mode on Sensor: Press and hold the reset button (usually a small pinhole or button on the side/back) on the Temperature Humidity Sensor for approximately 5 seconds. The LED indicator on the sensor will begin to flash rapidly, indicating it's in pairing mode.
  6. Confirm in App: In the app, confirm that the LED is blinking rapidly and proceed with the device search.
  7. Device Discovery: The app will discover the sensor. Once found, follow the on-screen prompts to add it to your gateway.
  8. Rename Device (Optional): After successful pairing, you can rename the sensor for easier identification (e.g., 'Living Room Sensor', 'Bedroom Temp').
Diagram showing the network connection: Sensor connects to Zigbee Hub, which connects to WiFi Router, then to Tuya Cloud Services, and finally to the mobile App.
Figure 2: Network Connection Diagram.
Video 1: Step-by-step guide on how to set up the Temperature Humidity Sensor.

3. Operating Instructions

3.1 Real-time Monitoring

Once paired, open the Smart Life/Tuya App and select your sensor. You will see the current temperature and humidity readings displayed in real-time on the main sensor interface.

3.2 Data Storage & Records

The app stores historical data for temperature and humidity, allowing you to view trends over days, weeks, or months. This feature helps you understand environmental changes in your home.

Screenshot of the app showing temperature and humidity data graphs over time.
Figure 3: App interface displaying historical temperature and humidity data.

3.3 Temperature Unit Switch

You can switch the temperature unit between Celsius (°C) and Fahrenheit (°F) within the sensor's settings in the Smart Life/Tuya App. After changing the unit in the settings, you may need to press the reset button on the sensor once for the change to take effect.

Screenshot of the app showing the option to switch temperature units between Celsius and Fahrenheit.
Figure 4: Switching temperature units in the app.

3.4 Abnormal Alarm

You can set custom temperature and humidity thresholds in the app. If the current readings exceed or fall below these set limits, the sensor will automatically trigger an alarm, and the app will push a notification to your smartphone.

Image showing the sensor triggering an alarm and a corresponding notification on the smartphone app.
Figure 5: Abnormal Alarm notification.

3.5 Smart Scene Linkage

Leverage the sensor data to create smart automation scenes within the Smart Life/Tuya App. For example, you can set up a scene to automatically turn on a humidifier if the humidity drops below a certain level, or activate an air conditioner if the temperature rises too high.

3.6 Voice Control

Integrate your sensor with Amazon Alexa or Google Assistant. Once linked, you can ask your voice assistant for the current temperature and humidity readings in the room where the sensor is placed.

User interacting with Alexa and Google Assistant devices to get temperature readings from the sensor.
Figure 6: Voice control with Alexa and Google Assistant.

3.7 Sharing Function

You can share control and access to your sensor's data with family members through the Smart Life/Tuya App. This allows multiple users to monitor the indoor environment.

Family members using their smartphones to monitor the sensor data, illustrating the sharing function.
Figure 7: Sharing sensor data with family members.

4. Maintenance

4.1 Battery Replacement

The sensor is powered by two AAA batteries. The Smart Life/Tuya App provides a low voltage monitoring reminder. When the battery level is low, replace both AAA batteries to ensure continuous operation. To replace, slide open the back cover, remove old batteries, insert new ones with correct polarity, and close the cover.

4.2 Cleaning

To clean the sensor, gently wipe its exterior with a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.

5. Troubleshooting

  • Sensor Not Connecting/Offline:
    - Ensure your Tuya Zigbee Wireless Gateway Hub is powered on and connected to your home Wi-Fi.
    - Check if the sensor batteries are correctly inserted and have sufficient charge.
    - Try re-pairing the sensor by following the 'Installation and Pairing' steps.
  • Inaccurate Readings:
    - Ensure the sensor is placed in an area away from direct sunlight, heat sources (e.g., radiators, ovens), or cold drafts (e.g., open windows, air conditioning vents) that could affect readings.
    - Allow a few minutes for the sensor to stabilize after placement or battery change.
  • No Data in App:
    - Verify your smartphone has an active internet connection.
    - Check if the Smart Life/Tuya App has necessary permissions enabled on your phone.

6. Specifications

FeatureSpecification
Model NumberTemperature Humidity Sensor
OriginMainland China
Smart Home PlatformAlexa, Tuya, Google Assistant
CertificationCE
Battery TypeAAA 1.5V * 2 (Not included)
Working Temperature-10℃ ~ 60℃
Working Humidity0% ~ 95%RH
Zigbee ProtocolZigbee 3.0 (Requires Zigbee Hub)
Temperature Resolution0.1 °C
Humidity Resolution1%
Temperature Accuracy±0.3°C
Humidity Accuracy±3%
Working VoltageDC 3.0V
Standby Current≤5uA
Standby Time≥ 12 Months
Dimensions7.2cm x 2.5cm x 2cm (approx. 2.83in x 0.98in x 0.79in)
Diagram showing the dimensions and key product parameters of the sensor.
Figure 8: Product Dimensions and Parameters.

7. User Tips

  • Zigbee Hub is Essential: Remember that this sensor requires a Tuya Zigbee Wireless Gateway Hub to function. It cannot connect directly to Wi-Fi. Ensure your hub is set up and working correctly before attempting to pair the sensor.
  • Optimal Placement: For the most accurate readings, place the sensor in a central location within the room, away from direct sunlight, heating/cooling vents, or areas with high air circulation.

8. Warranty & Support

For detailed warranty information, technical support, and further operational guidelines, please refer to the complete User Manual PDF provided by the seller. This document contains comprehensive details that may not be covered in this quick start guide.

You can typically find the official PDF manual on the product's purchase page or by contacting the seller directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.