amagi Wind-Powered Car LED Daytime Running Light

Contents

User Manual: Wind-Powered Car LED Daytime Running Lights

Model: Wind-Powered Car LED Daytime Running Light

Brand: amagi

I. Product Overview

The amagi Wind-Powered Car LED Daytime Running Lights are an innovative auxiliary lighting solution for vehicles. These lights are designed to activate automatically using wind power, eliminating the need for external wiring or batteries. They offer high brightness and are suitable for a wide range of cars and motorcycles.

Product overview of wind-powered LED daytime running lights showing multicolor RGB, cool white, and ice blue options, along with key features like no wires, automatic activation, universal fit, waterproof, easy install, and high brightness.
Product overview showing available light colors and key features.

Key Features:

  • Wind-Powered: No external wiring or batteries required.
  • Automatic Activation: Lights up when vehicle speed reaches approximately 40 horsepower (referring to the wind speed equivalent needed for activation).
  • High Brightness: Equipped with 8-10 high-brightness LED chips per light.
  • Universal Fit: Designed for use on various cars and motorcycles.
  • Durable Construction: Made from ABS material, waterproof for reliable outdoor use.
  • Easy Installation: Features an adjustable mounting bracket and double-sided adhesive tape for simple setup.
  • Multiple Color Options: Available in Cool White, Ice Blue, and Multicolor (RGB) variants.

II. Safety Information

  • Do not overload the product or attempt to modify its internal components.
  • Observe safe operating procedures during installation and use.
  • Avoid dropping the lights to prevent damage.
  • Keep out of reach of children.
  • Ensure the installation location does not obstruct vehicle sensors or other critical components.

III. Installation Guide

These lights are designed for easy, non-wired installation. Follow these steps for proper mounting:

  1. Prepare the Surface: Clean the desired installation area on your vehicle to ensure it is free of dust, dirt, and grease.
  2. Unscrew the Bracket: Use a screwdriver to loosen the screw on the mounting bracket of the LED light.
  3. Adjust Position: Adjust the bracket to the correct angle and position for optimal airflow and visibility. Tighten the screws securely once the desired position is achieved.
  4. Remove Protective Film: Carefully tear off the red protective film from the double-sided adhesive tape on the back of the light.
  5. Install Light: Firmly press the light onto your preferred location. Common installation spots include the forward air outlet, front grille, or bumper area. Ensure a strong adhesion.
Four-step installation tutorial for the wind-powered LED lights: 1. Unscrew, 2. Adjust and tighten, 3. Tear off protective film, 4. Install in preferred location.
Step-by-step installation instructions.

Note: The lights are wind-powered and do not require any electrical wiring or batteries. They are activated by the vehicle's movement.

IV. Operating Instructions

The amagi Wind-Powered Car LED Daytime Running Lights are designed for automatic operation:

  • Once installed, the lights will automatically illuminate when your vehicle reaches a speed sufficient to generate wind power (approximately 40 horsepower equivalent wind speed).
  • The integrated wind turbine converts kinetic energy from airflow into electrical energy to power the LEDs.
  • No manual switching is required for activation or deactivation.
Two wind-powered LED lights installed on a car's front grille, emitting cool white light.
Example of lights emitting cool white light when active.
Two wind-powered LED lights installed on a car's front grille, emitting ice blue light.
Example of lights emitting ice blue light when active.

V. Maintenance

To ensure the longevity and optimal performance of your wind-powered LED lights, consider the following maintenance tips:

  • Regular Cleaning: Periodically clean the surface of the lights and the wind turbine to remove any accumulated dirt, dust, or debris. This ensures maximum light output and efficient wind power generation.
  • Check Adhesion: Occasionally inspect the double-sided adhesive tape to ensure the lights remain securely attached to your vehicle. Re-apply or reinforce if necessary.
  • Inspect for Damage: Before each use, quickly inspect the lights for any visible damage or loose components.
  • Waterproof Design: The lights are designed to be waterproof, but avoid direct high-pressure water jets on the wind turbine to prevent potential damage to the rotating mechanism.

VI. Troubleshooting

Common Issues and Solutions:

Problem Possible Cause Solution
Lights do not turn on.
  • Insufficient vehicle speed for wind activation.
  • Wind turbine obstructed or damaged.
  • Improper installation preventing airflow.
  • Increase vehicle speed to above 40 horsepower equivalent wind speed.
  • Check for debris or damage to the wind turbine; clean or replace if necessary.
  • Re-install in a location with clear, unobstructed airflow.
Lights are dim or flicker.
  • Low vehicle speed.
  • Dirt or grime on the LED surface.
  • Maintain consistent vehicle speed.
  • Clean the LED surface thoroughly.
Light falls off the vehicle.
  • Adhesive tape not properly applied or worn out.
  • Installation surface was not clean.
  • Clean the surface and re-apply with new, strong double-sided automotive adhesive tape.

If the problem persists after attempting these solutions, please contact customer support.

VII. Specifications

Feature Detail
Item Type Day Light (Daytime Running Light)
Voltage 12 V (Generated by wind power)
Material ABS
Size (Length x Width x Height) 12 cm x 4 cm x 2 cm (approx.)
LED Quantity 8 pcs per light
Special Features Wind Power, Waterproof, High Brightness, Easy Install
Color Options Cool White, Ice Blue, Multicolor (RGB)
Activation Speed Lights up when vehicle speed reaches approximately 40 horsepower equivalent wind speed.
Diagram showing the dimensions of the LED light: 12cm length, 4cm width, 2cm height.
Approximate dimensions of the LED light.

VIII. User Tips

  • For optimal brightness and consistent operation, ensure the lights are installed in a location that receives direct and unobstructed airflow when the vehicle is in motion.
  • Consider installing a pair of lights for balanced illumination and aesthetic appeal.
  • Regularly check the mounting to ensure the lights remain firmly attached, especially after driving at high speeds or through rough terrain.
  • While the lights are waterproof, avoid prolonged submersion or direct high-pressure washing of the wind turbine mechanism.

IX. Warranty and Support

For any issues, questions, or to report a malfunctioning product, please contact the after-sales service of your retailer. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. You can access it via this link: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.