LINYILIGHT LED Under Cabinet Light with Remote Control

Contents

LINYILIGHT LED Under Cabinet Light User Manual

1. Safety Precautions

  • WARNING: Be aware of potential fire hazards and strictly follow the instruction manual for charging and storage. For disposal, please consult your local authority's website for further information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
  • Installation Location: Place the lamp on a stable, level surface away from flammable materials.
  • Charger Use: Use a low-voltage charger whenever possible to avoid overvoltage. Unplug the charger after charging is complete.
  • Battery Safety: The product contains a built-in rechargeable battery. Do not attempt to disassemble, short-circuit, crush, or expose the battery to fire.
  • Motion-sensor lamps without switches operate in only one mode and must be used in darkness for optimal functionality.

2. Product Overview

The LINYILIGHT LED Under Cabinet Light is a versatile lighting solution featuring motion sensing, remote control, stepless dimming, and three color temperature options. Its magnetic installation allows for easy placement in various locations.

LED Under Cabinet Lights in use with remote control

Figure 1: LED Under Cabinet Lights installed under a cabinet, controlled by a remote.

Video 1: Product demonstration showing features, installation, and operation.

3. Setup and Installation

3.1 Charging the Device

  • Connect the provided Type-C USB cable to the charging port on the lamp.
  • Connect the other end of the USB cable to a low-voltage USB power adapter (not included).
  • Charging time is approximately 3-4 hours. Unplug the charger once charging is complete.
Charging port and sensors on the lamp

Figure 2: Close-up of the lamp showing the Type-C charging port and occupancy sensors.

3.2 Mounting the Lamp

The lamp features magnetic suction installation for easy placement.

  1. Peel off the protective film from one side of the magnetic adhesive pad.
  2. Attach the adhesive side firmly to the back of the lamp. Press for a few seconds to ensure a strong bond.
  3. Peel off the protective film from the other side of the magnetic adhesive pad.
  4. Attach the lamp to your desired clean, flat surface (e.g., under a cabinet, inside a wardrobe). Press firmly for a few seconds.
  5. The lamp can be easily removed from the mounted magnetic pad for recharging or repositioning.
Magnetic adsorption installation steps

Figure 3: Step-by-step guide for magnetic installation.

4. Operating Instructions

4.1 Manual Switch Operation

The lamp has a multi-function button for control:

  • First Press: Enters 'Always On' mode.
  • Second Press: Enters 'Night Sensing' mode (activates when ambient light is dim).
  • Third Press: Enters 'All-Day Induction' mode (motion sensing active regardless of ambient light).
  • Fourth Press: Turns the lamp OFF.
  • Double-Click (when ON): Toggles between the three color temperatures (Warm, Neutral, White).
  • Long Press (when ON): Activates stepless dimming. Release and press again to dim in the opposite direction.
Functional explanation of one-click control

Figure 4: Diagram explaining the one-click control functions of the lamp's button.

4.2 Remote Control Operation

The included remote control allows for convenient operation of one or multiple lamps simultaneously.

  • On/Off Button: Turns all paired lamps ON or OFF.
  • Color Toggle Button: Cycles through Warm (3000K), Neutral (4000K), and White (6000K) light.
  • Brightness Adjustment Buttons: Increase or decrease brightness.
  • Timer Buttons: Set the lamp to turn off after a specified duration (e.g., 15 min, 30 min, 60 min).
Remote control functions

Figure 5: Remote control showing buttons for on/off, color toggle, and brightness adjustment.

4.3 Motion Sensing Modes

The lamp features two intelligent sensing modes:

  • Human Sensing Mode: Automatically identifies if someone is approaching. The lights turn on when motion is detected and turn off after 30 seconds of no motion.
  • Night Sensing Mode: Automatically recognizes the surrounding brightness. The light turns on only when the environment is dim and motion is detected.
Human and Night Sensing Modes

Figure 6: Explanation of Human Sensing Mode and Night Sensing Mode.

4.4 Brightness and Color Adjustment

  • Stepless Dimming: Long press the manual switch or use the remote control to adjust brightness from 20% to 100%.
  • Three Color Temperatures: Double-click the manual switch or use the remote control to cycle through 3000K (Warm light), 4000K (Neutral light), and 6000K (White light).
Stepless dimming levels

Figure 7: Visual representation of stepless dimming from 20% to 100% brightness.

Three color temperatures

Figure 8: Display of 3000K Warm, 4000K Neutral, and 6000K White light effects.

5. Maintenance

  • Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or immerse the lamp in water.
  • Battery Care: Recharge the battery when brightness is low. Avoid fully discharging the battery for extended periods.

6. Troubleshooting

  • Lamp does not light up: Check whether the battery is sufficiently charged or if the switch is off. Ensure motion-sensing functionality is used in darkness for proper operation.
  • Low brightness: The battery may need recharging. Adjust brightness settings using the manual switch or remote control.

7. Specifications

FeatureSpecification
Product NameMotion Sensor Light
Product SizeDiameter 8.1cm, Height 1.4cm
Product Power0.5W
Lamp Bead Model2835 lamp beads
Product ColorWhite
Charging Time3-4 hours
Battery LifeUp to 14.5 hours (depending on usage)
Color TemperatureTrichromatic (3000K, 4000K, 6000K)
BrightnessInfinitely adjustable (stepless dimming)
InstallationMagnetic mounting
Lifespan10,000 Hours
Voltage5V
Power SourceRechargeable battery
MaterialPVC
DimmableYes
Bulbs IncludedNo (integrated LED)
Luminous Flux<60
Product parameters table

Figure 9: Detailed product parameters.

High-capacity battery life and charging time

Figure 10: Battery life and charging duration details.

8. User Tips

  • For easier removal and charging, some users prefer to use alternative mounting methods like Velcro instead of the provided adhesive magnets.
  • Experiment with different color temperatures to create the desired ambiance for your space.

9. Warranty and Support

This product complies with relevant EU legislation, indicated by the CE RoHS marking.

For any issues, questions, or support needs, please contact the seller directly through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.