1. Product Overview
The 7-in-1 Tuya Zigbee USB+ Solar Water Quality Meter is a professional device designed for comprehensive water analysis in various aquatic environments. It simultaneously measures pH, Free Chlorine (CL), Oxidation-Reduction Potential (ORP), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity, and Temperature. Featuring both USB and solar charging, a floating waterproof design, and seamless integration with the Smart Life app via a dedicated gateway, this meter provides convenient and accurate real-time monitoring of your water quality.
Figure 1: Product overview showing the meter, gateway, and app interface.
Figure 2: Visual representation of the meter's key features.
2. Package Contents
- 1 x Water Quality Monitor
- 1 x Gateway
- 1 x Plastic Wrench
Figure 3: The included gateway device.
3. Setup Guide
3.1 Initial Charging
The device can be charged via USB or its integrated solar panels. Ensure the device is sufficiently charged before first use.
Figure 4: The meter features solar panels for continuous charging.
3.2 App Installation and Gateway Connection
- Download the "Smart Life" application from your device's app store.
- Follow the in-app instructions to add the gateway device.
- Ensure the water quality monitor is within range of the gateway for seamless data transmission.
3.3 Preparing the Meter for Measurement
- Before measurement, carefully remove the electrode cover from the bottom of the meter.
- Ensure the high-precision electrodes are clean and free from debris.
- Once ready, place the meter directly into the water. Its floating design allows it to remain on the surface for continuous monitoring.
Video 1: Demonstrates the removal of the electrode cover and the floating capability of the meter.
4. Operating Instructions
Once the meter is placed in the water and connected to the Smart Life app via the gateway, it will begin taking simultaneous measurements of all seven parameters. You can view real-time data, manage historical readings, and share information directly through the app.
- Real-time Monitoring: Open the Smart Life app to see current readings for pH, CL, ORP, EC, TDS, Salinity, and Temperature.
- Data Management: The app allows you to save and manage your water quality data over time, helping you track trends and make informed decisions about water treatment.
- Remote Access: With the Zigbee gateway and WiFi connection, you can monitor your water quality remotely from anywhere.
Figure 5: Example of recommended water quality parameters for pools.
5. Maintenance
5.1 Electrode Care
After each use, or periodically, remove the meter from the water and gently clean the electrodes with distilled water. Ensure no residue builds up on the sensors. Replace the electrode cover when not in use to protect the sensors.
5.2 Calibration
The product is factory-calibrated. However, if you need to recalibrate it later, you will need to prepare your own calibration fluid or calibration powder. The device supports calibration for pH, EC, and ORP with the following standard values:
- pH Calibration: 6.86/4.00/9.18 or 7.00/4.00/10.01
- EC Calibration: 1413uS/cm, 12.88ms/cm
- ORP Calibration: 222mv
Note: Calibration fluid/powder is NOT included due to logistics restrictions and must be prepared by yourself if recalibration is required.
Figure 6: The meter and gateway. Calibration solution is not included.
5.3 Waterproof Rating
The meter has an IP67 waterproof rating, making it suitable for short-term immersion. Ensure the device is properly sealed before placing it in water.
6. Troubleshooting
- Inaccurate Readings: Ensure electrodes are clean. Recalibrate if necessary using appropriate calibration solutions.
- No Data in App: Check if the gateway is properly connected to WiFi and the meter is within range of the gateway. Verify the Smart Life app is updated and the device is added correctly.
- Device Not Charging: Ensure the USB cable is securely connected or that the solar panels are exposed to sufficient sunlight.
For further assistance, please refer to the official user manual PDF or contact customer support.
7. Specifications
| Parameter | Range | Resolution | Accuracy |
|---|---|---|---|
| pH | 0.0-14.0 pH | 0.1 pH | ±0.1 pH |
| Free Chlorine (CL) | 0.0-4.0 mg/L | 0.1 mg/L | ±0.1 mg/L |
| ORP | ±999 mV | 1 mV | 15 mV |
| Salinity | 0-999 ppm; 1000-9990 ppm | 1 ppm, 10 ppm | ±2% F.S. |
| TDS | 0-999 ppm; 1000-9990 ppm | 1 ppm to 10 ppm | ±2% F.S. |
| EC | 0-2000 µS/cm; 2000-9990 µS/cm; 10.01-19.9 mS/cm | 1 µS/cm, 10 µS/cm, 0.01 mS/cm | ±2% F.S. |
| Temperature | 0.0℃-50.0℃ (32.0℉-122℉) | 0.1℃/0.1℉ | ±0.5℃ |
- Charging Method: USB or Solar
- Battery Capacity: 1500 mAh
- Support APP: Smart Life
- Casing Material: ABS
- Product Size: Approximately 210.00 x 165.00 x 165.00 mm (8.27 x 6.5 x 6.5 inches)
- Waterproof Rating: IP67 (for short-term immersion)
Figure 7: Product dimensions.
8. User Tips
- Continuous Monitoring: Utilize the floating design and solar charging for uninterrupted water quality monitoring in your pool or aquarium.
- Remote Access: Take advantage of the Smart Life app and Zigbee gateway to check your water parameters from anywhere, ensuring peace of mind.
- Regular Cleaning: Periodically clean the electrodes to maintain measurement accuracy and prolong the life of your device.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the seller's policies or contact the manufacturer directly. A comprehensive user manual in PDF format is available for download at this link.