ANYFAR Carplay Android Auto Linux Touch Screen for BMW E70 E71

Contents

Wireless Carplay Android Auto Linux Touch Screen User Manual

Model: Carplay Android Auto Linux Touch Screen for BMW E70 E71

Brand: ANYFAR

1. Product Overview

This multimedia infotainment system upgrades your vehicle with a modern Linux-based touch screen, integrating advanced connectivity features like Wireless CarPlay, Android Auto, Mirror Link, and HiCar. Designed for seamless integration with your car's original system, it enhances your driving experience with navigation, music, communication, and more.

Key Features:

  • Linux 5.4 System: Stable and efficient operating system.
  • 12.6-inch 2K Display: Ultra-wide IPS screen with 2400x900 high resolution for crisp visuals.
  • Wireless CarPlay & Android Auto: Seamless smartphone integration for navigation, music, and voice control.
  • Mirror Link: Supports wireless/wired screen mirroring for iOS and Android devices.
  • HiCar Support: Deeply integrated smart traveling experience for Huawei smartphone users.
  • Built-in Bluetooth 5.0: For hands-free calling, phone book synchronization, and high-fidelity audio streaming.
  • 5G WiFi: High-speed connectivity for stable wireless connections.
  • Extreme Climate Reliability: Operates flawlessly from -40℃ to +85℃.
  • Professional Video Decoding: Supports 4K@30fps H.265 and 1080P@60fps videos.
  • Enhanced Safety: Supports dual-channel AHD/CVBS video input for rearview and parking assistance.
  • Intelligent Power Management: Advanced deep standby mode with ultra-low current (≤3mA) to protect battery health.

2. Setup and Installation

2.1 Package Contents

Before installation, please verify that all items are present:

  • Main Unit (approx. 13.6cm x 7cm x 2.2cm)
  • Power Cable
  • LVDS Cable (1 pc)
  • WIFI Antenna
Product Information and Accessories
Figure 2.1: Product Information and Accessories. This image displays the main unit with its dimensions (13.6cm x 7cm x 2.2cm) and the included accessories: power cable, LVDS cable, and WiFi antenna.

2.2 Applicable Vehicle Models

This system is compatible with various BMW and Mercedes-Benz models. Please confirm your car's original system before installation.

For BMW:

  • BMW X5 X6 E70 E71: 2007-2013 (CCC/CIC Systems)
  • BMW 5-Series E60: 2003-2008 (CCC System)
Applicable BMW Models and Years
Figure 2.2: Applicable BMW Models and Years. This diagram shows compatibility for BMW 5-Series E60 (2003-2008) with CCC system, and visual examples of CCC, CIC, NBT, and EVO interfaces, indicating which are compatible (CCC, CIC) and which are not (NBT, EVO).

For Mercedes-Benz (NTG 5.0 System):

  • A Class: W176 (2016-2018)
  • B Class: W246 (2016-2018)
  • CLA Class: C117 (2016-2018)
  • CLS Class: W218 (2015-2016)
  • E Class: sedan W212 (2015), coupe C207 A207 (2015)
  • G Class: W463 (2016-2017)
  • GLA Class: X156 (2016-2018)
  • GLC Class: X253 C253 (2015-2018)
  • GLE GLS Class: W167 X166 (2016-2018)
  • SLK: R172 (2016-2018)
  • S Class: W222 (2014-2018)
  • CL Class: W216 C216 (2014-2018)
  • V Class: W447 (2015-2018)
  • X Class: W470 (2015-2018)
Suitable Mercedes-Benz Models
Figure 2.3: Suitable Mercedes-Benz Models for NTG 5.0 System. This image lists various Mercedes-Benz models and their corresponding years (2014-2018) that are compatible with the NTG 5.0 system, alongside a visual of the NTG 5.0 interface.

2.3 Confirming Your Car System

It is crucial to identify your car's original system type (CCC, CIC, NBT, EVO, NTG 5.0) and its LVDS plug configuration before proceeding with installation.

Confirm Car System LVDS Plugs
Figure 2.4: Confirm Your Car System. This image provides a visual guide to identify different BMW system types by their LVDS plug: CCC System (10 pin LVDS plug), CIC System (4 pin LVDS plug), NBT System (6 pin LVDS plug), and EVO System (6 pin LVDS plug).
Confirm Mercedes-Benz NTG System
Figure 2.5: Confirm Your Mercedes-Benz NTG System. This image helps identify NTG systems: NTG 4.0 (10PIN) and NTG 4.5 (4PIN) are marked with an 'X' (incompatible), while NTG 5.0 (4PIN) is marked with a checkmark (compatible), showing visual cues like button layouts and airbag light positions.

2.4 Installation Instructions (NTG5.0 Example)

CAUTION: Never turn on the ignition with the factory radio removed.

2.4.1 Dip Switch Settings

Before connecting power, configure the dip switches on the main unit according to your car model and screen size. Ensure CarPlay POWER is disconnected when adjusting dip switches.

Dip Switch 1Dip Switch 2Car Model
OFFOFFC/GLC/V/S
OFFONA/B/E/CLA/CLS/GLA/GLE/GLS
Dip Switch 3Dip Switch 4Screen Size
OFFON7.4"/8.4" (800*480)
ONOFF8.4" (960*540)
ONON12.3" (1440*540)

2.4.2 Wiring Diagram

Refer to the detailed installation diagram for proper connections. This is a professional installation and should be performed by qualified personnel.

NTG5.0 Installation Diagram
Figure 2.6: NTG5.0 Installation Diagram. This image shows a detailed wiring diagram for the NTG5.0 system, including connections for LVDS, ANT, POWER, camera power supply, rear detect, USB, and AUX. It also illustrates the physical connections to the factory radio head unit and original vehicle connectors.
  • LVDS: Connect to the original vehicle LVDS and the original car's host terminal.
  • ANT: Connect the WiFi antenna (ensure it's not attached to hardware stacks).
  • POWER: Connect Yellow (B+), Red (ACC), Black (GND). Blue wire is for Camera Power Supply.
  • Rear Detect (Brown wire): Connect to the rearview light cable or 360 panoramic detection cable.
  • 360-TX (White) / 360-RX (White and Black): Connect to 360 panoramic universal box.
  • REAR-CVBS: Connect to rearview camera or 360 degree panoramic AHD output.
  • FRONT-CVBS: Connect to the front view camera.
  • AUX: Audio output.
  • USB: Connect mobile phone, USB flash drive, or for software upgrade.

2.4.3 Adding Reversing Camera Wiring

  • Cam-power: Connect to camera power.
  • Rear-CVBS/AHD720P (25FPS/30FPS): Connect to camera input.

3. Operating Instructions

3.1 System Switching

You can switch between the original car system and the new multimedia system using the original car controls.

  • Long press to switch between the original car system and the new multimedia system.
  • Short press to confirm selections.
  • Long press to confirm active voice control.
  • Right dial for 15 seconds to reset the system.
Compatible With Original Car Controls
Figure 3.1: Compatible With Original Car Controls. This image illustrates how to use the original car's iDrive controller and steering wheel buttons to operate the new system, including switching systems, confirming actions, activating voice control, and managing calls and volume.

3.2 Steering Wheel Controls

  • Long press: Switch between systems.
  • Short press (Call button): Connect/answer phone.
  • Short press (End Call button): Hang up phone.
  • Short press (+/- buttons): Increase or decrease volume.
  • Press (Voice Command button): Restart the system.

3.3 Central Control (iDrive) Instructions

  • Long press: Switch between systems.
  • Knob movement: Move the cursor.
  • Short press: Confirm selection.
  • Move left/right: Skip to the next/previous song.
  • Long press: Confirm active voice control.
  • Right move for about 15 seconds: Reduce (function not fully specified, likely for specific menu navigation).

3.4 Wireless CarPlay Connection

  1. On your iPhone, open Wi-Fi and Bluetooth.
  2. In the Bluetooth settings, select the device named "CX_BT..." and pair it.

3.5 Wireless Android Auto Connection

  1. On your Android phone, open Wi-Fi and Bluetooth.
  2. In the Bluetooth settings, click on "CX-BTXXXX" and pair it.

3.6 Audio Settings

  • Ensure your phone is connected to the original car's Bluetooth audio.
  • In the system's audio settings, select "Use the original Bluetooth audio" and set it to ON.
  • If the original multimedia selection is AUX, ensure it is correctly configured.

3.7 Camera Functionality

The system supports both factory original and aftermarket cameras.

  • Factory Original: Supports original reverse camera and parking radar.
  • Aftermarket: Supports aftermarket reverse cameras and 360-degree cameras.
  • Parking Guidelines: Dynamic guidance lines and parking distance control are supported.
Support Original Car Settings
Figure 3.2: Support Original Car Settings. This image highlights that the system retains OEM vehicle functions such as the factory system, CD/DVD player, steering wheel control, horn speaker sound output, reversing camera compatibility, and iDrive rotation button functionality.

4. Maintenance

To ensure the longevity and optimal performance of your multimedia system, follow these general maintenance guidelines:

  • Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals or abrasive materials.
  • Temperature Control: While the system is designed for extreme climates, prolonged exposure to direct sunlight or extreme heat/cold when the vehicle is parked can affect performance.
  • Software Updates: Periodically check with the seller for any available software updates to ensure you have the latest features and bug fixes.
  • Avoid Liquids: Keep liquids away from the unit to prevent damage to electronic components.

5. Troubleshooting

If you encounter any issues, please refer to the following troubleshooting steps:

5.1 Display Issues

  • Screen not showing normally: Check the LVDS cable connection and verify the Dip Switch settings are correct for your car model and screen size.

5.2 Audio Issues

  • Sound problems: Check whether the Multimedia and install system settings of the original car are correctly configured. Ensure your phone is properly connected via Bluetooth to the original car's audio system.

5.3 Power Issues

  • Mainframe pilot lamp not working: Check the power cable connection and ensure the fuse is intact and functional.

5.4 General Issues

  • If issues persist after trying the above steps, please consult the detailed user manual PDF provided by the seller or contact customer support.

6. Specifications

FeatureSpecification
Operating SystemLinux 5.4
Processor (CPU)T113-i Dual Core Cortex-A7 (1.2GHz)
Memory (RAM)512MB DDR3 (Expandable up to 2GB)
Storage (ROM)4GB eMMC (Expandable up to 64GB)
Display Size12.6 inch IPS Display
Resolution2K High Definition (2400x900 pixels)
Touch ScreenMulti-point Capacitive Touch Screen
ConnectivityDual-band 5G WiFi + Bluetooth 5.0
Video Decoding4K@30fps H.265 / 1080P@60fps
Video Input2 channel AHD/CVBS Analog High-Definition Input
Interface40 PIN Multi-function Socket (CAN, AUX, Camera, etc.)
Operating Voltage9-16V
Operating Temperature-30°C to +75°C
Stored Temperature-30°C to +85°C
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Power Consumption500mA (rated), 3A (Max)
Shutdown Current3mA (Clock is on)
Quiescent Current<3mA
USB Charging Current2A (host controls current below 1.5A if >1A)

7. User Tips

  • Verify Compatibility: Always double-check your car's specific model, year, and original system type (e.g., CCC, CIC, NTG 5.0) before purchasing and installing to ensure full compatibility.
  • Professional Installation: Due to the complexity of vehicle electronics, professional installation is highly recommended to avoid damage to your vehicle or the product.
  • Backup Settings: Before making significant changes to your car's original system settings, it's advisable to note down or photograph them.
  • Firmware Updates: Keep an eye out for firmware updates from the seller, as these can improve performance, add features, or fix bugs.

8. Warranty and Support

For warranty information, technical support, or any inquiries regarding your product, please contact the seller directly through your purchase platform. Please refer to the official user manual PDF for more detailed instructions and diagrams:

View User Manual (PDF)

© 2024 ANYFAR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.