Tuya Zigbee Water Sensor

Contents

Tuya ZigBee Water Leak Sensor Instruction Manual

Wireless Flood Detector Smart Life APP Alarm Compatible with Zigbee Gateway

1. Important Note & Product Introduction

1.1 Important Note

This is a Zigbee version sensor. A separate Zigbee 3.0 gateway is REQUIRED for operation. Please connect the sensor to a Zigbee gateway first to enable mobile phone remote monitoring and APP push alerts via 3G/4G/WiFi network.

1.2 Product Introduction

The Tuya Zigbee Water Leak Sensor is a high-sensitivity flood detection device designed for home safety. It accurately monitors water leakage and overflow in real time, instantly pushing alarm notifications to your mobile phone. It supports smart scene linkage with other Tuya smart devices, effectively preventing water damage, pipeline leakage, and flooding accidents in kitchens, bathrooms, basements, and water tanks.

2. Main Features

  • Ultra-high Detection Sensitivity: Built-in precision water probe poles trigger an instant alarm once the water depth exceeds 0.5mm, capturing tiny water overflows and leakages at the earliest stage.
  • Real-time APP Alert Notification: Upon water leakage detection, the sensor quickly transmits signals to the Zigbee gateway, and the Tuya Smart Life APP immediately sends reminder messages. Monitor water safety status anytime, anywhere.
  • Intelligent Scene Linkage: Customize intelligent automation scenes in the APP. When water leakage occurs, the sensor can trigger linked actions such as turning on alarms, smart lights, or closing water valves to build an automatic home security protection system.
  • Wireless & Easy Placement: Completely wireless design with no complicated wiring required. The compact body can be freely placed under water heaters, washing machines, kitchen cabinets, sewer pipes, and other vulnerable leakage areas.
  • Low Power Consumption & Long Battery Life: Adopts a low-power microprocessor and optimized Zigbee 3.0 chip. Under normal use (about 20 reminders per day), the battery service life can reach up to 12 months. Equipped with a low-battery reminder function, the APP will actively remind you to replace the battery.
  • Premium Fireproof Material & Wide Application: Made of high-quality fireproof PC + fireproof ABS material, heat-resistant, anti-corrosion, and durable. Widely applicable for families, apartments, hotels, shops, offices, and other indoor places.

3. Product Specifications

ItemParameter
Communication ProtocolZigbee 3.0
Power SupplyDC 3V (CR2032 Battery)
Shell MaterialFireproof PC + Fireproof ABS
System CompatibilityiOS 8.0 / Android 4.0 and above
Working Frequency2.4GHz
Wireless Transmission Distance30~50m (Indoor Barrier-Free Distance)
Working Temperature-10℃ ~ 50℃
Trigger Water Depth≥0.5mm

4. Packing List

  • 1 × Zigbee Water Leak Sensor
  • 1 × User Manual

Note: Battery (CR2032) is NOT included and must be purchased separately.

5. Installation and Setup

Before you begin, ensure you have a Tuya Zigbee 3.0 Gateway connected to your home network.

  1. Insert Battery: Push the mounting bracket upward to open the sensor, then insert a CR2032 battery into the battery compartment.
  2. Download Tuya Smart APP: Download the "Tuya Smart" or "Smart Life" APP from your device's app store (Google Play Store for Android, Apple App Store for iOS) or scan the QR code below.
    QR code for Tuya Smart APP download

    Image: QR code for downloading the Tuya Smart APP.

  3. Add Device to APP:
    • Open the Tuya Smart APP and ensure your Zigbee gateway is already added and online.
    • In the gateway interface, select "Add sub-device" or similar option.
    • Use the provided card pick-up pin (or a similar small tool) to press and hold the reset button on the sensor for more than 5 seconds. The indicator light on the sensor will flash rapidly, indicating it's in pairing mode.
    • The APP will discover the new device. Select "Water Leak Sensor" and follow the on-screen prompts to complete the pairing process.
    • Once successfully added, the sensor will appear in your device list.
  4. Placement: Place the sensor in areas prone to water leaks, such as under sinks, near washing machines, water heaters, in basements, or bathrooms. Ensure the two metal probes on the bottom of the sensor are in direct contact with the surface where water might accumulate.

Setup Demonstration Video

Video: A demonstration of unboxing, battery installation, pairing the water leak sensor with the Tuya Smart Life app via a Zigbee gateway, and testing its water detection functionality.

Zigbee Gateway Requirement

Diagram showing Zigbee Water Leak Sensor connected to a Tuya Zigbee Hub for APP Control and Voice Control.

Image: Diagram illustrating the connection of the Zigbee Water Leak Sensor to a Tuya Zigbee Hub for smart home integration, including APP control and voice control.

Zigbee Water Leak Sensor with a note indicating the requirement of a Zigbee gateway.

Image: The Zigbee Water Leak Sensor, emphasizing the necessity of a Zigbee gateway for its operation.

6. Operation

  1. Normal Monitoring: Once installed and paired, the sensor continuously monitors for water presence in its vicinity.
  2. Water Detection & Alarm: When water is detected and its depth reaches or exceeds 0.5mm, the sensor will immediately trigger an alarm. This alarm signal is sent to your Zigbee gateway.
    Water leak sensor in a sink with water, showing an abnormal alarm notification on a mobile phone.

    Image: The water leak sensor detecting water in a sink, triggering an "Abnormal Alarm" notification on the mobile app.

  3. APP Notification: The Zigbee gateway then pushes a real-time "Water Leakage Alarm" notification to your Tuya Smart Life APP. The app will display the device, type of alert (Flooding Detection State), and the time of the event.
    Mobile phone displaying a water leakage alarm notification from the sensor.

    Image: A mobile phone screen showing a "Water Leakage Alarm" notification, indicating remote monitoring capability.

  4. Event Record: All detection events are recorded within the APP, allowing you to review the history of water leakage incidents.
  5. Smart Scene Linkage: If you have configured smart scenes, the sensor will trigger corresponding actions (e.g., turning on smart lights, activating other alarms) when water is detected.

High Detection Sensitivity

Water leak sensor on a wet floor, indicating high detection sensitivity with red rings.

Image: The water leak sensor on a wet surface, visually representing its high detection sensitivity with radiating red rings.

7. Maintenance

7.1 Battery Replacement

The sensor uses a CR2032 battery. The Tuya Smart Life APP will send a low-battery reminder when replacement is needed.

  1. Push the mounting bracket upward to open the sensor casing.
  2. Carefully remove the old CR2032 battery.
  3. Insert a new CR2032 battery, ensuring correct polarity.
  4. Close the sensor casing securely.

7.2 Cleaning

  • Wipe the sensor with a dry, soft cloth.
  • Do not immerse the main body of the sensor in water.
  • Ensure the metal detection probes on the bottom are clean and free from debris for optimal performance.

7.3 IP68 Waterproof and Dustproof

Water leak sensor submerged in water, highlighting its IP68 waterproof and dustproof rating.

Image: The water leak sensor partially submerged in water, demonstrating its IP68 waterproof and dustproof capabilities for use in complex environments.

8. Troubleshooting

  • Sensor not pairing with gateway:
    • Ensure your Zigbee gateway is powered on and has a stable internet connection.
    • Make sure the sensor is in pairing mode (indicator flashing rapidly). If not, press and hold the reset button for 5+ seconds.
    • Try moving the sensor closer to the Zigbee gateway during pairing.
    • Check the battery level of the sensor. Replace if low.
  • No alerts received on APP:
    • Verify that APP notifications are enabled for the Tuya Smart Life app on your mobile device.
    • Confirm the Zigbee gateway has a stable internet connection.
    • Check the sensor's battery level in the app.
    • Ensure the sensor is within the effective range of the Zigbee gateway (30-50m indoor barrier-free).
  • False alarms:
    • Ensure the sensor is placed on a dry, flat surface.
    • Avoid placing the sensor in areas with high humidity or condensation that might trigger false positives.
    • Clean the metal detection probes to ensure no residue is causing false readings.
  • Sensor not responding:
    • Replace the battery with a new CR2032.
    • Try resetting the sensor by pressing the reset button for 5+ seconds and re-pairing it with the gateway.

9. User Tips

  • Regular Testing: Periodically test your water leak sensor by placing it in a small amount of water (e.g., a shallow dish) to ensure it is functioning correctly and sending alerts to your app.
  • Strategic Placement: Place sensors in all high-risk areas such as under sinks, behind toilets, near water heaters, washing machines, dishwashers, and in basements or utility rooms.
  • Battery Monitoring: Pay attention to low-battery notifications from the app and replace the CR2032 battery promptly to ensure continuous protection.
  • Smart Scene Automation: Maximize the sensor's potential by setting up smart scenes in the Tuya Smart Life app. For example, trigger a smart light to flash or a siren to sound when a leak is detected.

10. Warranty and Support

For any issues, questions, or warranty claims regarding your Tuya ZigBee Water Leak Sensor, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.